Investigation of micromachining of silicon using micro-EDM = penyelidikan dalam pemesinan mikro bagi silicon menggunakan EDM mikro

Investigation of micromachining of silicon using micro-EDM = penyelidikan dalam pemesinan mikro bagi silicon menggunakan EDM mikro

This project aims in revealing the optimum results for micromachining of silicon and copper using Micro electric discharge machining (EDM) process with new advanced technology achieved which is implemented piezoactuator as the tool feed mechanism. Although Micro EDM usage is essential in manufacturi...

Full description

Bibliographic Details
Main Authors:	Mahendran, Samykano, T., Nagarajan, Dr., Majdi, D., Ramasamy, K., Kadirgama, M. M., Noor, Lee, Giok Chui, Mohd Fazli, Ismail
Format:	Thesis
Language:	English
Published:	2011
Subjects:	TJ Mechanical engineering and machinery
Online Access:	http://umpir.ump.edu.my/id/eprint/12108/ http://umpir.ump.edu.my/id/eprint/12108/ http://umpir.ump.edu.my/id/eprint/12108/1/MAHENDRAN%20AL%20SAMYKANO.PDF

Similar Items

Development of micro-EDM with microactuator feed control system = membangunkan EDM mikro menggunakan aktuator mikro sebagai sistem penyuapan pemotongan
by: Mahendran, Samykano, et al.
Published: (2011)

Development of micropump in fuel cell application using micro electro-mechanical system (MEMS) machining method = membangunkan pam mikro untuk penggunaan sel bahan api menggunakan sistem mikro elektro-mechanical (MEMS)
by: D., Ramasamy, et al.
Published: (2010)

Prinsip pengajaran mikro
by: Omardin Ashaari
Published: (1997)

Experimental micromachining of silicon with Nd-YAG laser
by: Mon, Thet Thet, et al.
Published: (2011)

Micro-Edm:Overview And Recent Developments
by: Mahendran, Samykano
Published: (2010)

Thermal response of silicon during virtual laser micromachining
by: Muhammad Hasri, Ibrahim
Published: (2009)

Finite Element Prediction of Heat-Affected Zone in Laser-micromachining of Silicon
by: T. T., Mon, et al.
Published: (2008)

Kemahiran asas pengajaran melalui pengajaran mikro
by: RUDIN Salinger
Published: (1990)

Pengurusan kredit mikro di kalangan wanita
by: Zaimah Ramli,
Published: (2010)

Improvement of surface quality using silicon carbide powder added dielectric fluid during EDM
by: Khan, Ahsan Ali, et al.
Published: (2017)

Fabrication of micromachined uniform microtrench arrays for silicon based filtration membrane
by: Kamarul 'Asyikin Mustafa,, et al.
Published: (2019)

Experimental study on improving μ- WEDM and μ-EDM of doped silicon by temporary metallic coating
by: Saleh, Tanveer, et al.
Published: (2015)

Effect of conventional EDM parameters on micromachined surface roughness and fabrication of hot embossing master and microtool
by: Ali, Mohammad Yeakub, et al.
Published: (2009)

Development of micro EDM with directly mounted APA 400MML actuator
by: Samykano, Mahendran, et al.
Published: (2011)

Algoritma cerdik untuk pengesan kelembapan berasaskan mikro pengawal
by: Mohd. Nazaruddin bin Mohd Nazir
Published: (1994)

Litar penuai tenaga hibrid mikro untuk aplikasi bioperubatan
by: Jahariah Sampe,, et al.
Published: (2017)

Silicon
by: Thomas
Published: (2003)

Siri sistem fakta peperiksaan STPM ekonomi mikro dan makro
by: Yap
Published: (1987)

Kepentingan integrasi zakat dan kewangan mikro Islam terhadap keusahawanan sosial
by: Hamdan, Hamdino, et al.
Published: (2014)

Recent developments in EDM
by: Ishak, Norazah, et al.
Published: (2011)

Kesan penuaan sesuhu terhadap sifat mikro kekerasan pempaterian Sn-Ag-Cu/CNT/Cu menggunakan pelekukan nano
by: Norliza Ismail,, et al.
Published: (2019)

Cerpen mikro: wacana kreatif dalam P&P pembangunan belia (SKPM 2023)
by: Jamiah Manap,, et al.
Published: (2017)

Developments in EDM process variables
by: Khan, Ahsan Ali, et al.
Published: (2011)

Impak kredit mikro ke atas ketaksamarataan pendapatan di kalangan sahabat amanah ikhtiar
by: Mohd Saifoul Zamzuri Noor,, et al.
Published: (2013)

Micromachining
by: Ali, Mohammad Yeakub, et al.
Published: (2016)

An introduction to electrical discharge machining (EDM)
by: Khan, Ahsan Ali, et al.
Published: (2011)

ELID grinding and EDM for finish machining
by: Saleh, Tanveer, et al.
Published: (2017)

Enhancement of the production yield of fluorescent silicon nanostructures using silicon-based salts
by: Laila H. Abuhassan,
Published: (2010)

Optimization of EDM parameters for micro/meso fabrication
by: Ali, Mohammad Yeakub, et al.
Published: (2006)

Characterization of silicon nanowire transistor
by: Al Ariqi, Hani Taha, et al.
Published: (2019)

Recent nanofabrication of silicon dioxide on silicon wafer using AFM operated at low temperature
by: Sutjipto, Agus Geter Edy, et al.
Published: (2011)

Effect of silicon on strength and fracture surfaces of aluminium–silicon casting and heat treated alloys
by: Haque, Md. Mohafizul, et al.
Published: (2006)

Study of the effects of EDM parameters on material removal rate , electrode wear rate and surface roughness in the EDM of S-Star
by: Mohamed , Konneh
Published: (2010)

The Silicon Valley Edge a habitat for innovation and entrepreneurship
Published: (2000)

Effect of size and shape of electrodes on the performance of EDM
by: Khan, Ahsan Ali, et al.
Published: (2008)

Cooling effect on electrode and process parameters in EDM
by: Abdulkareem, Suleiman, et al.
Published: (2010)

Geometrical integrity of microholes produced by micro-EDM
by: Ali, Mohammad Yeakub
Published: (2008)

Characterization of ceramic materials after machining by EDM
by: Maleque, Md. Abdul
Published: (2012)

Electrical discharge machining (EDM): A review
by: Banu, Asfana, et al.
Published: (2016)

The implementation of Taguchi method on EDM process of Tungsten Carbide
by: Lajis, Mohd Amri, et al.
Published: (2009)

Cannot write session to /tmp/vufind_sessions/sess_et4bj03tmkf53hftecuo9tk4rs