Investigation on the performance of a prototype of thermo-electric generation with heat pipe-heat sink

A significant problem in thermo-electric generators is the thermal design of the heat sink because it affects the performance of thermo-electric modules. As compared to conventional cooling systems, heat pipe heat sink have numerous advantages. Some of these advantages are: high heat-transfer rates;...

Full description

Bibliographic Details
Main Authors:	Elghool, Ali, F., Basrawi, Hassan, Ibrahim, Thamir Khalil, Ibrahim
Format:	Conference or Workshop Item
Language:	English
Published:	EDP Sciences 2017
Subjects:	TJ Mechanical engineering and machinery
Online Access:	http://umpir.ump.edu.my/id/eprint/21085/ http://umpir.ump.edu.my/id/eprint/21085/ http://umpir.ump.edu.my/id/eprint/21085/1/Investigation%20on%20the%20performance%20of%20a%20prototype%20of%20thermo-electric%20generation%20with%20heat%20pipe-heat%20sink.pdf

id	ump-21085
recordtype	eprints
spelling	ump-210852018-08-29T04:03:40Z http://umpir.ump.edu.my/id/eprint/21085/ Investigation on the performance of a prototype of thermo-electric generation with heat pipe-heat sink Elghool, Ali F., Basrawi Hassan, Ibrahim Thamir Khalil, Ibrahim TJ Mechanical engineering and machinery A significant problem in thermo-electric generators is the thermal design of the heat sink because it affects the performance of thermo-electric modules. As compared to conventional cooling systems, heat pipe heat sink have numerous advantages. Some of these advantages are: high heat-transfer rates; absence of moving parts and lack of auxiliary consumption (passive system). This paper presents the analysis of power generation using the combination of heat pipes and thermo-electric generators. The aim is to improve power output by an appropriate design of the heat sink. The average geometrical parameters of heat sink (fin height, fin space and fin thickness) were obtained from data collected from previous studies closely similar to this prototype. The prototype was tested and the temperature, voltage and current data were collected. All data were recorded by using a temperature data recorder, power meter and multimeter. It was found that the highest maximum power output was 1.925 watts at a temperature difference of 85°C. However, the prototype did not achieve the maximum output expected. This was a result of limitation of TEG model (where only one TEG was used) and the limitation of the performance of the prototype. The prototype successfully generated enough power to charge a cell phone and laptop when connected to two or three TEGs. Moreover the heat pipe heat sink needs optimization to meet the design output from the manufacturer of the TEG at hot side temperature and cold side temperature. EDP Sciences 2017-10 Conference or Workshop Item PeerReviewed pdf en http://umpir.ump.edu.my/id/eprint/21085/1/Investigation%20on%20the%20performance%20of%20a%20prototype%20of%20thermo-electric%20generation%20with%20heat%20pipe-heat%20sink.pdf Elghool, Ali and F., Basrawi and Hassan, Ibrahim and Thamir Khalil, Ibrahim (2017) Investigation on the performance of a prototype of thermo-electric generation with heat pipe-heat sink. In: UTP-UMP Symposium on Energy Systems, SES 2017, 26-27 September 2017 , Perak, Malaysia. pp. 1-7., 131. ISSN 2261236X https://www.matec-conferences.org/articles/matecconf/pdf/2017/45/matecconf_ses2017_01005.pdf
repository_type	Digital Repository
institution_category	Local University
institution	Universiti Malaysia Pahang
building	UMP Institutional Repository
collection	Online Access
language	English
topic	TJ Mechanical engineering and machinery
spellingShingle	TJ Mechanical engineering and machinery Elghool, Ali F., Basrawi Hassan, Ibrahim Thamir Khalil, Ibrahim Investigation on the performance of a prototype of thermo-electric generation with heat pipe-heat sink
description	A significant problem in thermo-electric generators is the thermal design of the heat sink because it affects the performance of thermo-electric modules. As compared to conventional cooling systems, heat pipe heat sink have numerous advantages. Some of these advantages are: high heat-transfer rates; absence of moving parts and lack of auxiliary consumption (passive system). This paper presents the analysis of power generation using the combination of heat pipes and thermo-electric generators. The aim is to improve power output by an appropriate design of the heat sink. The average geometrical parameters of heat sink (fin height, fin space and fin thickness) were obtained from data collected from previous studies closely similar to this prototype. The prototype was tested and the temperature, voltage and current data were collected. All data were recorded by using a temperature data recorder, power meter and multimeter. It was found that the highest maximum power output was 1.925 watts at a temperature difference of 85°C. However, the prototype did not achieve the maximum output expected. This was a result of limitation of TEG model (where only one TEG was used) and the limitation of the performance of the prototype. The prototype successfully generated enough power to charge a cell phone and laptop when connected to two or three TEGs. Moreover the heat pipe heat sink needs optimization to meet the design output from the manufacturer of the TEG at hot side temperature and cold side temperature.
format	Conference or Workshop Item
author	Elghool, Ali F., Basrawi Hassan, Ibrahim Thamir Khalil, Ibrahim
author_facet	Elghool, Ali F., Basrawi Hassan, Ibrahim Thamir Khalil, Ibrahim
author_sort	Elghool, Ali
title	Investigation on the performance of a prototype of thermo-electric generation with heat pipe-heat sink
title_short	Investigation on the performance of a prototype of thermo-electric generation with heat pipe-heat sink
title_full	Investigation on the performance of a prototype of thermo-electric generation with heat pipe-heat sink
title_fullStr	Investigation on the performance of a prototype of thermo-electric generation with heat pipe-heat sink
title_full_unstemmed	Investigation on the performance of a prototype of thermo-electric generation with heat pipe-heat sink
title_sort	investigation on the performance of a prototype of thermo-electric generation with heat pipe-heat sink
publisher	EDP Sciences
publishDate	2017
url	http://umpir.ump.edu.my/id/eprint/21085/ http://umpir.ump.edu.my/id/eprint/21085/ http://umpir.ump.edu.my/id/eprint/21085/1/Investigation%20on%20the%20performance%20of%20a%20prototype%20of%20thermo-electric%20generation%20with%20heat%20pipe-heat%20sink.pdf
first_indexed	2023-09-18T22:30:48Z
last_indexed	2023-09-18T22:30:48Z
_version_	1777416272040951808

Investigation on the performance of a prototype of thermo-electric generation with heat pipe-heat sink

Similar Items