Degradation of lead (Pb) from car wash waste water sample using ultrasonic assisted extraction process

The waste water from the car wash industry is actually containing heavy metals that will affect environment and health. Many researchers have done different ways to degrade heavy metal in the different sources of waste water. In this study, lead (Pb) is the major heavy metal found from the car wash...

Full description

Bibliographic Details
Main Author: Noorhidayah, Khamis
Format: Undergraduates Project Papers
Language:English
Published: 2010
Subjects:
Online Access:http://umpir.ump.edu.my/id/eprint/3365/
http://umpir.ump.edu.my/id/eprint/3365/
http://umpir.ump.edu.my/id/eprint/3365/1/CD5677_NORHIDAYAH_KHAMIS.pdf
id ump-3365
recordtype eprints
spelling ump-33652015-03-03T08:00:45Z http://umpir.ump.edu.my/id/eprint/3365/ Degradation of lead (Pb) from car wash waste water sample using ultrasonic assisted extraction process Noorhidayah, Khamis TP Chemical technology The waste water from the car wash industry is actually containing heavy metals that will affect environment and health. Many researchers have done different ways to degrade heavy metal in the different sources of waste water. In this study, lead (Pb) is the major heavy metal found from the car wash effluent sample. The degradations of this heavy metal use the ultrasonic process which is assisted by the extracting solvent for get higher degradation. Then, the aim of this study was to find the suitable condition of degradation lead (Pb) from car wash waste water with focused on the influence of time sonication, volume solvent and type of the solvents used. Two types of solvent are used in this research which are methanol and acid hydrochloric. Each solvent was mixed with the sample with different volume also the time process. The two condition of treatment was done; by present and absent of ultrasonic treatment. The analysis of sample was using Atomic Absorption Spectrophotometry (AAS) to identify the final lead (Pb) concentration. Result found that the suitable conditions for lead (Pb) degradation were using 3 minutes ultrasonic process and assisted with methanol (MeOH) solvent by the volume 10ml. It was shown that, the higher percentage degradation was achieved by 42.5%. In conclusion, Ultrasound alone was not good enough to degrade the heavy metal itself in waste sample and by an addition of solvent, it was played a role as predominated over that of ultrasonic process enhanced the result performance. The standard condition of process was important to recognize for further commercialized programs. 2010-12 Undergraduates Project Papers NonPeerReviewed application/pdf en http://umpir.ump.edu.my/id/eprint/3365/1/CD5677_NORHIDAYAH_KHAMIS.pdf Noorhidayah, Khamis (2010) Degradation of lead (Pb) from car wash waste water sample using ultrasonic assisted extraction process. Faculty of Chemical and Natural Resources Engineering , Universiti Malaysia Pahang . http://iportal.ump.edu.my/lib/item?id=chamo:57544&theme=UMP2
repository_type Digital Repository
institution_category Local University
institution Universiti Malaysia Pahang
building UMP Institutional Repository
collection Online Access
language English
topic TP Chemical technology
spellingShingle TP Chemical technology
Noorhidayah, Khamis
Degradation of lead (Pb) from car wash waste water sample using ultrasonic assisted extraction process
description The waste water from the car wash industry is actually containing heavy metals that will affect environment and health. Many researchers have done different ways to degrade heavy metal in the different sources of waste water. In this study, lead (Pb) is the major heavy metal found from the car wash effluent sample. The degradations of this heavy metal use the ultrasonic process which is assisted by the extracting solvent for get higher degradation. Then, the aim of this study was to find the suitable condition of degradation lead (Pb) from car wash waste water with focused on the influence of time sonication, volume solvent and type of the solvents used. Two types of solvent are used in this research which are methanol and acid hydrochloric. Each solvent was mixed with the sample with different volume also the time process. The two condition of treatment was done; by present and absent of ultrasonic treatment. The analysis of sample was using Atomic Absorption Spectrophotometry (AAS) to identify the final lead (Pb) concentration. Result found that the suitable conditions for lead (Pb) degradation were using 3 minutes ultrasonic process and assisted with methanol (MeOH) solvent by the volume 10ml. It was shown that, the higher percentage degradation was achieved by 42.5%. In conclusion, Ultrasound alone was not good enough to degrade the heavy metal itself in waste sample and by an addition of solvent, it was played a role as predominated over that of ultrasonic process enhanced the result performance. The standard condition of process was important to recognize for further commercialized programs.
format Undergraduates Project Papers
author Noorhidayah, Khamis
author_facet Noorhidayah, Khamis
author_sort Noorhidayah, Khamis
title Degradation of lead (Pb) from car wash waste water sample using ultrasonic assisted extraction process
title_short Degradation of lead (Pb) from car wash waste water sample using ultrasonic assisted extraction process
title_full Degradation of lead (Pb) from car wash waste water sample using ultrasonic assisted extraction process
title_fullStr Degradation of lead (Pb) from car wash waste water sample using ultrasonic assisted extraction process
title_full_unstemmed Degradation of lead (Pb) from car wash waste water sample using ultrasonic assisted extraction process
title_sort degradation of lead (pb) from car wash waste water sample using ultrasonic assisted extraction process
publishDate 2010
url http://umpir.ump.edu.my/id/eprint/3365/
http://umpir.ump.edu.my/id/eprint/3365/
http://umpir.ump.edu.my/id/eprint/3365/1/CD5677_NORHIDAYAH_KHAMIS.pdf
first_indexed 2023-09-18T21:57:36Z
last_indexed 2023-09-18T21:57:36Z
_version_ 1777414183312162816