Design and development of andon system for machining machine at FKP lab
Andon system is a visual and audible response notification tool and widely used in manufacturing industry. From this concept, one project is conducted to develop an andon system to monitor the status of machine in Faculty of Manufacturing Engineering (FKP) laboratory. This system used indicator ligh...
| Main Author: | |
|---|---|
| Format: | Undergraduates Project Papers |
| Language: | English |
| Published: |
2013
|
| Subjects: | |
| Online Access: | http://umpir.ump.edu.my/id/eprint/11544/ http://umpir.ump.edu.my/id/eprint/11544/ http://umpir.ump.edu.my/id/eprint/11544/1/FKP%20-%20SITI%20ZURAIDA%20ISMAIL%20%28CD7781%29.pdf |
| Summary: | Andon system is a visual and audible response notification tool and widely used in manufacturing industry. From this concept, one project is conducted to develop an andon system to monitor the status of machine in Faculty of Manufacturing Engineering (FKP) laboratory. This system used indicator lights (green, red and yellow color) and the light was control by using wireless connection. The aims of this project is to design and develop an andon system for better visual management at FKP laboratory. There are three phases in this system. Phase I cover the design of the transmitter board and receiver board. Phase II is the programming installation into the PIC16F88 microcontroller. The programming are build using Proton IDE software. Phase III is the fabrication of the andon system. To validate the system, the light was observed and the results shows this system work efficiency. Green lights show the machine in operation condition, yellow lights for idle condition and red lights when then machine stop the operation. Efficiency test are conduct to evaluate the application's efficiency with the computing environment. hundred test has been run and the results show efficiency is in range of 90% to 100%. From the results it shows that this system run well and provide a consistent applicat ion and hardware environments to application developer. By implementing this system at FKP laboratory, it will help students to identify the condition of the machine. |
|---|