Automated guided conveyor (AGC)
This project is focused on development of the control system for Automated Guided Conveyor (AGC) by using PIC 18F4550. Two approaches are proposed for this project; hardware approach where involves the development and design of AGC prototype, line follower, sensor circuit and controller circuit and...
Main Author: | |
---|---|
Format: | Undergraduates Project Papers |
Language: | English |
Published: |
2010
|
Subjects: | |
Online Access: | http://umpir.ump.edu.my/id/eprint/1902/ http://umpir.ump.edu.my/id/eprint/1902/ http://umpir.ump.edu.my/id/eprint/1902/1/Nor_Azzah_Abu_Azmi_%28_CD_5013_%29.pdf |
id |
ump-1902 |
---|---|
recordtype |
eprints |
spelling |
ump-19022015-03-03T07:53:29Z http://umpir.ump.edu.my/id/eprint/1902/ Automated guided conveyor (AGC) Nor Azzah, Abu Azmi TJ Mechanical engineering and machinery This project is focused on development of the control system for Automated Guided Conveyor (AGC) by using PIC 18F4550. Two approaches are proposed for this project; hardware approach where involves the development and design of AGC prototype, line follower, sensor circuit and controller circuit and software approach when the system of AGC are write by using microcode studio programmed. This project concentrates on developing the automatic system for AGC which about how the AGC will operate, involve of the movement mechanism. This prototype takes into account when AGC travel and also tries to travel in order by following the line follower. This thesis also includes the test automatic system involving test program and test circuit for the AGC before proceed to the prototype AGC control system. 2010-12 Undergraduates Project Papers NonPeerReviewed application/pdf en http://umpir.ump.edu.my/id/eprint/1902/1/Nor_Azzah_Abu_Azmi_%28_CD_5013_%29.pdf Nor Azzah, Abu Azmi (2010) Automated guided conveyor (AGC). Faculty of Mechanical Engineering, Universiti Malaysia Pahang. http://iportal.ump.edu.my/lib/item?id=chamo:52415&theme=UMP2 |
repository_type |
Digital Repository |
institution_category |
Local University |
institution |
Universiti Malaysia Pahang |
building |
UMP Institutional Repository |
collection |
Online Access |
language |
English |
topic |
TJ Mechanical engineering and machinery |
spellingShingle |
TJ Mechanical engineering and machinery Nor Azzah, Abu Azmi Automated guided conveyor (AGC) |
description |
This project is focused on development of the control system for Automated Guided Conveyor (AGC) by using PIC 18F4550. Two approaches are proposed for this project; hardware approach where involves the development and design of AGC prototype, line follower, sensor circuit and controller circuit and software approach when the system of AGC are write by using microcode studio programmed. This project concentrates on developing the automatic system for AGC which about how the AGC will operate, involve of the movement mechanism. This prototype takes into account when AGC travel and also tries to travel in order by following the line follower. This thesis also includes the test automatic system involving test program and test circuit for the AGC before proceed to the prototype AGC control system. |
format |
Undergraduates Project Papers |
author |
Nor Azzah, Abu Azmi |
author_facet |
Nor Azzah, Abu Azmi |
author_sort |
Nor Azzah, Abu Azmi |
title |
Automated guided conveyor (AGC) |
title_short |
Automated guided conveyor (AGC) |
title_full |
Automated guided conveyor (AGC) |
title_fullStr |
Automated guided conveyor (AGC) |
title_full_unstemmed |
Automated guided conveyor (AGC) |
title_sort |
automated guided conveyor (agc) |
publishDate |
2010 |
url |
http://umpir.ump.edu.my/id/eprint/1902/ http://umpir.ump.edu.my/id/eprint/1902/ http://umpir.ump.edu.my/id/eprint/1902/1/Nor_Azzah_Abu_Azmi_%28_CD_5013_%29.pdf |
first_indexed |
2023-09-18T21:55:13Z |
last_indexed |
2023-09-18T21:55:13Z |
_version_ |
1777414034041077760 |