Current and frequency control of induction generator : simulation using MATLAB

Induction machine is the most widely used machine nowadays in industry and generation systems. It haves two mains types that usually use, squirrel cage and wound type. This project is about the control of current and frequency of wound rotor induction generator in wind turbine generation system. By...

Full description

Bibliographic Details
Main Author:	Taufik, Mohd Nor
Format:	Undergraduates Project Papers
Language:	English
Published:	2010
Subjects:	TK Electrical engineering. Electronics Nuclear engineering
Online Access:	http://umpir.ump.edu.my/id/eprint/2105/ http://umpir.ump.edu.my/id/eprint/2105/ http://umpir.ump.edu.my/id/eprint/2105/2/Taufik_Mohd_Nor_%28_CD_5335_%29.pdf

id	ump-2105
recordtype	eprints
spelling	ump-21052015-03-03T07:54:44Z http://umpir.ump.edu.my/id/eprint/2105/ Current and frequency control of induction generator : simulation using MATLAB Taufik, Mohd Nor TK Electrical engineering. Electronics Nuclear engineering Induction machine is the most widely used machine nowadays in industry and generation systems. It haves two mains types that usually use, squirrel cage and wound type. This project is about the control of current and frequency of wound rotor induction generator in wind turbine generation system. By controlling the current and frequency at the rotor of the generator, the active and reactive power produce by the generator can be regulate and maximize the generator performance. To control the current and frequency of induction generator in wind turbine application, this project uses an AC/DC/AC converter that directly connected to rotor. AC/DC/AC converter is a bi-directional converter that enables the generator to operate above and below the synchronous speed thus allow the generator to generate and absorb power from the grid. This system is called Doubly Fed Induction Generator (DFIG) in wind turbine application system where the stator is directly connected to grid and the rotor is connected to grid via AC/DC/AC converter. This project use MATLAB software to simulate the system and analyze the result obtains from the simulation. From the result, it shows that this system is function successfully and the objective is achieved. 2010-12 Undergraduates Project Papers NonPeerReviewed application/pdf en http://umpir.ump.edu.my/id/eprint/2105/2/Taufik_Mohd_Nor_%28_CD_5335_%29.pdf Taufik, Mohd Nor (2010) Current and frequency control of induction generator : simulation using MATLAB. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang. http://iportal.ump.edu.my/lib/item?id=chamo:54881&theme=UMP2
repository_type	Digital Repository
institution_category	Local University
institution	Universiti Malaysia Pahang
building	UMP Institutional Repository
collection	Online Access
language	English
topic	TK Electrical engineering. Electronics Nuclear engineering
spellingShingle	TK Electrical engineering. Electronics Nuclear engineering Taufik, Mohd Nor Current and frequency control of induction generator : simulation using MATLAB
description	Induction machine is the most widely used machine nowadays in industry and generation systems. It haves two mains types that usually use, squirrel cage and wound type. This project is about the control of current and frequency of wound rotor induction generator in wind turbine generation system. By controlling the current and frequency at the rotor of the generator, the active and reactive power produce by the generator can be regulate and maximize the generator performance. To control the current and frequency of induction generator in wind turbine application, this project uses an AC/DC/AC converter that directly connected to rotor. AC/DC/AC converter is a bi-directional converter that enables the generator to operate above and below the synchronous speed thus allow the generator to generate and absorb power from the grid. This system is called Doubly Fed Induction Generator (DFIG) in wind turbine application system where the stator is directly connected to grid and the rotor is connected to grid via AC/DC/AC converter. This project use MATLAB software to simulate the system and analyze the result obtains from the simulation. From the result, it shows that this system is function successfully and the objective is achieved.
format	Undergraduates Project Papers
author	Taufik, Mohd Nor
author_facet	Taufik, Mohd Nor
author_sort	Taufik, Mohd Nor
title	Current and frequency control of induction generator : simulation using MATLAB
title_short	Current and frequency control of induction generator : simulation using MATLAB
title_full	Current and frequency control of induction generator : simulation using MATLAB
title_fullStr	Current and frequency control of induction generator : simulation using MATLAB
title_full_unstemmed	Current and frequency control of induction generator : simulation using MATLAB
title_sort	current and frequency control of induction generator : simulation using matlab
publishDate	2010
url	http://umpir.ump.edu.my/id/eprint/2105/ http://umpir.ump.edu.my/id/eprint/2105/ http://umpir.ump.edu.my/id/eprint/2105/2/Taufik_Mohd_Nor_%28_CD_5335_%29.pdf
first_indexed	2023-09-18T21:55:40Z
last_indexed	2023-09-18T21:55:40Z
_version_	1777414061508526080

Current and frequency control of induction generator : simulation using MATLAB

Similar Items