Modal analysis of fixed-fixed beam

This project work describes in detail, includes a brief description of the Modal Analysis of Fixed-Fixed Beam, supplemented by a good number of necessary and descriptive drawings which makes this project report very easy to understand. The objective of this project is to determine the dynamic behavi...

Full description

Bibliographic Details
Main Author:	Siti Sarah, Ahmad
Format:	Undergraduates Project Papers
Language:	English
Published:	2010
Subjects:	TA Engineering (General). Civil engineering (General)
Online Access:	http://umpir.ump.edu.my/id/eprint/1911/ http://umpir.ump.edu.my/id/eprint/1911/ http://umpir.ump.edu.my/id/eprint/1911/1/Siti_Sarah_Ahmad_%28_CD_5014_%29.pdf

id	ump-1911
recordtype	eprints
spelling	ump-19112015-03-03T07:53:32Z http://umpir.ump.edu.my/id/eprint/1911/ Modal analysis of fixed-fixed beam Siti Sarah, Ahmad TA Engineering (General). Civil engineering (General) This project work describes in detail, includes a brief description of the Modal Analysis of Fixed-Fixed Beam, supplemented by a good number of necessary and descriptive drawings which makes this project report very easy to understand. The objective of this project is to determine the dynamic behaviour or modal characteristics of fixed-fixed beam using modal analysis. There are two methods used in this project which are simulation by using Algor software and experimental by using Hammer Excitation. In addition to these, the report also contains the details regarding the different type of natural frequencies and mode shapes. In simulation, the natural frequency based on the mesh size starting from 100%,90%,80% and 70%. The result obtained from the minimum value of natural frequency lies between range 113.1345Hz and 160.0712Hz which refer to the Mode 1. Mode 5 of the maximum value of natural frequency is in the range of 640.0954Hz until 713.1101Hz. By comparing with the experimental results, the average of first point is 163Hz and the fifth point is 740.5Hz. Both results show that there are no much different as the errors are between 0.13% until 2.45%. The result from both method can be accepted regarding to the objective achieved. 2010-12 Undergraduates Project Papers NonPeerReviewed application/pdf en http://umpir.ump.edu.my/id/eprint/1911/1/Siti_Sarah_Ahmad_%28_CD_5014_%29.pdf Siti Sarah, Ahmad (2010) Modal analysis of fixed-fixed beam. Faculty of Mechanical Engineering, Universiti Malaysia Pahang. http://iportal.ump.edu.my/lib/item?id=chamo:52445&theme=UMP2
repository_type	Digital Repository
institution_category	Local University
institution	Universiti Malaysia Pahang
building	UMP Institutional Repository
collection	Online Access
language	English
topic	TA Engineering (General). Civil engineering (General)
spellingShingle	TA Engineering (General). Civil engineering (General) Siti Sarah, Ahmad Modal analysis of fixed-fixed beam
description	This project work describes in detail, includes a brief description of the Modal Analysis of Fixed-Fixed Beam, supplemented by a good number of necessary and descriptive drawings which makes this project report very easy to understand. The objective of this project is to determine the dynamic behaviour or modal characteristics of fixed-fixed beam using modal analysis. There are two methods used in this project which are simulation by using Algor software and experimental by using Hammer Excitation. In addition to these, the report also contains the details regarding the different type of natural frequencies and mode shapes. In simulation, the natural frequency based on the mesh size starting from 100%,90%,80% and 70%. The result obtained from the minimum value of natural frequency lies between range 113.1345Hz and 160.0712Hz which refer to the Mode 1. Mode 5 of the maximum value of natural frequency is in the range of 640.0954Hz until 713.1101Hz. By comparing with the experimental results, the average of first point is 163Hz and the fifth point is 740.5Hz. Both results show that there are no much different as the errors are between 0.13% until 2.45%. The result from both method can be accepted regarding to the objective achieved.
format	Undergraduates Project Papers
author	Siti Sarah, Ahmad
author_facet	Siti Sarah, Ahmad
author_sort	Siti Sarah, Ahmad
title	Modal analysis of fixed-fixed beam
title_short	Modal analysis of fixed-fixed beam
title_full	Modal analysis of fixed-fixed beam
title_fullStr	Modal analysis of fixed-fixed beam
title_full_unstemmed	Modal analysis of fixed-fixed beam
title_sort	modal analysis of fixed-fixed beam
publishDate	2010
url	http://umpir.ump.edu.my/id/eprint/1911/ http://umpir.ump.edu.my/id/eprint/1911/ http://umpir.ump.edu.my/id/eprint/1911/1/Siti_Sarah_Ahmad_%28_CD_5014_%29.pdf
first_indexed	2023-09-18T21:55:15Z
last_indexed	2023-09-18T21:55:15Z
_version_	1777414035348652032

Modal analysis of fixed-fixed beam

Similar Items