Simulation Study of Cutting Tool System Using Intelligent Active Force Control

Simulation Study of Cutting Tool System Using Intelligent Active Force Control

This paper presents a study of vibration control through an active force control (AFC) scheme. AFCs are used widely in dynamic system control and are highly robust control schemes, although under unknown disturbances and operation conditions. In this study, the AFC was incorporated with a convention...

Full description

Bibliographic Details
Main Authors: M. M., Hatifi, M. F., Hassan, A. R., Yusoff
Format: Article
Language:English
Published: Faculty Mechanical Engineering, UMP 2011
Subjects:
TJ Mechanical engineering and machinery
Online Access:http://umpir.ump.edu.my/id/eprint/13798/
http://umpir.ump.edu.my/id/eprint/13798/
http://umpir.ump.edu.my/id/eprint/13798/
http://umpir.ump.edu.my/id/eprint/13798/1/Simulation%20Study%20of%20Cutting%20Tool%20System%20Using%20Intelligent%20Active%20Force%20Control.pdf
id ump-13798
recordtype eprints
spelling ump-137982016-08-03T06:17:42Z http://umpir.ump.edu.my/id/eprint/13798/ Simulation Study of Cutting Tool System Using Intelligent Active Force Control M. M., Hatifi M. F., Hassan A. R., Yusoff TJ Mechanical engineering and machinery This paper presents a study of vibration control through an active force control (AFC) scheme. AFCs are used widely in dynamic system control and are highly robust control schemes, although under unknown disturbances and operation conditions. In this study, the AFC was incorporated with a conventional proportional-integral-derivative (PID) controller to control an active vibration isolation system. A cutting tool of a turning machine with two degrees of freedom is used in this study. A harmonic force due to an unbalanced rotating mass and a sinusoidal response that represented an internal disturbance were applied to both axes (X and Y) of the models, respectively. Generally, the estimated mass (EM) is the most significant parameter in an AFC scheme; thus, the interest in this study was to obtain the EM via a conventional crude approximation method and an intelligent fuzzy logic method. A new AFC scheme with fuzzy logic control (FLC) was proposed (AFCFLC), which is an AFC combined with a PID and FLC. The main purpose of this scheme was to obtain the optimum EM value via the intelligent method and to suppress vibration. Finally, a demonstration of a comparison study between each control scheme was carried out, which revealed clearly that the proposed AFCFLC scheme was the most superior control method for vibration isolation in both axes of the cutting tool models. Faculty Mechanical Engineering, UMP 2011 Article PeerReviewed application/pdf en cc_by http://umpir.ump.edu.my/id/eprint/13798/1/Simulation%20Study%20of%20Cutting%20Tool%20System%20Using%20Intelligent%20Active%20Force%20Control.pdf M. M., Hatifi and M. F., Hassan and A. R., Yusoff (2011) Simulation Study of Cutting Tool System Using Intelligent Active Force Control. Journal of Mechanical Engineering and Sciences (JMES) , 1. pp. 62-74. ISSN 2289-4659 (print); 2231-8380 (online) http://dx.doi.org/10.15282/jmes.1.2011.6.0006 DOI: 10.15282/jmes.1.2011.6.0006
repository_type Digital Repository
institution_category Local University
institution Universiti Malaysia Pahang
building UMP Institutional Repository
collection Online Access
language English
topic TJ Mechanical engineering and machinery
spellingShingle TJ Mechanical engineering and machinery
M. M., Hatifi
M. F., Hassan
A. R., Yusoff
Simulation Study of Cutting Tool System Using Intelligent Active Force Control
description This paper presents a study of vibration control through an active force control (AFC) scheme. AFCs are used widely in dynamic system control and are highly robust control schemes, although under unknown disturbances and operation conditions. In this study, the AFC was incorporated with a conventional proportional-integral-derivative (PID) controller to control an active vibration isolation system. A cutting tool of a turning machine with two degrees of freedom is used in this study. A harmonic force due to an unbalanced rotating mass and a sinusoidal response that represented an internal disturbance were applied to both axes (X and Y) of the models, respectively. Generally, the estimated mass (EM) is the most significant parameter in an AFC scheme; thus, the interest in this study was to obtain the EM via a conventional crude approximation method and an intelligent fuzzy logic method. A new AFC scheme with fuzzy logic control (FLC) was proposed (AFCFLC), which is an AFC combined with a PID and FLC. The main purpose of this scheme was to obtain the optimum EM value via the intelligent method and to suppress vibration. Finally, a demonstration of a comparison study between each control scheme was carried out, which revealed clearly that the proposed AFCFLC scheme was the most superior control method for vibration isolation in both axes of the cutting tool models.
format Article
author M. M., Hatifi
M. F., Hassan
A. R., Yusoff
author_facet M. M., Hatifi
M. F., Hassan
A. R., Yusoff
author_sort M. M., Hatifi
title Simulation Study of Cutting Tool System Using Intelligent Active Force Control
title_short Simulation Study of Cutting Tool System Using Intelligent Active Force Control
title_full Simulation Study of Cutting Tool System Using Intelligent Active Force Control
title_fullStr Simulation Study of Cutting Tool System Using Intelligent Active Force Control
title_full_unstemmed Simulation Study of Cutting Tool System Using Intelligent Active Force Control
title_sort simulation study of cutting tool system using intelligent active force control
publisher Faculty Mechanical Engineering, UMP
publishDate 2011
url http://umpir.ump.edu.my/id/eprint/13798/
http://umpir.ump.edu.my/id/eprint/13798/
http://umpir.ump.edu.my/id/eprint/13798/
http://umpir.ump.edu.my/id/eprint/13798/1/Simulation%20Study%20of%20Cutting%20Tool%20System%20Using%20Intelligent%20Active%20Force%20Control.pdf
first_indexed 2023-09-18T22:16:49Z
last_indexed 2023-09-18T22:16:49Z
_version_ 1777415392473382912

Similar Items