Characterization of Sewage Sludge Ash (SSA) in Cement Mortar
Sewage sludge Ash (SSA) is a waste material obtained from the incineration of waste water sludge. The SSA generated from the burning usually is disposed of to the landfill which is not the final solution. Hence an investigation was carried out to study the potential use of SSA in cement base materia...
Main Authors: | , , , , |
---|---|
Format: | Article |
Language: | English English |
Published: |
Asian Research Publishing Network (ARPN)
2016
|
Subjects: | |
Online Access: | http://umpir.ump.edu.my/id/eprint/12006/ http://umpir.ump.edu.my/id/eprint/12006/ http://umpir.ump.edu.my/id/eprint/12006/1/fluidsche%2520abstract.pdf http://umpir.ump.edu.my/id/eprint/12006/6/fkasa-2016-siewchoo-characterization%20of%20sewage-full.pdf |
id |
ump-12006 |
---|---|
recordtype |
eprints |
spelling |
ump-120062018-02-05T02:30:15Z http://umpir.ump.edu.my/id/eprint/12006/ Characterization of Sewage Sludge Ash (SSA) in Cement Mortar Chin, Siew Choo Doh, Shu Ing Kusbiantoro, Andri Yih, Kang Wong Saffuan, Wan Ahmad T Technology (General) TA Engineering (General). Civil engineering (General) Sewage sludge Ash (SSA) is a waste material obtained from the incineration of waste water sludge. The SSA generated from the burning usually is disposed of to the landfill which is not the final solution. Hence an investigation was carried out to study the potential use of SSA in cement base material. The chemical mineralogical characteristic of SSA in cement mortar were examined. The percentage of SSA considered in this study was 10% replacement of the mass of cement whereas the incineration temperatures investigated was at 600° and 800°C. The test conducted in this study including X-ray Diffraction (XRD), X-ray Fluorescence (XRF) and Filed Emission Scanning Electronic Microscope (FESEM) and compressive strength test. Result show significant amount of SiO², Al²O³ and CaO was traced after the incineration process. Mortar sample with 10% replacement of 800°C burnt SSA improves the compressive strength up to 1.14% and 5.06% at the ages of 28 and 98 days, respectively. The FESEM test result show that SSA samples in 600°C exhibited needle-shape particles and a smooth structure in 800°C due to pozzolanic activity which filled the void and pores in the mortar. The bonding also provides additional strength to the mortar in which the compressive strength has increased after 28 days and 90 days Asian Research Publishing Network (ARPN) 2016 Article PeerReviewed application/pdf en http://umpir.ump.edu.my/id/eprint/12006/1/fluidsche%2520abstract.pdf application/pdf en http://umpir.ump.edu.my/id/eprint/12006/6/fkasa-2016-siewchoo-characterization%20of%20sewage-full.pdf Chin, Siew Choo and Doh, Shu Ing and Kusbiantoro, Andri and Yih, Kang Wong and Saffuan, Wan Ahmad (2016) Characterization of Sewage Sludge Ash (SSA) in Cement Mortar. Journal of Engineering and Applied Sciences, 11 (4). pp. 2242-2247. ISSN 1819-6608 http://www.arpnjournals.org/jeas/research_papers/rp_2016/jeas_0216_3633.pdf |
repository_type |
Digital Repository |
institution_category |
Local University |
institution |
Universiti Malaysia Pahang |
building |
UMP Institutional Repository |
collection |
Online Access |
language |
English English |
topic |
T Technology (General) TA Engineering (General). Civil engineering (General) |
spellingShingle |
T Technology (General) TA Engineering (General). Civil engineering (General) Chin, Siew Choo Doh, Shu Ing Kusbiantoro, Andri Yih, Kang Wong Saffuan, Wan Ahmad Characterization of Sewage Sludge Ash (SSA) in Cement Mortar |
description |
Sewage sludge Ash (SSA) is a waste material obtained from the incineration of waste water sludge. The SSA generated from the burning usually is disposed of to the landfill which is not the final solution. Hence an investigation was carried out to study the potential use of SSA in cement base material. The chemical mineralogical characteristic of SSA in cement mortar were examined. The percentage of SSA considered in this study was 10% replacement of the mass of cement whereas the incineration temperatures investigated was at 600° and 800°C. The test conducted in this study including X-ray Diffraction (XRD), X-ray Fluorescence (XRF) and Filed Emission Scanning Electronic Microscope (FESEM) and compressive strength test. Result show significant amount of SiO², Al²O³ and CaO was traced after the incineration process. Mortar sample with 10% replacement of 800°C burnt SSA improves the compressive strength up to 1.14% and 5.06% at the ages of 28 and 98 days, respectively. The FESEM test result show that SSA samples in 600°C exhibited needle-shape particles and a smooth structure in 800°C due to pozzolanic activity which filled the void and pores in the mortar. The bonding also provides additional strength to the mortar in which the compressive strength has increased after 28 days and 90 days |
format |
Article |
author |
Chin, Siew Choo Doh, Shu Ing Kusbiantoro, Andri Yih, Kang Wong Saffuan, Wan Ahmad |
author_facet |
Chin, Siew Choo Doh, Shu Ing Kusbiantoro, Andri Yih, Kang Wong Saffuan, Wan Ahmad |
author_sort |
Chin, Siew Choo |
title |
Characterization of Sewage Sludge Ash (SSA) in Cement Mortar |
title_short |
Characterization of Sewage Sludge Ash (SSA) in Cement Mortar |
title_full |
Characterization of Sewage Sludge Ash (SSA) in Cement Mortar |
title_fullStr |
Characterization of Sewage Sludge Ash (SSA) in Cement Mortar |
title_full_unstemmed |
Characterization of Sewage Sludge Ash (SSA) in Cement Mortar |
title_sort |
characterization of sewage sludge ash (ssa) in cement mortar |
publisher |
Asian Research Publishing Network (ARPN) |
publishDate |
2016 |
url |
http://umpir.ump.edu.my/id/eprint/12006/ http://umpir.ump.edu.my/id/eprint/12006/ http://umpir.ump.edu.my/id/eprint/12006/1/fluidsche%2520abstract.pdf http://umpir.ump.edu.my/id/eprint/12006/6/fkasa-2016-siewchoo-characterization%20of%20sewage-full.pdf |
first_indexed |
2023-09-18T22:13:09Z |
last_indexed |
2023-09-18T22:13:09Z |
_version_ |
1777415162298368000 |