Optimization of control parameters for SR in EDM injection flushing type on stainless steel 304 workpiece

The operating control parameters of injection flushing type of electrical discharge machining process on stainless steel 304 workpiece with copper tools are being optimized according to its individual machining characteristic i.e. surface roughness (SR). Higher SR during EDM machining process result...

Full description

Bibliographic Details
Main Authors:	Mohamed Reza Zalani, Mohamed Suffian, A. R., Yusoff, Muhammad Adib, Shaharun
Format:	Conference or Workshop Item
Language:	English
Published:	IOP Publishing 2012
Subjects:	TJ Mechanical engineering and machinery
Online Access:	http://umpir.ump.edu.my/id/eprint/25125/ http://umpir.ump.edu.my/id/eprint/25125/ http://umpir.ump.edu.my/id/eprint/25125/1/Optimization%20of%20control%20parameters%20for%20SR%20in%20EDM%20injection%20flushing%20type.pdf

id	ump-25125
recordtype	eprints
spelling	ump-251252019-11-08T01:28:00Z http://umpir.ump.edu.my/id/eprint/25125/ Optimization of control parameters for SR in EDM injection flushing type on stainless steel 304 workpiece Mohamed Reza Zalani, Mohamed Suffian A. R., Yusoff Muhammad Adib, Shaharun TJ Mechanical engineering and machinery The operating control parameters of injection flushing type of electrical discharge machining process on stainless steel 304 workpiece with copper tools are being optimized according to its individual machining characteristic i.e. surface roughness (SR). Higher SR during EDM machining process results for poor surface integrity of the workpiece. Hence, the quality characteristic for SR is set to lower-the-better to achieve the optimum surface integrity. Taguchi method has been used for the construction, layout and analysis of the experiment for each of the machining characteristic for the SR. The use of Taguchi method in the experiment saves a lot of time and cost of machining the experiment samples. Therefore, an L18 Orthogonal array which was the fundamental component in the statistical design of experiments has been used to plan the experiments and Analysis of Variance (ANOVA) is used to determine the optimum machining parameters for this machining characteristic. The control parameters selected for this optimization experiments are polarity, pulse on duration, discharge current, discharge voltage, machining depth, machining diameter and dielectric liquid pressure. The result had shown that the lower the machining diameter, the lower will be the SR. IOP Publishing 2012 Conference or Workshop Item PeerReviewed pdf en http://umpir.ump.edu.my/id/eprint/25125/1/Optimization%20of%20control%20parameters%20for%20SR%20in%20EDM%20injection%20flushing%20type.pdf Mohamed Reza Zalani, Mohamed Suffian and A. R., Yusoff and Muhammad Adib, Shaharun (2012) Optimization of control parameters for SR in EDM injection flushing type on stainless steel 304 workpiece. In: 1st International Conference on Mechanical Engineering Research 2011, ICMER 2011, 5-7 Disember 2011 , Kuantan, Pahang Darul Makmur. pp. 1-7., 36 (012044). ISSN 1757-899X https://doi.org/10.1088/1757-899X/36/1/012044
repository_type	Digital Repository
institution_category	Local University
institution	Universiti Malaysia Pahang
building	UMP Institutional Repository
collection	Online Access
language	English
topic	TJ Mechanical engineering and machinery
spellingShingle	TJ Mechanical engineering and machinery Mohamed Reza Zalani, Mohamed Suffian A. R., Yusoff Muhammad Adib, Shaharun Optimization of control parameters for SR in EDM injection flushing type on stainless steel 304 workpiece
description	The operating control parameters of injection flushing type of electrical discharge machining process on stainless steel 304 workpiece with copper tools are being optimized according to its individual machining characteristic i.e. surface roughness (SR). Higher SR during EDM machining process results for poor surface integrity of the workpiece. Hence, the quality characteristic for SR is set to lower-the-better to achieve the optimum surface integrity. Taguchi method has been used for the construction, layout and analysis of the experiment for each of the machining characteristic for the SR. The use of Taguchi method in the experiment saves a lot of time and cost of machining the experiment samples. Therefore, an L18 Orthogonal array which was the fundamental component in the statistical design of experiments has been used to plan the experiments and Analysis of Variance (ANOVA) is used to determine the optimum machining parameters for this machining characteristic. The control parameters selected for this optimization experiments are polarity, pulse on duration, discharge current, discharge voltage, machining depth, machining diameter and dielectric liquid pressure. The result had shown that the lower the machining diameter, the lower will be the SR.
format	Conference or Workshop Item
author	Mohamed Reza Zalani, Mohamed Suffian A. R., Yusoff Muhammad Adib, Shaharun
author_facet	Mohamed Reza Zalani, Mohamed Suffian A. R., Yusoff Muhammad Adib, Shaharun
author_sort	Mohamed Reza Zalani, Mohamed Suffian
title	Optimization of control parameters for SR in EDM injection flushing type on stainless steel 304 workpiece
title_short	Optimization of control parameters for SR in EDM injection flushing type on stainless steel 304 workpiece
title_full	Optimization of control parameters for SR in EDM injection flushing type on stainless steel 304 workpiece
title_fullStr	Optimization of control parameters for SR in EDM injection flushing type on stainless steel 304 workpiece
title_full_unstemmed	Optimization of control parameters for SR in EDM injection flushing type on stainless steel 304 workpiece
title_sort	optimization of control parameters for sr in edm injection flushing type on stainless steel 304 workpiece
publisher	IOP Publishing
publishDate	2012
url	http://umpir.ump.edu.my/id/eprint/25125/ http://umpir.ump.edu.my/id/eprint/25125/ http://umpir.ump.edu.my/id/eprint/25125/1/Optimization%20of%20control%20parameters%20for%20SR%20in%20EDM%20injection%20flushing%20type.pdf
first_indexed	2023-09-18T22:38:25Z
last_indexed	2023-09-18T22:38:25Z
_version_	1777416751404810240

Optimization of control parameters for SR in EDM injection flushing type on stainless steel 304 workpiece

Similar Items