Design of thermoforming process for PETG part
This project focuses on the drape forming process. The process involves draping a hot plastic sheet over a mold of the desired shape and allows the plastic to cool and harden to take shape. Aluminum of mold had been designed by using computer-aided design and simulated in CATIA V5R21 software. Venti...
| id |
ump-16230 |
|---|---|
| recordtype |
eprints |
| spelling |
ump-162302017-01-20T08:01:25Z http://umpir.ump.edu.my/id/eprint/16230/ Design of thermoforming process for PETG part Nur Anis Arina, Mokhzan Q Science (General) TS Manufactures This project focuses on the drape forming process. The process involves draping a hot plastic sheet over a mold of the desired shape and allows the plastic to cool and harden to take shape. Aluminum of mold had been designed by using computer-aided design and simulated in CATIA V5R21 software. Venting line act as an air flow during thermoforming process and it was applied in this experiment. There were two types of mold had been machined which truncated semi-hemisphere mold with rectangular pocket (TSMRP) and circle pocket (TSMCP). CNC Milling Machine and EDM Wire cut were used to machined the thermoforming mold. Both of them had tested with PETG plastic sheet by using drape forming machine with constant temperature 180oC and pressure 20kpa. The data of thickness after forming process proved that the first touched of plastic sheet to the mold was produced the highest thickness while final touched had produced lowest thickness. Beside that, the when the area of deformation plastic sheet was higher, the thickness was lower. 2016-06 Undergraduates Project Papers NonPeerReviewed application/pdf en http://umpir.ump.edu.my/id/eprint/16230/1/Design%20of%20thermoforming%20process%20for%20PETG%20part-Table%20of%20contents-FKP-Nur%20Anis%20Arina%20Mokhzan-CD%2010435.pdf application/pdf en http://umpir.ump.edu.my/id/eprint/16230/7/Design%20of%20thermoforming%20process%20for%20PETG%20part-Abstract-FKP-Nur%20Anis%20Arina%20Mokhzan-CD%2010435.pdf application/pdf en http://umpir.ump.edu.my/id/eprint/16230/8/Design%20of%20thermoforming%20process%20for%20PETG%20part-Chapter%201-FKP-Nur%20Anis%20Arina%20Mokhzan-CD%2010435.pdf application/pdf en http://umpir.ump.edu.my/id/eprint/16230/9/Design%20of%20thermoforming%20process%20for%20PETG%20part-References-FKP-Nur%20Anis%20Arina%20Mokhzan-CD%2010435.pdf Nur Anis Arina, Mokhzan (2016) Design of thermoforming process for PETG part. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang. http://iportal.ump.edu.my/lib/item?id=chamo:98424&theme=UMP2 |
| repository_type |
Digital Repository |
| institution_category |
Local University |
| institution |
Universiti Malaysia Pahang |
| building |
UMP Institutional Repository |
| collection |
Online Access |
| language |
English English English English |
| topic |
Q Science (General) TS Manufactures |
| spellingShingle |
Q Science (General) TS Manufactures Nur Anis Arina, Mokhzan Design of thermoforming process for PETG part |
| description |
This project focuses on the drape forming process. The process involves draping a hot plastic sheet over a mold of the desired shape and allows the plastic to cool and harden to take shape. Aluminum of mold had been designed by using computer-aided design and simulated in CATIA V5R21 software. Venting line act as an air flow during thermoforming process and it was applied in this experiment. There were two types of mold had been machined which truncated semi-hemisphere mold with rectangular pocket (TSMRP) and circle pocket (TSMCP). CNC Milling Machine and EDM Wire cut were used to machined the thermoforming mold. Both of them had tested with PETG plastic sheet by using drape forming machine with constant temperature 180oC and pressure 20kpa. The data of thickness after forming process proved that the first touched of plastic sheet to the mold was produced the highest thickness while final touched had produced lowest thickness. Beside that, the when the area of deformation plastic sheet was higher, the thickness was lower. |
| format |
Undergraduates Project Papers |
| author |
Nur Anis Arina, Mokhzan |
| author_facet |
Nur Anis Arina, Mokhzan |
| author_sort |
Nur Anis Arina, Mokhzan |
| title |
Design of thermoforming process for PETG part |
| title_short |
Design of thermoforming process for PETG part |
| title_full |
Design of thermoforming process for PETG part |
| title_fullStr |
Design of thermoforming process for PETG part |
| title_full_unstemmed |
Design of thermoforming process for PETG part |
| title_sort |
design of thermoforming process for petg part |
| publishDate |
2016 |
| url |
http://umpir.ump.edu.my/id/eprint/16230/ http://umpir.ump.edu.my/id/eprint/16230/ http://umpir.ump.edu.my/id/eprint/16230/1/Design%20of%20thermoforming%20process%20for%20PETG%20part-Table%20of%20contents-FKP-Nur%20Anis%20Arina%20Mokhzan-CD%2010435.pdf http://umpir.ump.edu.my/id/eprint/16230/7/Design%20of%20thermoforming%20process%20for%20PETG%20part-Abstract-FKP-Nur%20Anis%20Arina%20Mokhzan-CD%2010435.pdf http://umpir.ump.edu.my/id/eprint/16230/8/Design%20of%20thermoforming%20process%20for%20PETG%20part-Chapter%201-FKP-Nur%20Anis%20Arina%20Mokhzan-CD%2010435.pdf http://umpir.ump.edu.my/id/eprint/16230/9/Design%20of%20thermoforming%20process%20for%20PETG%20part-References-FKP-Nur%20Anis%20Arina%20Mokhzan-CD%2010435.pdf |
| first_indexed |
2023-09-18T22:21:43Z |
| last_indexed |
2023-09-18T22:21:43Z |
| _version_ |
1777415701051473920 |