Effect of High-Speed Milling Tool Path Strategies on the Surface Roughness of Stavax ESR Mold Insert Machining
High speed milling is one of the recent technologies used to produce mould inserts due to the need for high surface finish. It is a faster machining process where it uses a small side step and a small down step combined with very high spindle speed and feed rate. In order to effectively use the HSM...
Main Authors: | Mebrahitom, A., Rizuan, D., Azmir, Azhari, M., Nassif |
---|---|
Format: | Conference or Workshop Item |
Language: | English |
Published: |
IOP Publishing
2016
|
Subjects: | |
Online Access: | http://umpir.ump.edu.my/id/eprint/17441/ http://umpir.ump.edu.my/id/eprint/17441/ http://umpir.ump.edu.my/id/eprint/17441/1/DR.%20Mebrahitom%20%28%20Effect%20of%20high%20speed%20milling%20tool%20path%20strategies%20on...%29.pdf |
Similar Items
-
Examination of Machining Parameters on the Surface Roughness of Stavax ESR Materials using EDM
by: Mebrahitom, A., et al.
Published: (2014) -
Remaining Tool Life Prediction Based On Force Sensors Signals During End Milling Of Stavax ESR Tool Steel
by: Mebrahitom, A., et al.
Published: (2017) -
Effects of tool path strategies on surface roughness in high speed milling
by: Abdul Rashid, Muhammad
Published: (2012) -
Study of material removal rate and electrode wear ratio for micro electrical discharge milling of AISI 420 and Stavax ESR
by: Mohammad, Yeakub Ali, et al.
Published: (2009) -
Prediction of surface roughness in high speed machining of Inconel 718
by: Suhaily, Mokhtar, et al.
Published: (2011)