A real-time simulation platform for maximum power point tracking algorithm study in solar photovoltaic system
This paper presents the application of controller hardware-in-the-loop (C-HIL) for real-time study of maximum power point tracking (MPPT) algorithm in solar photovoltaic (PV) system. The testing platform in this study which consist of three series connected PV modules together with a DC/DC boost con...
| Main Authors: | , , , , |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
Arqii Publication
2019
|
| Subjects: | |
| Online Access: | http://umpir.ump.edu.my/id/eprint/27786/ http://umpir.ump.edu.my/id/eprint/27786/ http://umpir.ump.edu.my/id/eprint/27786/1/AMS%2070-382-1-PB%20TMC.pdf |
| Summary: | This paper presents the application of controller hardware-in-the-loop (C-HIL) for real-time study of maximum power point tracking (MPPT) algorithm in solar photovoltaic (PV) system. The testing platform in this study which consist of three series connected PV modules together with a DC/DC boost converter were modelled and implemented using Tyhoon HIL-402. For the MPPT controller, a conventional perturb and observe (P&O) and a well-established particle swarm optimization (PSO) based MPPT algorithm are developed and implemented in a digital signal processor. The performance of both algorithms were examined under real-time working condition with 10 different partial shaded test cases. From the study, the P&O shows a faster convergence speed which it can track for maximum power point rapidly up to 0.5070 s compared to the fastest tracking of PSO at 1.3598 s. However, PSO shows a greater capability in tracking for true maximum power point under partial shaded conditions with average output efficiency up to 99.92% compared to P&O which is only 76.76%. |
|---|