Evaluation of silane-based surfactant nanohybrid as flow improver in a Malaysian light crude oil
Paraffin deposition in the crude oil production pipeline has been an alarming problem to the flow assurance community. This phenomenon causes a tremendous amount of material loss in the production and substantial resources are expended to resolve these flow assurance problems—which included the chem...
| Main Authors: | , , , |
|---|---|
| Format: | Conference or Workshop Item |
| Language: | English |
| Published: |
Institute of Physics Publishing
2019
|
| Subjects: | |
| Online Access: | http://umpir.ump.edu.my/id/eprint/24546/ http://umpir.ump.edu.my/id/eprint/24546/ http://umpir.ump.edu.my/id/eprint/24546/1/Evaluation%20of%20silane-based%20surfactant%20nanohybrid%20as%20flow%20improver%20in%20a%20Malaysian%20light%20crude%20oil.pdf |
| Summary: | Paraffin deposition in the crude oil production pipeline has been an alarming problem to the flow assurance community. This phenomenon causes a tremendous amount of material loss in the production and substantial resources are expended to resolve these flow assurance problems—which included the chemical treatment. This study examined an agricultural non-ionic silane-based surfactant and its blends (with silica nanoparticles) as a flow improver using Malaysian light crude oil (42.4°API). In particular, this study performed the following experimental measurements: wax appearance temperature, pour point, viscosity, and FTIR spectroscopic analysis. The result showed that the surfactant-nanoparticles blend affected the viscosity (significant reduction by approximately 67 %) within certain temperature range and were able to depress both pour point (to 4°C) and wax appearance temperature (15.6°C). It was also revealed that the most potent blend consisted 400 ppm of silane-based surfactant and 200 ppm of SiO2 nanoparticles. The study also evaluated the underlying mechanisms for the variation of viscosity through FTIR spectroscopic analysis. |
|---|