Temperature Analysis When Using Ethylene-Glycol-Based TiO2 as a New Coolant for Milling

This paper presents the effects of various milling conditions on the tool wear and workpiece temperature when using ethylene-glycol-based TiO2 nanofluid as the coolant for stainless steel AISI 304. A TiN coated carbide insert is used as the milling tool. A thermocouple was embedded into the workpiec...

Full description

Bibliographic Details
Main Authors:	M., Yogeswaran, K., Kadirgama, M. M., Rahman, D., Ramasamy
Format:	Article
Language:	English
Published:	Universiti Malaysia Pahang 2015
Subjects:	TJ Mechanical engineering and machinery
Online Access:	http://umpir.ump.edu.my/id/eprint/11649/ http://umpir.ump.edu.my/id/eprint/11649/ http://umpir.ump.edu.my/id/eprint/11649/ http://umpir.ump.edu.my/id/eprint/11649/1/fkm-2015-Yogeswaran-temperature%20analysis.pdf

id	ump-11649
recordtype	eprints
spelling	ump-116492018-07-27T03:19:57Z http://umpir.ump.edu.my/id/eprint/11649/ Temperature Analysis When Using Ethylene-Glycol-Based TiO2 as a New Coolant for Milling M., Yogeswaran K., Kadirgama M. M., Rahman D., Ramasamy TJ Mechanical engineering and machinery This paper presents the effects of various milling conditions on the tool wear and workpiece temperature when using ethylene-glycol-based TiO2 nanofluid as the coolant for stainless steel AISI 304. A TiN coated carbide insert is used as the milling tool. A thermocouple was embedded into the workpiece to record the workpiece temperature during the end-milling process. It can be clearly seen that the temperature keeps on increasing after each experimental pass for three sets of experiments. The experiment conducted using the ethylene-glycol-based TiO2 nanocoolant exhibits a much lower workpiece temperature compared to the experiment conducted using a normal commercial coolant. Milling with the ethylene-glycol-based TiO2 nanocoolant reduced the wear on the edge of the insert compared to the normal commercial coolant. In conclusion, end-milling stainless steel AISI 304 using a TiN coated carbide insert and an ethylene-glycol-based TiO2 nanocoolant exhibits superior results with regard to workpiece temperature and tool wear. The temperature was reduced by 30 percent when using the nanofluid. Universiti Malaysia Pahang 2015-06-30 Article PeerReviewed application/pdf en http://umpir.ump.edu.my/id/eprint/11649/1/fkm-2015-Yogeswaran-temperature%20analysis.pdf M., Yogeswaran and K., Kadirgama and M. M., Rahman and D., Ramasamy (2015) Temperature Analysis When Using Ethylene-Glycol-Based TiO2 as a New Coolant for Milling. International Journal of Automotive and Mechanical Engineering (IJAME), 11. pp. 2272-2281. ISSN 2229-8649 (Print); 2180-1606 (Online) http://dx.doi.org/10.15282/ijame.11.2015.10.0191 DOI: 10.15282/ijame.11.2015.10.0191
repository_type	Digital Repository
institution_category	Local University
institution	Universiti Malaysia Pahang
building	UMP Institutional Repository
collection	Online Access
language	English
topic	TJ Mechanical engineering and machinery
spellingShingle	TJ Mechanical engineering and machinery M., Yogeswaran K., Kadirgama M. M., Rahman D., Ramasamy Temperature Analysis When Using Ethylene-Glycol-Based TiO2 as a New Coolant for Milling
description	This paper presents the effects of various milling conditions on the tool wear and workpiece temperature when using ethylene-glycol-based TiO2 nanofluid as the coolant for stainless steel AISI 304. A TiN coated carbide insert is used as the milling tool. A thermocouple was embedded into the workpiece to record the workpiece temperature during the end-milling process. It can be clearly seen that the temperature keeps on increasing after each experimental pass for three sets of experiments. The experiment conducted using the ethylene-glycol-based TiO2 nanocoolant exhibits a much lower workpiece temperature compared to the experiment conducted using a normal commercial coolant. Milling with the ethylene-glycol-based TiO2 nanocoolant reduced the wear on the edge of the insert compared to the normal commercial coolant. In conclusion, end-milling stainless steel AISI 304 using a TiN coated carbide insert and an ethylene-glycol-based TiO2 nanocoolant exhibits superior results with regard to workpiece temperature and tool wear. The temperature was reduced by 30 percent when using the nanofluid.
format	Article
author	M., Yogeswaran K., Kadirgama M. M., Rahman D., Ramasamy
author_facet	M., Yogeswaran K., Kadirgama M. M., Rahman D., Ramasamy
author_sort	M., Yogeswaran
title	Temperature Analysis When Using Ethylene-Glycol-Based TiO2 as a New Coolant for Milling
title_short	Temperature Analysis When Using Ethylene-Glycol-Based TiO2 as a New Coolant for Milling
title_full	Temperature Analysis When Using Ethylene-Glycol-Based TiO2 as a New Coolant for Milling
title_fullStr	Temperature Analysis When Using Ethylene-Glycol-Based TiO2 as a New Coolant for Milling
title_full_unstemmed	Temperature Analysis When Using Ethylene-Glycol-Based TiO2 as a New Coolant for Milling
title_sort	temperature analysis when using ethylene-glycol-based tio2 as a new coolant for milling
publisher	Universiti Malaysia Pahang
publishDate	2015
url	http://umpir.ump.edu.my/id/eprint/11649/ http://umpir.ump.edu.my/id/eprint/11649/ http://umpir.ump.edu.my/id/eprint/11649/ http://umpir.ump.edu.my/id/eprint/11649/1/fkm-2015-Yogeswaran-temperature%20analysis.pdf
first_indexed	2023-09-18T22:12:35Z
last_indexed	2023-09-18T22:12:35Z
_version_	1777415125880274944

Temperature Analysis When Using Ethylene-Glycol-Based TiO2 as a New Coolant for Milling

Similar Items