Design and Analysis of Tooth Impact Test Rig for Spur Gear

This paper is about the design and analysis of a prototype of tooth impact test rig for spur gear. The test rig was fabricated and analysis was conducted to study its' limitation and capabilities. The design of the rig is analysed to ensure that there will be no problem occurring during the tes...

Full description

Bibliographic Details
Main Authors:	Wafiuddin, Md Ghazali, Ismail Ali, Abdul Aziz, Daing Mohamad Nafiz, Daing Idris, Nurazima, Ismail, Azizul Helmi, Sofian
Format:	Conference or Workshop Item
Language:	English
Published:	IOP Publishing 2016
Subjects:	TJ Mechanical engineering and machinery TP Chemical technology
Online Access:	http://umpir.ump.edu.my/id/eprint/13709/ http://umpir.ump.edu.my/id/eprint/13709/ http://umpir.ump.edu.my/id/eprint/13709/ http://umpir.ump.edu.my/id/eprint/13709/1/Design%20and%20Analysis%20of%20Tooth%20Impact%20Test%20Rig%20for%20Spur%20Gear.pdf

id	ump-13709
recordtype	eprints
spelling	ump-137092018-01-19T00:38:29Z http://umpir.ump.edu.my/id/eprint/13709/ Design and Analysis of Tooth Impact Test Rig for Spur Gear Wafiuddin, Md Ghazali Ismail Ali, Abdul Aziz Daing Mohamad Nafiz, Daing Idris Nurazima, Ismail Azizul Helmi, Sofian TJ Mechanical engineering and machinery TP Chemical technology This paper is about the design and analysis of a prototype of tooth impact test rig for spur gear. The test rig was fabricated and analysis was conducted to study its' limitation and capabilities. The design of the rig is analysed to ensure that there will be no problem occurring during the test and reliable data can be obtained. From the result of the analysis, the maximum amount of load that can be applied, the factor of safety of the machine, the stresses on the test rig parts were determined. This is important in the design consideration of the test rig. The materials used for the fabrication of the test rig were also discussed and analysed. MSC Nastran Patran software was used to analyse the model, which was designed by using SolidWorks 2014 software. Based from the results, there were limitations found from the initial design and the test rig design needs to be improved in order for the test rig to operate properly. IOP Publishing 2016 Conference or Workshop Item PeerReviewed application/pdf en cc_by http://umpir.ump.edu.my/id/eprint/13709/1/Design%20and%20Analysis%20of%20Tooth%20Impact%20Test%20Rig%20for%20Spur%20Gear.pdf Wafiuddin, Md Ghazali and Ismail Ali, Abdul Aziz and Daing Mohamad Nafiz, Daing Idris and Nurazima, Ismail and Azizul Helmi, Sofian (2016) Design and Analysis of Tooth Impact Test Rig for Spur Gear. In: IOP Conference Series: Materials Science and Engineering: 2nd International Manufacturing Engineering Conference and 3rd Asia-Pacific Conference on Manufacturing Systems (iMEC-APCOMS 2015), 12–14 November 2015 , Kuala Lumpur, Malaysia. pp. 1-12., 114 (1). ISSN 1757-8981 (Print), 1757-899X (Online) http://dx.doi.org/10.1088/1757-899X/114/1/012058 DOI: 10.1088/1757-899X/114/1/012058
repository_type	Digital Repository
institution_category	Local University
institution	Universiti Malaysia Pahang
building	UMP Institutional Repository
collection	Online Access
language	English
topic	TJ Mechanical engineering and machinery TP Chemical technology
spellingShingle	TJ Mechanical engineering and machinery TP Chemical technology Wafiuddin, Md Ghazali Ismail Ali, Abdul Aziz Daing Mohamad Nafiz, Daing Idris Nurazima, Ismail Azizul Helmi, Sofian Design and Analysis of Tooth Impact Test Rig for Spur Gear
description	This paper is about the design and analysis of a prototype of tooth impact test rig for spur gear. The test rig was fabricated and analysis was conducted to study its' limitation and capabilities. The design of the rig is analysed to ensure that there will be no problem occurring during the test and reliable data can be obtained. From the result of the analysis, the maximum amount of load that can be applied, the factor of safety of the machine, the stresses on the test rig parts were determined. This is important in the design consideration of the test rig. The materials used for the fabrication of the test rig were also discussed and analysed. MSC Nastran Patran software was used to analyse the model, which was designed by using SolidWorks 2014 software. Based from the results, there were limitations found from the initial design and the test rig design needs to be improved in order for the test rig to operate properly.
format	Conference or Workshop Item
author	Wafiuddin, Md Ghazali Ismail Ali, Abdul Aziz Daing Mohamad Nafiz, Daing Idris Nurazima, Ismail Azizul Helmi, Sofian
author_facet	Wafiuddin, Md Ghazali Ismail Ali, Abdul Aziz Daing Mohamad Nafiz, Daing Idris Nurazima, Ismail Azizul Helmi, Sofian
author_sort	Wafiuddin, Md Ghazali
title	Design and Analysis of Tooth Impact Test Rig for Spur Gear
title_short	Design and Analysis of Tooth Impact Test Rig for Spur Gear
title_full	Design and Analysis of Tooth Impact Test Rig for Spur Gear
title_fullStr	Design and Analysis of Tooth Impact Test Rig for Spur Gear
title_full_unstemmed	Design and Analysis of Tooth Impact Test Rig for Spur Gear
title_sort	design and analysis of tooth impact test rig for spur gear
publisher	IOP Publishing
publishDate	2016
url	http://umpir.ump.edu.my/id/eprint/13709/ http://umpir.ump.edu.my/id/eprint/13709/ http://umpir.ump.edu.my/id/eprint/13709/ http://umpir.ump.edu.my/id/eprint/13709/1/Design%20and%20Analysis%20of%20Tooth%20Impact%20Test%20Rig%20for%20Spur%20Gear.pdf
first_indexed	2023-09-18T22:16:38Z
last_indexed	2023-09-18T22:16:38Z
_version_	1777415380672708608

Design and Analysis of Tooth Impact Test Rig for Spur Gear

Similar Items