Effect of pipe diameter in piping system using acoustic emission technique

This project was carried out as a study of effect of pipe diameter different and different pressure in piping system by using Acoustic Emission technique. The objective of this research is to investigate the flow rate in the piping system due to the pipe diameter difference and pressure different an...

Full description

Bibliographic Details
Main Author:	Wan Mohamad Asyraf, Wan Zahari
Format:	Undergraduates Project Papers
Language:	English
Published:	2010
Subjects:	TA Engineering (General). Civil engineering (General)
Online Access:	http://umpir.ump.edu.my/id/eprint/1913/ http://umpir.ump.edu.my/id/eprint/1913/ http://umpir.ump.edu.my/id/eprint/1913/1/Wan_Mohamed_Asyraf_B_Wan_Zahari_%28_CD_4976_%29.pdf

id	ump-1913
recordtype	eprints
spelling	ump-19132015-03-03T07:53:32Z http://umpir.ump.edu.my/id/eprint/1913/ Effect of pipe diameter in piping system using acoustic emission technique Wan Mohamad Asyraf, Wan Zahari TA Engineering (General). Civil engineering (General) This project was carried out as a study of effect of pipe diameter different and different pressure in piping system by using Acoustic Emission technique. The objective of this research is to investigate the flow rate in the piping system due to the pipe diameter difference and pressure different and evaluates type of signal produce from the acoustic emission technique for each type of pipe diameter in piping systems. A test rigs consist of a galvanized steel pipe that have two different diameters to run the experiments. The liquid that has been used is water and it controlled by the ball valve to setting the three different pressures. The source of the AE signal was from the ball valve that controlled the pressure but the effect of different diameter also play it roll because it can give a different flow rate that will show either the flow of water is low or high turbulent flow. The signal was captured using AE sensor with help of Acoustic Emission Detector 2.1.3 software. For all pipe diameter and pressure, the values of hits, counts and RMS (average, minimum and maximum) were recorded and analyzed. All the value recorded was compared to the different of pipe diameter and different pressure. The result shows that there almost no AE activities on the pipe that has big diameter compare to the smaller one. The conclusion has shown that the big pipe diameter will secure the safety because of the flow of the water that enter the pipe is low in flow rate and produced low turbulent flow compare to the small pipe diameter. 2010-12 Undergraduates Project Papers NonPeerReviewed application/pdf en http://umpir.ump.edu.my/id/eprint/1913/1/Wan_Mohamed_Asyraf_B_Wan_Zahari_%28_CD_4976_%29.pdf Wan Mohamad Asyraf, Wan Zahari (2010) Effect of pipe diameter in piping system using acoustic emission technique. Faculty of Mechanical Engineering, Universiti Malaysia Pahang. http://iportal.ump.edu.my/lib/item?id=chamo:52772&theme=UMP2
repository_type	Digital Repository
institution_category	Local University
institution	Universiti Malaysia Pahang
building	UMP Institutional Repository
collection	Online Access
language	English
topic	TA Engineering (General). Civil engineering (General)
spellingShingle	TA Engineering (General). Civil engineering (General) Wan Mohamad Asyraf, Wan Zahari Effect of pipe diameter in piping system using acoustic emission technique
description	This project was carried out as a study of effect of pipe diameter different and different pressure in piping system by using Acoustic Emission technique. The objective of this research is to investigate the flow rate in the piping system due to the pipe diameter difference and pressure different and evaluates type of signal produce from the acoustic emission technique for each type of pipe diameter in piping systems. A test rigs consist of a galvanized steel pipe that have two different diameters to run the experiments. The liquid that has been used is water and it controlled by the ball valve to setting the three different pressures. The source of the AE signal was from the ball valve that controlled the pressure but the effect of different diameter also play it roll because it can give a different flow rate that will show either the flow of water is low or high turbulent flow. The signal was captured using AE sensor with help of Acoustic Emission Detector 2.1.3 software. For all pipe diameter and pressure, the values of hits, counts and RMS (average, minimum and maximum) were recorded and analyzed. All the value recorded was compared to the different of pipe diameter and different pressure. The result shows that there almost no AE activities on the pipe that has big diameter compare to the smaller one. The conclusion has shown that the big pipe diameter will secure the safety because of the flow of the water that enter the pipe is low in flow rate and produced low turbulent flow compare to the small pipe diameter.
format	Undergraduates Project Papers
author	Wan Mohamad Asyraf, Wan Zahari
author_facet	Wan Mohamad Asyraf, Wan Zahari
author_sort	Wan Mohamad Asyraf, Wan Zahari
title	Effect of pipe diameter in piping system using acoustic emission technique
title_short	Effect of pipe diameter in piping system using acoustic emission technique
title_full	Effect of pipe diameter in piping system using acoustic emission technique
title_fullStr	Effect of pipe diameter in piping system using acoustic emission technique
title_full_unstemmed	Effect of pipe diameter in piping system using acoustic emission technique
title_sort	effect of pipe diameter in piping system using acoustic emission technique
publishDate	2010
url	http://umpir.ump.edu.my/id/eprint/1913/ http://umpir.ump.edu.my/id/eprint/1913/ http://umpir.ump.edu.my/id/eprint/1913/1/Wan_Mohamed_Asyraf_B_Wan_Zahari_%28_CD_4976_%29.pdf
first_indexed	2023-09-18T21:55:15Z
last_indexed	2023-09-18T21:55:15Z
_version_	1777414035630718976

Effect of pipe diameter in piping system using acoustic emission technique

Similar Items