Designing a new concept of LC-DCP broad type bone plate

Bone plate design has evolved dramatically in recent years. The main research of the study is to improve the previous design of the Dynamic Compression Plate (DCP) broad type bone plates that was used in bone fracture as internal fixation. The DCP bone plate has been superseded by new plating system...

Full description

Bibliographic Details
Main Author:	Muhammad Kamal Asyraf, Pubin
Format:	Undergraduates Project Papers
Language:	English
Published:	2007
Subjects:	RD Surgery
Online Access:	http://umpir.ump.edu.my/id/eprint/2325/ http://umpir.ump.edu.my/id/eprint/2325/ http://umpir.ump.edu.my/id/eprint/2325/1/MUHAMMAD_KAMAL_ASYRAF_BIN_PUBIN.PDF

id	ump-2325
recordtype	eprints
spelling	ump-23252015-03-03T07:55:56Z http://umpir.ump.edu.my/id/eprint/2325/ Designing a new concept of LC-DCP broad type bone plate Muhammad Kamal Asyraf, Pubin RD Surgery Bone plate design has evolved dramatically in recent years. The main research of the study is to improve the previous design of the Dynamic Compression Plate (DCP) broad type bone plates that was used in bone fracture as internal fixation. The DCP bone plate has been superseded by new plating system that claim a reduced interface contact between the plate and the underlying bone. It is believed that contact reduction can reduce the risk of Ischaemia - deficiency of blood in a part, usually due to functional constriction or actual obstruction of blood vessel that could lead to other side effect on the patient. To develop the new proposed design, CAD (Computer Aided Design) software is used to design and simulate the model. The interface characteristics of the actual Dynamic Compression Plate (DCP) and the new Low-Contact Dynamic Compression Plate (LC-DCP) plating systems have been analyzed using a Finite Element Analysis (FEA) software. The final result of model simulation is displayed in form of stress von Mises, and heat transfer distribution. The maximum value of von-Mises stress for the new LC-DCP is 768195.2 N/rn 2 and heat transfer distribution temperature is 57.15 °C. The LC-DCP system was consistently lower, in terms of interface contact, than the DCP in each of the CAD model tested. 2007-11 Undergraduates Project Papers NonPeerReviewed application/pdf en http://umpir.ump.edu.my/id/eprint/2325/1/MUHAMMAD_KAMAL_ASYRAF_BIN_PUBIN.PDF Muhammad Kamal Asyraf, Pubin (2007) Designing a new concept of LC-DCP broad type bone plate. Faculty of Mechanical Engineering, Universiti Malaysia Pahang. http://iportal.ump.edu.my/lib/item?id=chamo:30989&theme=UMP2
repository_type	Digital Repository
institution_category	Local University
institution	Universiti Malaysia Pahang
building	UMP Institutional Repository
collection	Online Access
language	English
topic	RD Surgery
spellingShingle	RD Surgery Muhammad Kamal Asyraf, Pubin Designing a new concept of LC-DCP broad type bone plate
description	Bone plate design has evolved dramatically in recent years. The main research of the study is to improve the previous design of the Dynamic Compression Plate (DCP) broad type bone plates that was used in bone fracture as internal fixation. The DCP bone plate has been superseded by new plating system that claim a reduced interface contact between the plate and the underlying bone. It is believed that contact reduction can reduce the risk of Ischaemia - deficiency of blood in a part, usually due to functional constriction or actual obstruction of blood vessel that could lead to other side effect on the patient. To develop the new proposed design, CAD (Computer Aided Design) software is used to design and simulate the model. The interface characteristics of the actual Dynamic Compression Plate (DCP) and the new Low-Contact Dynamic Compression Plate (LC-DCP) plating systems have been analyzed using a Finite Element Analysis (FEA) software. The final result of model simulation is displayed in form of stress von Mises, and heat transfer distribution. The maximum value of von-Mises stress for the new LC-DCP is 768195.2 N/rn 2 and heat transfer distribution temperature is 57.15 °C. The LC-DCP system was consistently lower, in terms of interface contact, than the DCP in each of the CAD model tested.
format	Undergraduates Project Papers
author	Muhammad Kamal Asyraf, Pubin
author_facet	Muhammad Kamal Asyraf, Pubin
author_sort	Muhammad Kamal Asyraf, Pubin
title	Designing a new concept of LC-DCP broad type bone plate
title_short	Designing a new concept of LC-DCP broad type bone plate
title_full	Designing a new concept of LC-DCP broad type bone plate
title_fullStr	Designing a new concept of LC-DCP broad type bone plate
title_full_unstemmed	Designing a new concept of LC-DCP broad type bone plate
title_sort	designing a new concept of lc-dcp broad type bone plate
publishDate	2007
url	http://umpir.ump.edu.my/id/eprint/2325/ http://umpir.ump.edu.my/id/eprint/2325/ http://umpir.ump.edu.my/id/eprint/2325/1/MUHAMMAD_KAMAL_ASYRAF_BIN_PUBIN.PDF
first_indexed	2023-09-18T21:56:01Z
last_indexed	2023-09-18T21:56:01Z
_version_	1777414084250042368

Designing a new concept of LC-DCP broad type bone plate

Similar Items