Development of High Power LED Driver Using LTSpice Software

LED technology has been used widely in various applications due to its advantage in term of functionality, high efficiency, low cost, small size and high reliability. In order to improve LED performance and prolong LED’s life, High Power LED driver is been developed. LED driver is used to co...

Full description

Bibliographic Details
Main Authors: Muhammad Ikram, Mohd Rashid, Suliana, Abd Ghani, Mohamad Fakhrudin, Sulaiman Mustahim
Format: Conference or Workshop Item
Language:English
Published: 2013
Subjects:
Online Access:http://umpir.ump.edu.my/id/eprint/3793/
http://umpir.ump.edu.my/id/eprint/3793/1/PID2782493.pdf
id ump-3793
recordtype eprints
spelling ump-37932017-09-08T02:39:42Z http://umpir.ump.edu.my/id/eprint/3793/ Development of High Power LED Driver Using LTSpice Software Muhammad Ikram, Mohd Rashid Suliana, Abd Ghani Mohamad Fakhrudin, Sulaiman Mustahim TK Electrical engineering. Electronics Nuclear engineering LED technology has been used widely in various applications due to its advantage in term of functionality, high efficiency, low cost, small size and high reliability. In order to improve LED performance and prolong LED’s life, High Power LED driver is been developed. LED driver is used to control output voltage by using current mode controlled method. This development of LED driver can increase the LED operation efficiency, provide high voltage protection, decreases the driver size and lastly make possible of user friendly installation. Voltage source is step up by using boost converter as main circuit. In control circuit, current mode controlled is used to regulate output characteristic of High Power LED. LTC 3783 is used as PWM controller to drive the gate and provide pulse signal to the MOSFET. This driver is designed to operate load that consists of 6 units LED each rating of 5 Watt connected in series. Theoretical calculation is made to obtain component specification. The LTspice software is used to simulate the driver circuit by using calculated parameters before move on to hardware implementation. Eagle software is used to design the Printed Circuit Board (PCB). Then, all components are mounted on the PCB which is made of FR4 material. The hardware built is tested experimentally and the output waveform is recorded. 2013 Conference or Workshop Item PeerReviewed application/pdf en http://umpir.ump.edu.my/id/eprint/3793/1/PID2782493.pdf Muhammad Ikram, Mohd Rashid and Suliana, Abd Ghani and Mohamad Fakhrudin, Sulaiman Mustahim (2013) Development of High Power LED Driver Using LTSpice Software. In: 2013 IEEE 7th International Power Engineering and Optimization Conference, 3-4 Jun 2013 , Bayview Hotel, Langkawi. . (Unpublished)
repository_type Digital Repository
institution_category Local University
institution Universiti Malaysia Pahang
building UMP Institutional Repository
collection Online Access
language English
topic TK Electrical engineering. Electronics Nuclear engineering
spellingShingle TK Electrical engineering. Electronics Nuclear engineering
Muhammad Ikram, Mohd Rashid
Suliana, Abd Ghani
Mohamad Fakhrudin, Sulaiman Mustahim
Development of High Power LED Driver Using LTSpice Software
description LED technology has been used widely in various applications due to its advantage in term of functionality, high efficiency, low cost, small size and high reliability. In order to improve LED performance and prolong LED’s life, High Power LED driver is been developed. LED driver is used to control output voltage by using current mode controlled method. This development of LED driver can increase the LED operation efficiency, provide high voltage protection, decreases the driver size and lastly make possible of user friendly installation. Voltage source is step up by using boost converter as main circuit. In control circuit, current mode controlled is used to regulate output characteristic of High Power LED. LTC 3783 is used as PWM controller to drive the gate and provide pulse signal to the MOSFET. This driver is designed to operate load that consists of 6 units LED each rating of 5 Watt connected in series. Theoretical calculation is made to obtain component specification. The LTspice software is used to simulate the driver circuit by using calculated parameters before move on to hardware implementation. Eagle software is used to design the Printed Circuit Board (PCB). Then, all components are mounted on the PCB which is made of FR4 material. The hardware built is tested experimentally and the output waveform is recorded.
format Conference or Workshop Item
author Muhammad Ikram, Mohd Rashid
Suliana, Abd Ghani
Mohamad Fakhrudin, Sulaiman Mustahim
author_facet Muhammad Ikram, Mohd Rashid
Suliana, Abd Ghani
Mohamad Fakhrudin, Sulaiman Mustahim
author_sort Muhammad Ikram, Mohd Rashid
title Development of High Power LED Driver Using LTSpice Software
title_short Development of High Power LED Driver Using LTSpice Software
title_full Development of High Power LED Driver Using LTSpice Software
title_fullStr Development of High Power LED Driver Using LTSpice Software
title_full_unstemmed Development of High Power LED Driver Using LTSpice Software
title_sort development of high power led driver using ltspice software
publishDate 2013
url http://umpir.ump.edu.my/id/eprint/3793/
http://umpir.ump.edu.my/id/eprint/3793/1/PID2782493.pdf
first_indexed 2023-09-18T21:58:18Z
last_indexed 2023-09-18T21:58:18Z
_version_ 1777414227974160384