Fabrication of modal analysis test rig for clamped-clamped boundry condition

The main focus of this project is to design and fabricate a mini modal analysis test rig for clamped-clamped boundary condition. The design generation of this project and solid three dimensional structures modelling of the test rig was developed using solidworks software. This test rig was made usin...

Full description

Bibliographic Details
Main Author: Mohd Hafiz, Razilah
Format: Undergraduates Project Papers
Language:English
Published: 2010
Subjects:
Online Access:http://umpir.ump.edu.my/id/eprint/1377/
http://umpir.ump.edu.my/id/eprint/1377/
http://umpir.ump.edu.my/id/eprint/1377/1/mohd_hafiz_razilah_%28_CD_4909%29.pdf
Description
Summary:The main focus of this project is to design and fabricate a mini modal analysis test rig for clamped-clamped boundary condition. The design generation of this project and solid three dimensional structures modelling of the test rig was developed using solidworks software. This test rig was made using iron angle and hollow square bar and went through a few fabricating process such as measuring, cutting, welding and finishing. It was successfully been done and able to support a modal analysis specimen for maximum length of plate is 20cm to 30cm.