A study on the effect of injection moulding process parameters to the properties of injected parts

Plastic has, quite literally, become the cornerstone of our society. We make so many things from plastic that it is hard to imagine what our lives would be like if it was never invented. The value of parameters should be correct and exact so that the good and quality of product can be produced. The...

Full description

Bibliographic Details
Main Author:	Sharifah Rafidah, Syed Hamid
Format:	Undergraduates Project Papers
Language:	English
Published:	2010
Subjects:	TP Chemical technology
Online Access:	http://umpir.ump.edu.my/id/eprint/1497/ http://umpir.ump.edu.my/id/eprint/1497/ http://umpir.ump.edu.my/id/eprint/1497/1/Sharifah_Rafidah_Syed_Hamid_%28CD_5023%29.pdf

id	ump-1497
recordtype	eprints
spelling	ump-14972015-03-03T07:51:25Z http://umpir.ump.edu.my/id/eprint/1497/ A study on the effect of injection moulding process parameters to the properties of injected parts Sharifah Rafidah, Syed Hamid TP Chemical technology Plastic has, quite literally, become the cornerstone of our society. We make so many things from plastic that it is hard to imagine what our lives would be like if it was never invented. The value of parameters should be correct and exact so that the good and quality of product can be produced. The objective for this project is to study the effects of injection parameters which are temperature, pressure and volume to the mechanical properties of the injected parts. Besides that, it also to determine the optimum amount of pressure, temperature and volume at the injection machine in producing document tray. In order to achieve the objectives, the scopes of studies are performed which is the study will be using a polymer material which is Samsung Starex® SD-0150GP High Impact Grade ABS. Besides that, only pressure, temperature and volume will be varied in this study while other parameter for instant clamping unit is fixed constant. The project can be divided into 4 stages. Firstly, is the preparation of the material. Then, injection moulding machine is used to produce document tray with the parameter that control the process which is temperature (220 oC, 230 oC, 240 oC), pressure (1675 bar, 1700 bar, 1725 bar) and volume (340 cm3, 350 cm3, 360 cm3). There are 27 samples produced by using full factorial method. After the samples are produced, there will be some testing for the samples such as mechanical testing such as tensile test and hardness test and physical testing such as density test. Lastly, analysis to determine the best and high quality of the samples was done. All the data obtained can be analyze and evaluate to produce the best optimum parameter for the injected part produce. As a result, the best injected part produced is sample number 10 which has good properties and optimum parameter is temperature at 230 oC, pressure at 1675 bar and volume at 340 cm3. It gives the low value of mass, low value of density, high of strength-to-weight ratio, high value of maximum strength and high value of hardness. 2010-12 Undergraduates Project Papers NonPeerReviewed application/pdf en http://umpir.ump.edu.my/id/eprint/1497/1/Sharifah_Rafidah_Syed_Hamid_%28CD_5023%29.pdf Sharifah Rafidah, Syed Hamid (2010) A study on the effect of injection moulding process parameters to the properties of injected parts. Faculty of Mechanical Engineering, Universiti Malaysia Pahang. http://iportal.ump.edu.my/lib/item?id=chamo:52461&theme=UMP2
repository_type	Digital Repository
institution_category	Local University
institution	Universiti Malaysia Pahang
building	UMP Institutional Repository
collection	Online Access
language	English
topic	TP Chemical technology
spellingShingle	TP Chemical technology Sharifah Rafidah, Syed Hamid A study on the effect of injection moulding process parameters to the properties of injected parts
description	Plastic has, quite literally, become the cornerstone of our society. We make so many things from plastic that it is hard to imagine what our lives would be like if it was never invented. The value of parameters should be correct and exact so that the good and quality of product can be produced. The objective for this project is to study the effects of injection parameters which are temperature, pressure and volume to the mechanical properties of the injected parts. Besides that, it also to determine the optimum amount of pressure, temperature and volume at the injection machine in producing document tray. In order to achieve the objectives, the scopes of studies are performed which is the study will be using a polymer material which is Samsung Starex® SD-0150GP High Impact Grade ABS. Besides that, only pressure, temperature and volume will be varied in this study while other parameter for instant clamping unit is fixed constant. The project can be divided into 4 stages. Firstly, is the preparation of the material. Then, injection moulding machine is used to produce document tray with the parameter that control the process which is temperature (220 oC, 230 oC, 240 oC), pressure (1675 bar, 1700 bar, 1725 bar) and volume (340 cm3, 350 cm3, 360 cm3). There are 27 samples produced by using full factorial method. After the samples are produced, there will be some testing for the samples such as mechanical testing such as tensile test and hardness test and physical testing such as density test. Lastly, analysis to determine the best and high quality of the samples was done. All the data obtained can be analyze and evaluate to produce the best optimum parameter for the injected part produce. As a result, the best injected part produced is sample number 10 which has good properties and optimum parameter is temperature at 230 oC, pressure at 1675 bar and volume at 340 cm3. It gives the low value of mass, low value of density, high of strength-to-weight ratio, high value of maximum strength and high value of hardness.
format	Undergraduates Project Papers
author	Sharifah Rafidah, Syed Hamid
author_facet	Sharifah Rafidah, Syed Hamid
author_sort	Sharifah Rafidah, Syed Hamid
title	A study on the effect of injection moulding process parameters to the properties of injected parts
title_short	A study on the effect of injection moulding process parameters to the properties of injected parts
title_full	A study on the effect of injection moulding process parameters to the properties of injected parts
title_fullStr	A study on the effect of injection moulding process parameters to the properties of injected parts
title_full_unstemmed	A study on the effect of injection moulding process parameters to the properties of injected parts
title_sort	study on the effect of injection moulding process parameters to the properties of injected parts
publishDate	2010
url	http://umpir.ump.edu.my/id/eprint/1497/ http://umpir.ump.edu.my/id/eprint/1497/ http://umpir.ump.edu.my/id/eprint/1497/1/Sharifah_Rafidah_Syed_Hamid_%28CD_5023%29.pdf
first_indexed	2023-09-18T21:54:40Z
last_indexed	2023-09-18T21:54:40Z
_version_	1777413999552364544

A study on the effect of injection moulding process parameters to the properties of injected parts

Similar Items