Effect of solidification time to the wall thickness created on the slush casting product

Casting is most often used for making complex shapes that would be otherwise difficult or uneconomical to make by other methods is a manufacturing process by which a liquid material is usually poured into a mold, which contains a hollow cavity of the desired shape, and then allowed to solidify. Afte...

Full description

Bibliographic Details
Main Author:	Tengku Ahmad Firdaus, Tengku Zainal
Format:	Undergraduates Project Papers
Language:	English
Published:	2009
Subjects:	TP Chemical technology
Online Access:	http://umpir.ump.edu.my/id/eprint/1134/ http://umpir.ump.edu.my/id/eprint/1134/ http://umpir.ump.edu.my/id/eprint/1134/1/Tengku_Ahmad_Firdaus_Tengku_Zainal.pdf

id	ump-1134
recordtype	eprints
spelling	ump-11342015-03-03T07:48:57Z http://umpir.ump.edu.my/id/eprint/1134/ Effect of solidification time to the wall thickness created on the slush casting product Tengku Ahmad Firdaus, Tengku Zainal TP Chemical technology Casting is most often used for making complex shapes that would be otherwise difficult or uneconomical to make by other methods is a manufacturing process by which a liquid material is usually poured into a mold, which contains a hollow cavity of the desired shape, and then allowed to solidify. After a certain time, the excess liquid will poured out, and then the solid casting is then ejected or broken out to complete the process. Casting may be used to form various materials that cold set after mixing of components (such as epoxies, concrete, plaster and clay Therefore, this study is conducted to fabricate the tool holder by using rubberwood as the material for the pattern, RTV-2 silicone rubber for the mould and polyester resin for product. The main objective of this study is to to study the effect of solidification time to the wall thickness created on the slush casting product to suit the function of product and find the optimum solidification time to achieve desire wall thickness for particular slush casting product. The study parameters are based on slush casting solidification time, which are 1, 2, 3, 4 and 5 minutes. The study output is wall thickness and digital vernier caliper is used to measure the dimension of wall thickness. Based on the measurement, only product have the value factor of safety (FOS) more than one, >1 is selected as a product. Based on the study analysis, it is discovered that the highest solidification time produce the highest wall thickness created on the product. 2009-11 Undergraduates Project Papers NonPeerReviewed application/pdf en http://umpir.ump.edu.my/id/eprint/1134/1/Tengku_Ahmad_Firdaus_Tengku_Zainal.pdf Tengku Ahmad Firdaus, Tengku Zainal (2009) Effect of solidification time to the wall thickness created on the slush casting product. Faculty of Mechanical Engineering, Universiti Malaysia Pahang. http://iportal.ump.edu.my/lib/item?id=chamo:46526&theme=UMP2
repository_type	Digital Repository
institution_category	Local University
institution	Universiti Malaysia Pahang
building	UMP Institutional Repository
collection	Online Access
language	English
topic	TP Chemical technology
spellingShingle	TP Chemical technology Tengku Ahmad Firdaus, Tengku Zainal Effect of solidification time to the wall thickness created on the slush casting product
description	Casting is most often used for making complex shapes that would be otherwise difficult or uneconomical to make by other methods is a manufacturing process by which a liquid material is usually poured into a mold, which contains a hollow cavity of the desired shape, and then allowed to solidify. After a certain time, the excess liquid will poured out, and then the solid casting is then ejected or broken out to complete the process. Casting may be used to form various materials that cold set after mixing of components (such as epoxies, concrete, plaster and clay Therefore, this study is conducted to fabricate the tool holder by using rubberwood as the material for the pattern, RTV-2 silicone rubber for the mould and polyester resin for product. The main objective of this study is to to study the effect of solidification time to the wall thickness created on the slush casting product to suit the function of product and find the optimum solidification time to achieve desire wall thickness for particular slush casting product. The study parameters are based on slush casting solidification time, which are 1, 2, 3, 4 and 5 minutes. The study output is wall thickness and digital vernier caliper is used to measure the dimension of wall thickness. Based on the measurement, only product have the value factor of safety (FOS) more than one, >1 is selected as a product. Based on the study analysis, it is discovered that the highest solidification time produce the highest wall thickness created on the product.
format	Undergraduates Project Papers
author	Tengku Ahmad Firdaus, Tengku Zainal
author_facet	Tengku Ahmad Firdaus, Tengku Zainal
author_sort	Tengku Ahmad Firdaus, Tengku Zainal
title	Effect of solidification time to the wall thickness created on the slush casting product
title_short	Effect of solidification time to the wall thickness created on the slush casting product
title_full	Effect of solidification time to the wall thickness created on the slush casting product
title_fullStr	Effect of solidification time to the wall thickness created on the slush casting product
title_full_unstemmed	Effect of solidification time to the wall thickness created on the slush casting product
title_sort	effect of solidification time to the wall thickness created on the slush casting product
publishDate	2009
url	http://umpir.ump.edu.my/id/eprint/1134/ http://umpir.ump.edu.my/id/eprint/1134/ http://umpir.ump.edu.my/id/eprint/1134/1/Tengku_Ahmad_Firdaus_Tengku_Zainal.pdf
first_indexed	2023-09-18T21:54:01Z
last_indexed	2023-09-18T21:54:01Z
_version_	1777413957885100032

Effect of solidification time to the wall thickness created on the slush casting product

Similar Items