Failure analysis on the drillpipe due to the twist-off

This thesis reports on the design and analysis for failure at three different drill pipes. When drilling boreholes, for example in the Oil & Gas industry, a hole is drilled into the ground which can be several kilometers long. One of main type of problem that can occur while drilling is the torq...

Full description

Bibliographic Details
Main Author: Mohd Iqbal, Mohd Zolkepeli
Format: Undergraduates Project Papers
Language:English
English
Published: 2008
Subjects:
Online Access:http://umpir.ump.edu.my/id/eprint/344/
http://umpir.ump.edu.my/id/eprint/344/
http://umpir.ump.edu.my/id/eprint/344/1/
http://umpir.ump.edu.my/id/eprint/344/2/Mohd.Iqbal_Mohd._Zolkepeli.pdf
id ump-344
recordtype eprints
spelling ump-3442015-03-03T06:16:39Z http://umpir.ump.edu.my/id/eprint/344/ Failure analysis on the drillpipe due to the twist-off Mohd Iqbal, Mohd Zolkepeli TJ Mechanical engineering and machinery This thesis reports on the design and analysis for failure at three different drill pipes. When drilling boreholes, for example in the Oil & Gas industry, a hole is drilled into the ground which can be several kilometers long. One of main type of problem that can occur while drilling is the torque on the drill pipe can cause it to break (called twist-off). This problem results in drilling delays. Twist-offs also usually results in loss of expensive equipment. Therefore, ALGOR software has been use as the FEA tool to do the analysis to reduce this problem. Six different values of torque range from 2000 N.m to 3000 N.m is applied to the end of the pipe stand which is consist of three assembly of pipes. The materials of the pipe have been chosen are AISI 1010, ASTM A36 and AISI 4150 steels that have different mechanical properties the see the differences. The test results show that AISI 4150 is the most suitable material to use which gives 2800 N.m torque value before it starts to fail. Meanwhile, a constant pattern of failure has determined for these three pipes at the same location of the second engaged thread of the pipe assembly, between the male and female thread at the joint. For improvement, to see the differences from another point of view, the analysis for this drill pipe design is suggested to do with different thickness and length in order to analyze how much the maximum allowable torque value can be applied to the pipe before it starts to fail. 2008-11 Undergraduates Project Papers NonPeerReviewed application/pdf en http://umpir.ump.edu.my/id/eprint/344/1/ application/pdf en http://umpir.ump.edu.my/id/eprint/344/2/Mohd.Iqbal_Mohd._Zolkepeli.pdf Mohd Iqbal, Mohd Zolkepeli (2008) Failure analysis on the drillpipe due to the twist-off. Faculty of Mechanical Engineering, Universiti Malaysia Pahang. http://iportal.ump.edu.my/lib/item?id=chamo:40748&theme=UMP2
repository_type Digital Repository
institution_category Local University
institution Universiti Malaysia Pahang
building UMP Institutional Repository
collection Online Access
language English
English
topic TJ Mechanical engineering and machinery
spellingShingle TJ Mechanical engineering and machinery
Mohd Iqbal, Mohd Zolkepeli
Failure analysis on the drillpipe due to the twist-off
description This thesis reports on the design and analysis for failure at three different drill pipes. When drilling boreholes, for example in the Oil & Gas industry, a hole is drilled into the ground which can be several kilometers long. One of main type of problem that can occur while drilling is the torque on the drill pipe can cause it to break (called twist-off). This problem results in drilling delays. Twist-offs also usually results in loss of expensive equipment. Therefore, ALGOR software has been use as the FEA tool to do the analysis to reduce this problem. Six different values of torque range from 2000 N.m to 3000 N.m is applied to the end of the pipe stand which is consist of three assembly of pipes. The materials of the pipe have been chosen are AISI 1010, ASTM A36 and AISI 4150 steels that have different mechanical properties the see the differences. The test results show that AISI 4150 is the most suitable material to use which gives 2800 N.m torque value before it starts to fail. Meanwhile, a constant pattern of failure has determined for these three pipes at the same location of the second engaged thread of the pipe assembly, between the male and female thread at the joint. For improvement, to see the differences from another point of view, the analysis for this drill pipe design is suggested to do with different thickness and length in order to analyze how much the maximum allowable torque value can be applied to the pipe before it starts to fail.
format Undergraduates Project Papers
author Mohd Iqbal, Mohd Zolkepeli
author_facet Mohd Iqbal, Mohd Zolkepeli
author_sort Mohd Iqbal, Mohd Zolkepeli
title Failure analysis on the drillpipe due to the twist-off
title_short Failure analysis on the drillpipe due to the twist-off
title_full Failure analysis on the drillpipe due to the twist-off
title_fullStr Failure analysis on the drillpipe due to the twist-off
title_full_unstemmed Failure analysis on the drillpipe due to the twist-off
title_sort failure analysis on the drillpipe due to the twist-off
publishDate 2008
url http://umpir.ump.edu.my/id/eprint/344/
http://umpir.ump.edu.my/id/eprint/344/
http://umpir.ump.edu.my/id/eprint/344/1/
http://umpir.ump.edu.my/id/eprint/344/2/Mohd.Iqbal_Mohd._Zolkepeli.pdf
first_indexed 2023-09-18T21:52:26Z
last_indexed 2023-09-18T21:52:26Z
_version_ 1777413858864922624