Augmentation of Turbulent Flow Heat Transfer in A Horizontal Tube with Varying Width Twisted Tape Inserts

The present work shows the results obtained from experimental investigations of the augmentation of turbulent flow heat transfer in a horizontal tube by means of varying width twisted tape inserts, with air as the working fluid. In order to reduce excessive pressure drops associated with full-width...

Full description

Bibliographic Details
Main Authors: Sarad, S. Naga, Raju, A.V. Sita Rama, Radha, K. Kalyani, Sunder, L. Syam
Format: Article
Language:English
Published: Universiti Malaysia Pahang 2012
Subjects:
Online Access:http://umpir.ump.edu.my/id/eprint/3505/
http://umpir.ump.edu.my/id/eprint/3505/
http://umpir.ump.edu.my/id/eprint/3505/1/11_Naga_Sarada_et_al.pdf
id ump-3505
recordtype eprints
spelling ump-35052015-03-03T08:01:36Z http://umpir.ump.edu.my/id/eprint/3505/ Augmentation of Turbulent Flow Heat Transfer in A Horizontal Tube with Varying Width Twisted Tape Inserts Sarad, S. Naga Raju, A.V. Sita Rama Radha, K. Kalyani Sunder, L. Syam TJ Mechanical engineering and machinery The present work shows the results obtained from experimental investigations of the augmentation of turbulent flow heat transfer in a horizontal tube by means of varying width twisted tape inserts, with air as the working fluid. In order to reduce excessive pressure drops associated with full-width twisted tape inserts, with a lower corresponding reduction in heat transfer coefficients, reduced-width twisted tapes of widths ranging from 10 mm to 22 mm are used, which are lower than the internal diameter of the tube of 27.5 mm. Experiments were carried out for plain tubes with/without twisted tape inserts at a constant wall heat flux and different mass flow rates. The twisted tapes are of three different twist ratios (3, 4 and 5), each with five different widths (26 (full-width), 22, 18, 14 and 10 mm). The Reynolds number varied from 6000 to 13500. Both the heat transfer coefficient and pressure drop are calculated, and the results are compared with those of a plain tube. It is observed that with the inclusion of twisted tape inserts there is a significant increase in the heat transfer coefficients. Correlations are developed for friction factors and Nusselt numbers for a fully-developed turbulent swirl flow, which are applicable to full-width as well as reduced-width twisted tapes, using a modified twist ratio as the pitch to width ratio of the tape. Universiti Malaysia Pahang 2012 Article PeerReviewed application/pdf en http://umpir.ump.edu.my/id/eprint/3505/1/11_Naga_Sarada_et_al.pdf Sarad, S. Naga and Raju, A.V. Sita Rama and Radha, K. Kalyani and Sunder, L. Syam (2012) Augmentation of Turbulent Flow Heat Transfer in A Horizontal Tube with Varying Width Twisted Tape Inserts. International Journal of Automotive and Mechanical Engineering (IJAME), 6 (Jul. pp. 797-810. ISSN 2229-8649 (Print); 2180-1606 (Online) http://ijame.ump.edu.my/images/Volume%206/11%20Naga%20Sarada%20et%20al.pdf
repository_type Digital Repository
institution_category Local University
institution Universiti Malaysia Pahang
building UMP Institutional Repository
collection Online Access
language English
topic TJ Mechanical engineering and machinery
spellingShingle TJ Mechanical engineering and machinery
Sarad, S. Naga
Raju, A.V. Sita Rama
Radha, K. Kalyani
Sunder, L. Syam
Augmentation of Turbulent Flow Heat Transfer in A Horizontal Tube with Varying Width Twisted Tape Inserts
description The present work shows the results obtained from experimental investigations of the augmentation of turbulent flow heat transfer in a horizontal tube by means of varying width twisted tape inserts, with air as the working fluid. In order to reduce excessive pressure drops associated with full-width twisted tape inserts, with a lower corresponding reduction in heat transfer coefficients, reduced-width twisted tapes of widths ranging from 10 mm to 22 mm are used, which are lower than the internal diameter of the tube of 27.5 mm. Experiments were carried out for plain tubes with/without twisted tape inserts at a constant wall heat flux and different mass flow rates. The twisted tapes are of three different twist ratios (3, 4 and 5), each with five different widths (26 (full-width), 22, 18, 14 and 10 mm). The Reynolds number varied from 6000 to 13500. Both the heat transfer coefficient and pressure drop are calculated, and the results are compared with those of a plain tube. It is observed that with the inclusion of twisted tape inserts there is a significant increase in the heat transfer coefficients. Correlations are developed for friction factors and Nusselt numbers for a fully-developed turbulent swirl flow, which are applicable to full-width as well as reduced-width twisted tapes, using a modified twist ratio as the pitch to width ratio of the tape.
format Article
author Sarad, S. Naga
Raju, A.V. Sita Rama
Radha, K. Kalyani
Sunder, L. Syam
author_facet Sarad, S. Naga
Raju, A.V. Sita Rama
Radha, K. Kalyani
Sunder, L. Syam
author_sort Sarad, S. Naga
title Augmentation of Turbulent Flow Heat Transfer in A Horizontal Tube with Varying Width Twisted Tape Inserts
title_short Augmentation of Turbulent Flow Heat Transfer in A Horizontal Tube with Varying Width Twisted Tape Inserts
title_full Augmentation of Turbulent Flow Heat Transfer in A Horizontal Tube with Varying Width Twisted Tape Inserts
title_fullStr Augmentation of Turbulent Flow Heat Transfer in A Horizontal Tube with Varying Width Twisted Tape Inserts
title_full_unstemmed Augmentation of Turbulent Flow Heat Transfer in A Horizontal Tube with Varying Width Twisted Tape Inserts
title_sort augmentation of turbulent flow heat transfer in a horizontal tube with varying width twisted tape inserts
publisher Universiti Malaysia Pahang
publishDate 2012
url http://umpir.ump.edu.my/id/eprint/3505/
http://umpir.ump.edu.my/id/eprint/3505/
http://umpir.ump.edu.my/id/eprint/3505/1/11_Naga_Sarada_et_al.pdf
first_indexed 2023-09-18T21:57:53Z
last_indexed 2023-09-18T21:57:53Z
_version_ 1777414201123274752