Effect of vaned diffuser on the performance of small turbocharger

This work presents an experimental investigation of performance of small turbocharger compressor with vaned diffuser. The aim of the study is to investigate the effect of number vaned diffuser on peak pressure ratio in turbocharger. The study was carried out using cold-flow turbocharger test rig dri...

Full description

Bibliographic Details
Main Authors:	Amiruddin, Hilmi, Wan Mahmood, Wan Mohd Faizal, Abdullah, Shahrir, Abu Mansor, Mohd Radzi, Abdollah, Mohd Fadzli, R., Mamat, Alias, Azri
Format:	Article
Language:	English
Published:	Faculty of Mechanical Engineering, Universiti Teknologi MARA (UiTM), Malaysia. 2017
Subjects:	TJ Mechanical engineering and machinery TL Motor vehicles. Aeronautics. Astronautics
Online Access:	http://umpir.ump.edu.my/id/eprint/19621/ http://umpir.ump.edu.my/id/eprint/19621/ http://umpir.ump.edu.my/id/eprint/19621/1/Journal%20of%20Mechanical%20Engineering%20Vol%20SI%201%20%281%29%2C%20227-236%2C%202017.pdf

id	ump-19621
recordtype	eprints
spelling	ump-196212018-01-23T04:37:03Z http://umpir.ump.edu.my/id/eprint/19621/ Effect of vaned diffuser on the performance of small turbocharger Amiruddin, Hilmi Wan Mahmood, Wan Mohd Faizal Abdullah, Shahrir Abu Mansor, Mohd Radzi Abdollah, Mohd Fadzli R., Mamat Alias, Azri TJ Mechanical engineering and machinery TL Motor vehicles. Aeronautics. Astronautics This work presents an experimental investigation of performance of small turbocharger compressor with vaned diffuser. The aim of the study is to investigate the effect of number vaned diffuser on peak pressure ratio in turbocharger. The study was carried out using cold-flow turbocharger test rig driven by compressed air with the impeller rotational speed from 40,000 to 70,000 rpm. Tests were conducted with 6, 8 and 10 number of vanes while maintaining the vane blades angle of 6°, turning angle of 30° and blade length of 21.8 mm. The vanes as a flow deflector were designed as a thin flat plate of 1 mm thickness. All the results were compared with original vaneless diffuser of the compressor. The results found that the proposed design of 6 and 8 vanes shifted the peak pressure ratio toward low mass flow rate region. It was observed that modification from conventional vaneless diffuser compressor to the one equipped with vaned diffuser has significant improvement on the overall pressure ratio of the turbocharger. Faculty of Mechanical Engineering, Universiti Teknologi MARA (UiTM), Malaysia. 2017-01-19 Article PeerReviewed application/pdf en http://umpir.ump.edu.my/id/eprint/19621/1/Journal%20of%20Mechanical%20Engineering%20Vol%20SI%201%20%281%29%2C%20227-236%2C%202017.pdf Amiruddin, Hilmi and Wan Mahmood, Wan Mohd Faizal and Abdullah, Shahrir and Abu Mansor, Mohd Radzi and Abdollah, Mohd Fadzli and R., Mamat and Alias, Azri (2017) Effect of vaned diffuser on the performance of small turbocharger. Journal of Mechanical Engineering, SI (1). pp. 227-236. ISSN 1823-5514 https://jmeche.uitm.edu.my/
repository_type	Digital Repository
institution_category	Local University
institution	Universiti Malaysia Pahang
building	UMP Institutional Repository
collection	Online Access
language	English
topic	TJ Mechanical engineering and machinery TL Motor vehicles. Aeronautics. Astronautics
spellingShingle	TJ Mechanical engineering and machinery TL Motor vehicles. Aeronautics. Astronautics Amiruddin, Hilmi Wan Mahmood, Wan Mohd Faizal Abdullah, Shahrir Abu Mansor, Mohd Radzi Abdollah, Mohd Fadzli R., Mamat Alias, Azri Effect of vaned diffuser on the performance of small turbocharger
description	This work presents an experimental investigation of performance of small turbocharger compressor with vaned diffuser. The aim of the study is to investigate the effect of number vaned diffuser on peak pressure ratio in turbocharger. The study was carried out using cold-flow turbocharger test rig driven by compressed air with the impeller rotational speed from 40,000 to 70,000 rpm. Tests were conducted with 6, 8 and 10 number of vanes while maintaining the vane blades angle of 6°, turning angle of 30° and blade length of 21.8 mm. The vanes as a flow deflector were designed as a thin flat plate of 1 mm thickness. All the results were compared with original vaneless diffuser of the compressor. The results found that the proposed design of 6 and 8 vanes shifted the peak pressure ratio toward low mass flow rate region. It was observed that modification from conventional vaneless diffuser compressor to the one equipped with vaned diffuser has significant improvement on the overall pressure ratio of the turbocharger.
format	Article
author	Amiruddin, Hilmi Wan Mahmood, Wan Mohd Faizal Abdullah, Shahrir Abu Mansor, Mohd Radzi Abdollah, Mohd Fadzli R., Mamat Alias, Azri
author_facet	Amiruddin, Hilmi Wan Mahmood, Wan Mohd Faizal Abdullah, Shahrir Abu Mansor, Mohd Radzi Abdollah, Mohd Fadzli R., Mamat Alias, Azri
author_sort	Amiruddin, Hilmi
title	Effect of vaned diffuser on the performance of small turbocharger
title_short	Effect of vaned diffuser on the performance of small turbocharger
title_full	Effect of vaned diffuser on the performance of small turbocharger
title_fullStr	Effect of vaned diffuser on the performance of small turbocharger
title_full_unstemmed	Effect of vaned diffuser on the performance of small turbocharger
title_sort	effect of vaned diffuser on the performance of small turbocharger
publisher	Faculty of Mechanical Engineering, Universiti Teknologi MARA (UiTM), Malaysia.
publishDate	2017
url	http://umpir.ump.edu.my/id/eprint/19621/ http://umpir.ump.edu.my/id/eprint/19621/ http://umpir.ump.edu.my/id/eprint/19621/1/Journal%20of%20Mechanical%20Engineering%20Vol%20SI%201%20%281%29%2C%20227-236%2C%202017.pdf
first_indexed	2023-09-18T22:28:04Z
last_indexed	2023-09-18T22:28:04Z
_version_	1777416100549492736

Effect of vaned diffuser on the performance of small turbocharger

Similar Items