Finite Element Simulation of Aluminium/GFRP Fibre Metal Laminate under Tensile Loading

The response of a fibre metal laminate (FML) model to the tensile loading is predicted through a computational approach. The FML consisted with layers of aluminum alloy and embedded with one layer of composite material, Glass fibre Reinforced Plastic (GFRP). The glass fibre and aluminium alloy 2024-...

Full description

Bibliographic Details
Main Authors:	M. N. M., Merzuki, M. R. M., Rejab, Bachtiar, Dandi, Siregar, J. P., M. F., Rani, Salwani, Mohd Salleh
Format:	Conference or Workshop Item
Language:	English
Published:	IOP Publishing 2018
Subjects:	TJ Mechanical engineering and machinery
Online Access:	http://umpir.ump.edu.my/id/eprint/21029/ http://umpir.ump.edu.my/id/eprint/21029/ http://umpir.ump.edu.my/id/eprint/21029/12/Finite%20Element%20Simulation%20of%20AluminiumGFRP.pdf

id	ump-21029
recordtype	eprints
spelling	ump-210292019-09-04T02:40:24Z http://umpir.ump.edu.my/id/eprint/21029/ Finite Element Simulation of Aluminium/GFRP Fibre Metal Laminate under Tensile Loading M. N. M., Merzuki M. R. M., Rejab Bachtiar, Dandi Siregar, J. P. M. F., Rani Salwani, Mohd Salleh TJ Mechanical engineering and machinery The response of a fibre metal laminate (FML) model to the tensile loading is predicted through a computational approach. The FML consisted with layers of aluminum alloy and embedded with one layer of composite material, Glass fibre Reinforced Plastic (GFRP). The glass fibre and aluminium alloy 2024-0 was laminated by using thermoset epoxy. A compression moulding technique was used in the process of a FML fabrication. The aluminium has been roughen by a metal sanding method which to improve the bonding between the fibre and metal layer. The main objective of this paper is to determine the failure behaviour of the FML under the tensile loading. The responses on the FML under the tensile loading were numerically performed. The FML was modelled and analysed by using Abaqus/CAE 6.13 version. Based on the experimental and FE data of the tensile, the ultimate tensile stress is 120 MPa where delamination and fibre breakage happened. A numerical model was developed and agreed well with the experimental results. The laminate has an inelastic respond to increase the tensile loads which due to the plasticity of the aluminium layers. IOP Publishing 2018 Conference or Workshop Item PeerReviewed pdf en cc_by http://umpir.ump.edu.my/id/eprint/21029/12/Finite%20Element%20Simulation%20of%20AluminiumGFRP.pdf M. N. M., Merzuki and M. R. M., Rejab and Bachtiar, Dandi and Siregar, J. P. and M. F., Rani and Salwani, Mohd Salleh (2018) Finite Element Simulation of Aluminium/GFRP Fibre Metal Laminate under Tensile Loading. In: IOP Conference Series: Materials Science and Engineering, Malaysian Technical Universities Conference on Engineering and Technology 2017 (MUCET 2017), 6-7 December 2017 , Penang, Malaysia. pp. 1-6., 318 (012072). ISSN 1757-8981 https://doi.org/10.1088/1757-899X/318/1/012072
repository_type	Digital Repository
institution_category	Local University
institution	Universiti Malaysia Pahang
building	UMP Institutional Repository
collection	Online Access
language	English
topic	TJ Mechanical engineering and machinery
spellingShingle	TJ Mechanical engineering and machinery M. N. M., Merzuki M. R. M., Rejab Bachtiar, Dandi Siregar, J. P. M. F., Rani Salwani, Mohd Salleh Finite Element Simulation of Aluminium/GFRP Fibre Metal Laminate under Tensile Loading
description	The response of a fibre metal laminate (FML) model to the tensile loading is predicted through a computational approach. The FML consisted with layers of aluminum alloy and embedded with one layer of composite material, Glass fibre Reinforced Plastic (GFRP). The glass fibre and aluminium alloy 2024-0 was laminated by using thermoset epoxy. A compression moulding technique was used in the process of a FML fabrication. The aluminium has been roughen by a metal sanding method which to improve the bonding between the fibre and metal layer. The main objective of this paper is to determine the failure behaviour of the FML under the tensile loading. The responses on the FML under the tensile loading were numerically performed. The FML was modelled and analysed by using Abaqus/CAE 6.13 version. Based on the experimental and FE data of the tensile, the ultimate tensile stress is 120 MPa where delamination and fibre breakage happened. A numerical model was developed and agreed well with the experimental results. The laminate has an inelastic respond to increase the tensile loads which due to the plasticity of the aluminium layers.
format	Conference or Workshop Item
author	M. N. M., Merzuki M. R. M., Rejab Bachtiar, Dandi Siregar, J. P. M. F., Rani Salwani, Mohd Salleh
author_facet	M. N. M., Merzuki M. R. M., Rejab Bachtiar, Dandi Siregar, J. P. M. F., Rani Salwani, Mohd Salleh
author_sort	M. N. M., Merzuki
title	Finite Element Simulation of Aluminium/GFRP Fibre Metal Laminate under Tensile Loading
title_short	Finite Element Simulation of Aluminium/GFRP Fibre Metal Laminate under Tensile Loading
title_full	Finite Element Simulation of Aluminium/GFRP Fibre Metal Laminate under Tensile Loading
title_fullStr	Finite Element Simulation of Aluminium/GFRP Fibre Metal Laminate under Tensile Loading
title_full_unstemmed	Finite Element Simulation of Aluminium/GFRP Fibre Metal Laminate under Tensile Loading
title_sort	finite element simulation of aluminium/gfrp fibre metal laminate under tensile loading
publisher	IOP Publishing
publishDate	2018
url	http://umpir.ump.edu.my/id/eprint/21029/ http://umpir.ump.edu.my/id/eprint/21029/ http://umpir.ump.edu.my/id/eprint/21029/12/Finite%20Element%20Simulation%20of%20AluminiumGFRP.pdf
first_indexed	2023-09-18T22:30:41Z
last_indexed	2023-09-18T22:30:41Z
_version_	1777416265493643264

Finite Element Simulation of Aluminium/GFRP Fibre Metal Laminate under Tensile Loading

Similar Items