Experimental study of properties for sand brick with palm oil clinker as partial replacement for fine aggregate with ratio of 5%, 10% and 15%

In Malaysia, the palm oil industry produces millions of tonnes of industrial wastes and these wastes create huge storage and environmental problems. Thus, experimental work has been conducted in order to investigate the effectiveness of palm oil clinker (POC), a by-product from palm oil industry as...

Full description

Bibliographic Details
Main Author:	Nur Syuhada, Hashim
Format:	Undergraduates Project Papers
Language:	English
Published:	2018
Subjects:	TA Engineering (General). Civil engineering (General)
Online Access:	http://umpir.ump.edu.my/id/eprint/26177/ http://umpir.ump.edu.my/id/eprint/26177/ http://umpir.ump.edu.my/id/eprint/26177/1/Experimental%20study%20of%20properties%20for%20sand%20brick%20with%20palm%20oil%20clinker.pdf

id	ump-26177
recordtype	eprints
spelling	ump-261772019-10-23T08:42:50Z http://umpir.ump.edu.my/id/eprint/26177/ Experimental study of properties for sand brick with palm oil clinker as partial replacement for fine aggregate with ratio of 5%, 10% and 15% Nur Syuhada, Hashim TA Engineering (General). Civil engineering (General) In Malaysia, the palm oil industry produces millions of tonnes of industrial wastes and these wastes create huge storage and environmental problems. Thus, experimental work has been conducted in order to investigate the effectiveness of palm oil clinker (POC), a by-product from palm oil industry as partial replacement for fine aggregate in the properties of sand brick. The four types of samples with different percentages of palm oil clinker which are 0%, 5%, 10% and 15% had been prepared. In this study, there were two types of curing which are water curing and air curing and all specimens were cured for the 3, 7, 14 and 28 days. Different mechanical properties were studies including compressive strength, flexural strength, density and water absorption. The sand brick with POC replacement then were compared with normal sand brick. The result of this study indicates that replacement with 15% of palm oil clinker was the best compression strength, flexural strength, density and water absorption. The density and water absorption of the sand brick were increase slightly when the palm oil clinker used as partial replacement. On overall, the study indicates that POC can be used as partial replacement for fine aggregate in the production of sand brick and also can be used for non load bearing application. It also noted that the using of palm oil clinker in the production of sand brick can manage the waste and promote the environmental sustainability. 2018-06 Undergraduates Project Papers NonPeerReviewed pdf en http://umpir.ump.edu.my/id/eprint/26177/1/Experimental%20study%20of%20properties%20for%20sand%20brick%20with%20palm%20oil%20clinker.pdf Nur Syuhada, Hashim (2018) Experimental study of properties for sand brick with palm oil clinker as partial replacement for fine aggregate with ratio of 5%, 10% and 15%. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang. https://efind.ump.edu.my/cgi-bin/koha/opac-detail.pl?biblionumber=7996
repository_type	Digital Repository
institution_category	Local University
institution	Universiti Malaysia Pahang
building	UMP Institutional Repository
collection	Online Access
language	English
topic	TA Engineering (General). Civil engineering (General)
spellingShingle	TA Engineering (General). Civil engineering (General) Nur Syuhada, Hashim Experimental study of properties for sand brick with palm oil clinker as partial replacement for fine aggregate with ratio of 5%, 10% and 15%
description	In Malaysia, the palm oil industry produces millions of tonnes of industrial wastes and these wastes create huge storage and environmental problems. Thus, experimental work has been conducted in order to investigate the effectiveness of palm oil clinker (POC), a by-product from palm oil industry as partial replacement for fine aggregate in the properties of sand brick. The four types of samples with different percentages of palm oil clinker which are 0%, 5%, 10% and 15% had been prepared. In this study, there were two types of curing which are water curing and air curing and all specimens were cured for the 3, 7, 14 and 28 days. Different mechanical properties were studies including compressive strength, flexural strength, density and water absorption. The sand brick with POC replacement then were compared with normal sand brick. The result of this study indicates that replacement with 15% of palm oil clinker was the best compression strength, flexural strength, density and water absorption. The density and water absorption of the sand brick were increase slightly when the palm oil clinker used as partial replacement. On overall, the study indicates that POC can be used as partial replacement for fine aggregate in the production of sand brick and also can be used for non load bearing application. It also noted that the using of palm oil clinker in the production of sand brick can manage the waste and promote the environmental sustainability.
format	Undergraduates Project Papers
author	Nur Syuhada, Hashim
author_facet	Nur Syuhada, Hashim
author_sort	Nur Syuhada, Hashim
title	Experimental study of properties for sand brick with palm oil clinker as partial replacement for fine aggregate with ratio of 5%, 10% and 15%
title_short	Experimental study of properties for sand brick with palm oil clinker as partial replacement for fine aggregate with ratio of 5%, 10% and 15%
title_full	Experimental study of properties for sand brick with palm oil clinker as partial replacement for fine aggregate with ratio of 5%, 10% and 15%
title_fullStr	Experimental study of properties for sand brick with palm oil clinker as partial replacement for fine aggregate with ratio of 5%, 10% and 15%
title_full_unstemmed	Experimental study of properties for sand brick with palm oil clinker as partial replacement for fine aggregate with ratio of 5%, 10% and 15%
title_sort	experimental study of properties for sand brick with palm oil clinker as partial replacement for fine aggregate with ratio of 5%, 10% and 15%
publishDate	2018
url	http://umpir.ump.edu.my/id/eprint/26177/ http://umpir.ump.edu.my/id/eprint/26177/ http://umpir.ump.edu.my/id/eprint/26177/1/Experimental%20study%20of%20properties%20for%20sand%20brick%20with%20palm%20oil%20clinker.pdf
first_indexed	2023-09-18T22:40:36Z
last_indexed	2023-09-18T22:40:36Z
_version_	1777416888934989824

Experimental study of properties for sand brick with palm oil clinker as partial replacement for fine aggregate with ratio of 5%, 10% and 15%

Similar Items