Single face compaction on laboratory marshall specimen towards satisfactory degree of compaction and thickness

Investigation on the performance of bond strength between pavement layers has gain serious attention from researchers worldwide. Typical method to prepare the double layered testing specimen at laboratory scale is to follow the Marshall procedure or to perform coring on constructed field scale test...

Full description

Bibliographic Details
Main Authors:	Haryati Yaacob, Mohd Rosli Hainin, Fung, Lung Chang
Format:	Article
Language:	English
Published:	Universiti Kebangsaan Malaysia 2014
Online Access:	http://journalarticle.ukm.my/6861/ http://journalarticle.ukm.my/6861/ http://journalarticle.ukm.my/6861/1/19_Haryati_Yaacob.pdf

id	ukm-6861
recordtype	eprints
spelling	ukm-68612016-12-14T06:42:24Z http://journalarticle.ukm.my/6861/ Single face compaction on laboratory marshall specimen towards satisfactory degree of compaction and thickness Haryati Yaacob, Mohd Rosli Hainin, Fung, Lung Chang Investigation on the performance of bond strength between pavement layers has gain serious attention from researchers worldwide. Typical method to prepare the double layered testing specimen at laboratory scale is to follow the Marshall procedure or to perform coring on constructed field scale test lanes. For specimen prepared with Marshall procedure, binder course loose mix is compacted at double faces first prior to the application of wearing course loose mix in the compaction mould and perform the compaction of the loose wearing course later. This paper focused on the specimen prepared using Marshall procedure where the upper wearing course is subjected to single face compaction. The feasibility of single face compaction is investigated and the relevant amount of compaction blows is determined to achieve sufficient thickness and degree of compaction. Aggregate is proportioned to achieve a target thickness of 35, 50 and 65mm, at an allowable limit of ±1 mm. For the tested mix incorporating dense graded, open graded and gap graded mix, each mix managed to achieve the required degree of compaction at satisfactory thickness with respective compaction blows. Universiti Kebangsaan Malaysia 2014-02 Article PeerReviewed application/pdf en http://journalarticle.ukm.my/6861/1/19_Haryati_Yaacob.pdf Haryati Yaacob, and Mohd Rosli Hainin, and Fung, Lung Chang (2014) Single face compaction on laboratory marshall specimen towards satisfactory degree of compaction and thickness. Sains Malaysiana, 43 (2). pp. 295-302. ISSN 0126-6039 http://www.ukm.my/jsm
repository_type	Digital Repository
institution_category	Local University
institution	Universiti Kebangasaan Malaysia
building	UKM Institutional Repository
collection	Online Access
language	English
description	Investigation on the performance of bond strength between pavement layers has gain serious attention from researchers worldwide. Typical method to prepare the double layered testing specimen at laboratory scale is to follow the Marshall procedure or to perform coring on constructed field scale test lanes. For specimen prepared with Marshall procedure, binder course loose mix is compacted at double faces first prior to the application of wearing course loose mix in the compaction mould and perform the compaction of the loose wearing course later. This paper focused on the specimen prepared using Marshall procedure where the upper wearing course is subjected to single face compaction. The feasibility of single face compaction is investigated and the relevant amount of compaction blows is determined to achieve sufficient thickness and degree of compaction. Aggregate is proportioned to achieve a target thickness of 35, 50 and 65mm, at an allowable limit of ±1 mm. For the tested mix incorporating dense graded, open graded and gap graded mix, each mix managed to achieve the required degree of compaction at satisfactory thickness with respective compaction blows.
format	Article
author	Haryati Yaacob, Mohd Rosli Hainin, Fung, Lung Chang
spellingShingle	Haryati Yaacob, Mohd Rosli Hainin, Fung, Lung Chang Single face compaction on laboratory marshall specimen towards satisfactory degree of compaction and thickness
author_facet	Haryati Yaacob, Mohd Rosli Hainin, Fung, Lung Chang
author_sort	Haryati Yaacob,
title	Single face compaction on laboratory marshall specimen towards satisfactory degree of compaction and thickness
title_short	Single face compaction on laboratory marshall specimen towards satisfactory degree of compaction and thickness
title_full	Single face compaction on laboratory marshall specimen towards satisfactory degree of compaction and thickness
title_fullStr	Single face compaction on laboratory marshall specimen towards satisfactory degree of compaction and thickness
title_full_unstemmed	Single face compaction on laboratory marshall specimen towards satisfactory degree of compaction and thickness
title_sort	single face compaction on laboratory marshall specimen towards satisfactory degree of compaction and thickness
publisher	Universiti Kebangsaan Malaysia
publishDate	2014
url	http://journalarticle.ukm.my/6861/ http://journalarticle.ukm.my/6861/ http://journalarticle.ukm.my/6861/1/19_Haryati_Yaacob.pdf
first_indexed	2023-09-18T19:48:04Z
last_indexed	2023-09-18T19:48:04Z
_version_	1777406033817239552

Single face compaction on laboratory marshall specimen towards satisfactory degree of compaction and thickness

Similar Items