Strength, Water Absorption And Thermal Comfort Of Mortar Bricks Containing Crushed Ceramic Waste

This present study investigated the crushed ceramic waste utilisation as sand replacement in solid mortar bricks. The percentage of crushed ceramic waste used were 0% (CW0), 10% (CW10), 20% (CW20) and 30% (CW30) from the total weight of sand. The dimension prescribed of mortar bricks are 215 mm x 10...

Full description

Bibliographic Details
Main Authors:	Noorli, Ismail, Norhafizah, Salleh, Noor Faezah, Mohd Yusof, Zalipah, Jamellodin, Mohd Faizal, Md Jaafar
Format:	Article
Language:	English
Published:	Penerbit Universiti Teknologi Malaysia 2017
Subjects:	T Technology (General) TA Engineering (General). Civil engineering (General)
Online Access:	http://umpir.ump.edu.my/id/eprint/18913/ http://umpir.ump.edu.my/id/eprint/18913/ http://umpir.ump.edu.my/id/eprint/18913/ http://umpir.ump.edu.my/id/eprint/18913/1/strength%2C%20water%20absorption%20and%20thermal%20comfort%20of%20mortar%20bricks%20containing%20crushed%20ceramic%20waste.pdf

id	ump-18913
recordtype	eprints
spelling	ump-189132018-05-03T07:03:17Z http://umpir.ump.edu.my/id/eprint/18913/ Strength, Water Absorption And Thermal Comfort Of Mortar Bricks Containing Crushed Ceramic Waste Noorli, Ismail Norhafizah, Salleh Noor Faezah, Mohd Yusof Zalipah, Jamellodin Mohd Faizal, Md Jaafar T Technology (General) TA Engineering (General). Civil engineering (General) This present study investigated the crushed ceramic waste utilisation as sand replacement in solid mortar bricks. The percentage of crushed ceramic waste used were 0% (CW0), 10% (CW10), 20% (CW20) and 30% (CW30) from the total weight of sand. The dimension prescribed of mortar bricks are 215 mm x 102.5 mm x 65 mm as followed accordance to MS 2281:2010 and BS EN 771-1:2011+A1:2015. Four (4) tests were conducted on mortar bricks namely crushing strength, water absorption, compressive strength of masonry units and thermal comfort. The incorporation of ceramic waste in all designated mortar bricks showed the increment of crushing strength between 23% and 46% at 28 days of curing and decrement water absorption between 34% and 44% was recorded corresponding to control mortar bricks. The prism test of masonry units consists of mortar bricks containing ceramic waste indicated the high increment of compressive strength at about 200% as compared to mortar brick without ceramic waste. The thermal comfort test of ceramic mortar bricks were also showed the good insulation with low interior temperature. Therefore, the ceramic waste can be utilised as a material replacement to fine aggregate in mortar brick productions due to significant outcomes performed. Penerbit Universiti Teknologi Malaysia 2017 Article PeerReviewed application/pdf en http://umpir.ump.edu.my/id/eprint/18913/1/strength%2C%20water%20absorption%20and%20thermal%20comfort%20of%20mortar%20bricks%20containing%20crushed%20ceramic%20waste.pdf Noorli, Ismail and Norhafizah, Salleh and Noor Faezah, Mohd Yusof and Zalipah, Jamellodin and Mohd Faizal, Md Jaafar (2017) Strength, Water Absorption And Thermal Comfort Of Mortar Bricks Containing Crushed Ceramic Waste. Jurnal Teknologi (Sciences and Engineering), 79 (7). pp. 167-173. ISSN 0127-9696 (print); 2180-3722 (online) http://dx.doi.org/10.11113/jt.v79.10909 doi: 10.11113/jt.v79.10909
repository_type	Digital Repository
institution_category	Local University
institution	Universiti Malaysia Pahang
building	UMP Institutional Repository
collection	Online Access
language	English
topic	T Technology (General) TA Engineering (General). Civil engineering (General)
spellingShingle	T Technology (General) TA Engineering (General). Civil engineering (General) Noorli, Ismail Norhafizah, Salleh Noor Faezah, Mohd Yusof Zalipah, Jamellodin Mohd Faizal, Md Jaafar Strength, Water Absorption And Thermal Comfort Of Mortar Bricks Containing Crushed Ceramic Waste
description	This present study investigated the crushed ceramic waste utilisation as sand replacement in solid mortar bricks. The percentage of crushed ceramic waste used were 0% (CW0), 10% (CW10), 20% (CW20) and 30% (CW30) from the total weight of sand. The dimension prescribed of mortar bricks are 215 mm x 102.5 mm x 65 mm as followed accordance to MS 2281:2010 and BS EN 771-1:2011+A1:2015. Four (4) tests were conducted on mortar bricks namely crushing strength, water absorption, compressive strength of masonry units and thermal comfort. The incorporation of ceramic waste in all designated mortar bricks showed the increment of crushing strength between 23% and 46% at 28 days of curing and decrement water absorption between 34% and 44% was recorded corresponding to control mortar bricks. The prism test of masonry units consists of mortar bricks containing ceramic waste indicated the high increment of compressive strength at about 200% as compared to mortar brick without ceramic waste. The thermal comfort test of ceramic mortar bricks were also showed the good insulation with low interior temperature. Therefore, the ceramic waste can be utilised as a material replacement to fine aggregate in mortar brick productions due to significant outcomes performed.
format	Article
author	Noorli, Ismail Norhafizah, Salleh Noor Faezah, Mohd Yusof Zalipah, Jamellodin Mohd Faizal, Md Jaafar
author_facet	Noorli, Ismail Norhafizah, Salleh Noor Faezah, Mohd Yusof Zalipah, Jamellodin Mohd Faizal, Md Jaafar
author_sort	Noorli, Ismail
title	Strength, Water Absorption And Thermal Comfort Of Mortar Bricks Containing Crushed Ceramic Waste
title_short	Strength, Water Absorption And Thermal Comfort Of Mortar Bricks Containing Crushed Ceramic Waste
title_full	Strength, Water Absorption And Thermal Comfort Of Mortar Bricks Containing Crushed Ceramic Waste
title_fullStr	Strength, Water Absorption And Thermal Comfort Of Mortar Bricks Containing Crushed Ceramic Waste
title_full_unstemmed	Strength, Water Absorption And Thermal Comfort Of Mortar Bricks Containing Crushed Ceramic Waste
title_sort	strength, water absorption and thermal comfort of mortar bricks containing crushed ceramic waste
publisher	Penerbit Universiti Teknologi Malaysia
publishDate	2017
url	http://umpir.ump.edu.my/id/eprint/18913/ http://umpir.ump.edu.my/id/eprint/18913/ http://umpir.ump.edu.my/id/eprint/18913/ http://umpir.ump.edu.my/id/eprint/18913/1/strength%2C%20water%20absorption%20and%20thermal%20comfort%20of%20mortar%20bricks%20containing%20crushed%20ceramic%20waste.pdf
first_indexed	2023-09-18T22:27:01Z
last_indexed	2023-09-18T22:27:01Z
_version_	1777416034233352192

Strength, Water Absorption And Thermal Comfort Of Mortar Bricks Containing Crushed Ceramic Waste

Similar Items