Experimental study of properties for sand brick with palm oil clinker as a partial replacement for fine aggregate with ratio 7.5%, 12.5% and 17.5%

Research has diverged from the production of sand brick to the utilization of abundantly available waste materials as aggregate replacement by using palm oil clinker (POC). This report presents experimental results on properties of sand brick made of palm oil clinker (POC). POC is a by-product of pa...

Full description

Bibliographic Details
Main Author:	Nur Afifah Adilah, Yaakob
Format:	Undergraduates Project Papers
Language:	English
Published:	2018
Subjects:	TA Engineering (General). Civil engineering (General)
Online Access:	http://umpir.ump.edu.my/id/eprint/27674/ http://umpir.ump.edu.my/id/eprint/27674/ http://umpir.ump.edu.my/id/eprint/27674/1/Experimental%20study%20of%20properties%20for%20sand%20brick%20with%20palm%20oil%20clinker%20as%20a%20partial%20replacement.pdf

id	ump-27674
recordtype	eprints
spelling	ump-276742020-02-03T08:00:00Z http://umpir.ump.edu.my/id/eprint/27674/ Experimental study of properties for sand brick with palm oil clinker as a partial replacement for fine aggregate with ratio 7.5%, 12.5% and 17.5% Nur Afifah Adilah, Yaakob TA Engineering (General). Civil engineering (General) Research has diverged from the production of sand brick to the utilization of abundantly available waste materials as aggregate replacement by using palm oil clinker (POC). This report presents experimental results on properties of sand brick made of palm oil clinker (POC). POC is a by-product of palm oil industry and its utilization in sand brick production not only solves the problem of disposing this solid waste but also helps to conserve natural resources. POC were incorporated as a replacement material for fines aggregate. The ratios of POC that have been used are 7.5%, 12.5% and 17.5% by using two method of curing which are air and water curing at four different age of curing which are 3, 7, 14 and 28 days have been prepared. The compressive strength test and flexural strength test was conducted at 3,7,14 and 28 days. Whereas, for density and water absorption would be test at 28 days. The results shows that the best ratio of POC is 12.5% for both air and water which enhances both compressive strength and flexural strength performance of the brick. The density and water absorption of the brick increases slightly when increasing the ratio of POC. This study is also expected to offer some guides and directions for upcoming research works on the incorporation of POC. 2018-06 Undergraduates Project Papers NonPeerReviewed pdf en http://umpir.ump.edu.my/id/eprint/27674/1/Experimental%20study%20of%20properties%20for%20sand%20brick%20with%20palm%20oil%20clinker%20as%20a%20partial%20replacement.pdf Nur Afifah Adilah, Yaakob (2018) Experimental study of properties for sand brick with palm oil clinker as a partial replacement for fine aggregate with ratio 7.5%, 12.5% and 17.5%. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang. https://efind.ump.edu.my/cgi-bin/koha/opac-detail.pl?biblionumber=90949
repository_type	Digital Repository
institution_category	Local University
institution	Universiti Malaysia Pahang
building	UMP Institutional Repository
collection	Online Access
language	English
topic	TA Engineering (General). Civil engineering (General)
spellingShingle	TA Engineering (General). Civil engineering (General) Nur Afifah Adilah, Yaakob Experimental study of properties for sand brick with palm oil clinker as a partial replacement for fine aggregate with ratio 7.5%, 12.5% and 17.5%
description	Research has diverged from the production of sand brick to the utilization of abundantly available waste materials as aggregate replacement by using palm oil clinker (POC). This report presents experimental results on properties of sand brick made of palm oil clinker (POC). POC is a by-product of palm oil industry and its utilization in sand brick production not only solves the problem of disposing this solid waste but also helps to conserve natural resources. POC were incorporated as a replacement material for fines aggregate. The ratios of POC that have been used are 7.5%, 12.5% and 17.5% by using two method of curing which are air and water curing at four different age of curing which are 3, 7, 14 and 28 days have been prepared. The compressive strength test and flexural strength test was conducted at 3,7,14 and 28 days. Whereas, for density and water absorption would be test at 28 days. The results shows that the best ratio of POC is 12.5% for both air and water which enhances both compressive strength and flexural strength performance of the brick. The density and water absorption of the brick increases slightly when increasing the ratio of POC. This study is also expected to offer some guides and directions for upcoming research works on the incorporation of POC.
format	Undergraduates Project Papers
author	Nur Afifah Adilah, Yaakob
author_facet	Nur Afifah Adilah, Yaakob
author_sort	Nur Afifah Adilah, Yaakob
title	Experimental study of properties for sand brick with palm oil clinker as a partial replacement for fine aggregate with ratio 7.5%, 12.5% and 17.5%
title_short	Experimental study of properties for sand brick with palm oil clinker as a partial replacement for fine aggregate with ratio 7.5%, 12.5% and 17.5%
title_full	Experimental study of properties for sand brick with palm oil clinker as a partial replacement for fine aggregate with ratio 7.5%, 12.5% and 17.5%
title_fullStr	Experimental study of properties for sand brick with palm oil clinker as a partial replacement for fine aggregate with ratio 7.5%, 12.5% and 17.5%
title_full_unstemmed	Experimental study of properties for sand brick with palm oil clinker as a partial replacement for fine aggregate with ratio 7.5%, 12.5% and 17.5%
title_sort	experimental study of properties for sand brick with palm oil clinker as a partial replacement for fine aggregate with ratio 7.5%, 12.5% and 17.5%
publishDate	2018
url	http://umpir.ump.edu.my/id/eprint/27674/ http://umpir.ump.edu.my/id/eprint/27674/ http://umpir.ump.edu.my/id/eprint/27674/1/Experimental%20study%20of%20properties%20for%20sand%20brick%20with%20palm%20oil%20clinker%20as%20a%20partial%20replacement.pdf
first_indexed	2023-09-18T22:43:29Z
last_indexed	2023-09-18T22:43:29Z
_version_	1777417070666842112

Experimental study of properties for sand brick with palm oil clinker as a partial replacement for fine aggregate with ratio 7.5%, 12.5% and 17.5%

Similar Items