Application of Co/Al2O3 Catalyst in Steam Reforming of Glycerol
Alumina-supported cobalt catalyst has been employed in a fixed bed reactor for the direct production of synthesis gas from glycerol steam reforming. Physicochemical properties of the Co/Al2O3 catalyst were determined from N2 physisorption, H2 chemisorption, CO2 and NH3-TPD study as well as X-ray...
Main Author: | |
---|---|
Format: | Conference or Workshop Item |
Language: | English |
Published: |
2010
|
Subjects: | |
Online Access: | http://umpir.ump.edu.my/id/eprint/1695/ http://umpir.ump.edu.my/id/eprint/1695/1/CHEMECA_CCK_AAA_001.pdf |
id |
ump-1695 |
---|---|
recordtype |
eprints |
spelling |
ump-16952018-01-11T03:36:29Z http://umpir.ump.edu.my/id/eprint/1695/ Application of Co/Al2O3 Catalyst in Steam Reforming of Glycerol Cheng, C. K. TP Chemical technology Alumina-supported cobalt catalyst has been employed in a fixed bed reactor for the direct production of synthesis gas from glycerol steam reforming. Physicochemical properties of the Co/Al2O3 catalyst were determined from N2 physisorption, H2 chemisorption, CO2 and NH3-TPD study as well as X-ray diffraction analysis. Both Lewis and Brönsted acid sites are present on the catalyst surface. The acid:basic site ratio is about 6. Glycerol conversion of between 30 to 65% with relatively large H2:CO ratio (6 to 12) and near-stoichiometric values of H2:CO2 ratio (2 to 2.20) were obtained depending on feed composition (30 to 60wt% glycerol mixture). The glycerol consumption rate appeared to be a weak function of glycerol (0.1) and has 0.4 order with respect to the steam partial pressure. Increased glycerol partial pressure led to high carbon deposition (TOC values of 20 to 24%). However, removal of the deposited carbon was essentially complete following a TPO(air)-TPR(H2) scheme. 2010 Conference or Workshop Item PeerReviewed application/pdf en http://umpir.ump.edu.my/id/eprint/1695/1/CHEMECA_CCK_AAA_001.pdf Cheng, C. K. (2010) Application of Co/Al2O3 Catalyst in Steam Reforming of Glycerol. In: CHEMECA 2010, 26 - 29 September 2010 , Hilton Adelaide, South Australia. pp. 1-11.. |
repository_type |
Digital Repository |
institution_category |
Local University |
institution |
Universiti Malaysia Pahang |
building |
UMP Institutional Repository |
collection |
Online Access |
language |
English |
topic |
TP Chemical technology |
spellingShingle |
TP Chemical technology Cheng, C. K. Application of Co/Al2O3 Catalyst in Steam Reforming of Glycerol |
description |
Alumina-supported cobalt catalyst has been employed in a fixed bed reactor for
the direct production of synthesis gas from glycerol steam reforming. Physicochemical
properties of the Co/Al2O3 catalyst were determined from N2 physisorption, H2
chemisorption, CO2 and NH3-TPD study as well as X-ray diffraction analysis. Both
Lewis and Brönsted acid sites are present on the catalyst surface. The acid:basic site
ratio is about 6. Glycerol conversion of between 30 to 65% with relatively large H2:CO
ratio (6 to 12) and near-stoichiometric values of H2:CO2 ratio (2 to 2.20) were obtained
depending on feed composition (30 to 60wt% glycerol mixture). The glycerol
consumption rate appeared to be a weak function of glycerol (0.1) and has 0.4 order
with respect to the steam partial pressure. Increased glycerol partial pressure led to high
carbon deposition (TOC values of 20 to 24%). However, removal of the deposited
carbon was essentially complete following a TPO(air)-TPR(H2) scheme. |
format |
Conference or Workshop Item |
author |
Cheng, C. K. |
author_facet |
Cheng, C. K. |
author_sort |
Cheng, C. K. |
title |
Application of Co/Al2O3 Catalyst in Steam Reforming of Glycerol |
title_short |
Application of Co/Al2O3 Catalyst in Steam Reforming of Glycerol |
title_full |
Application of Co/Al2O3 Catalyst in Steam Reforming of Glycerol |
title_fullStr |
Application of Co/Al2O3 Catalyst in Steam Reforming of Glycerol |
title_full_unstemmed |
Application of Co/Al2O3 Catalyst in Steam Reforming of Glycerol |
title_sort |
application of co/al2o3 catalyst in steam reforming of glycerol |
publishDate |
2010 |
url |
http://umpir.ump.edu.my/id/eprint/1695/ http://umpir.ump.edu.my/id/eprint/1695/1/CHEMECA_CCK_AAA_001.pdf |
first_indexed |
2023-09-18T21:54:52Z |
last_indexed |
2023-09-18T21:54:52Z |
_version_ |
1777414011437973504 |