Analysis of emulsion fuel spray characterictics using optical accessible chamber
This thesis deals with the study about the emulsion fuel spray characteristics using the optical accessible chamber. The Computational Fluids Dynamics (CFD) is used to illustrate how the spray developed in the chamber and the spray characteristic could be predicted. The overall macroscopic spray cha...
| Main Author: | |
|---|---|
| Format: | Undergraduates Project Papers |
| Language: | English |
| Published: |
2012
|
| Subjects: | |
| Online Access: | http://umpir.ump.edu.my/id/eprint/4560/ http://umpir.ump.edu.my/id/eprint/4560/ http://umpir.ump.edu.my/id/eprint/4560/1/cd6875_66.pdf |
| id |
ump-4560 |
|---|---|
| recordtype |
eprints |
| spelling |
ump-45602015-03-03T09:19:46Z http://umpir.ump.edu.my/id/eprint/4560/ Analysis of emulsion fuel spray characterictics using optical accessible chamber Mohd Firdaus, Kamarudin TL Motor vehicles. Aeronautics. Astronautics This thesis deals with the study about the emulsion fuel spray characteristics using the optical accessible chamber. The Computational Fluids Dynamics (CFD) is used to illustrate how the spray developed in the chamber and the spray characteristic could be predicted. The overall macroscopic spray characteristic such as the spray penetration length and the spray cone angle were measured manually. The different percentage of emulsion fuel is used; 5%, 10% and 15% of emulsion is tested at the same injection pressure 70MPa which is high pressure and 1MPa of high ambient pressure in the chamber but in different size of nozzle diameter; 0.2 mm and 0.6 mm. The development process and the timing injection in the test were very similar. Moreover, 15% of emulsion which is a higher percentage of emulsion fuel induced shorter penetration length at smaller nozzle diameter and wider cone angle at bigger nozzle diameter. However, there are discrepancies of the result due to improper boundary condition and inherit limitation of the model. For further study process, the emulsion process should be done by the owner-self so the more data from experimental work is needed such as properties of emulsion could be implemented in the study. 2012-06 Undergraduates Project Papers NonPeerReviewed application/pdf en http://umpir.ump.edu.my/id/eprint/4560/1/cd6875_66.pdf Mohd Firdaus, Kamarudin (2012) Analysis of emulsion fuel spray characterictics using optical accessible chamber. Faculty of Mechanical Engineering, Universiti Malaysia Pahang. http://iportal.ump.edu.my/lib/item?id=chamo:73251&theme=UMP2 |
| repository_type |
Digital Repository |
| institution_category |
Local University |
| institution |
Universiti Malaysia Pahang |
| building |
UMP Institutional Repository |
| collection |
Online Access |
| language |
English |
| topic |
TL Motor vehicles. Aeronautics. Astronautics |
| spellingShingle |
TL Motor vehicles. Aeronautics. Astronautics Mohd Firdaus, Kamarudin Analysis of emulsion fuel spray characterictics using optical accessible chamber |
| description |
This thesis deals with the study about the emulsion fuel spray characteristics using the optical accessible chamber. The Computational Fluids Dynamics (CFD) is used to illustrate how the spray developed in the chamber and the spray characteristic could be predicted. The overall macroscopic spray characteristic such as the spray penetration length and the spray cone angle were measured manually. The different percentage of emulsion fuel is used; 5%, 10% and 15% of emulsion is tested at the same injection pressure 70MPa which is high pressure and 1MPa of high ambient pressure in the chamber but in different size of nozzle diameter; 0.2 mm and 0.6 mm. The development process and the timing injection in the test were very similar. Moreover, 15% of emulsion which is a higher percentage of emulsion fuel induced shorter penetration length at smaller nozzle diameter and wider cone angle at bigger nozzle diameter. However, there are discrepancies of the result due to improper boundary condition and inherit limitation of the model. For further study process, the emulsion process should be done by the owner-self so the more data from experimental work is needed such as properties of emulsion could be implemented in the study. |
| format |
Undergraduates Project Papers |
| author |
Mohd Firdaus, Kamarudin |
| author_facet |
Mohd Firdaus, Kamarudin |
| author_sort |
Mohd Firdaus, Kamarudin |
| title |
Analysis of emulsion fuel spray characterictics using optical accessible chamber |
| title_short |
Analysis of emulsion fuel spray characterictics using optical accessible chamber |
| title_full |
Analysis of emulsion fuel spray characterictics using optical accessible chamber |
| title_fullStr |
Analysis of emulsion fuel spray characterictics using optical accessible chamber |
| title_full_unstemmed |
Analysis of emulsion fuel spray characterictics using optical accessible chamber |
| title_sort |
analysis of emulsion fuel spray characterictics using optical accessible chamber |
| publishDate |
2012 |
| url |
http://umpir.ump.edu.my/id/eprint/4560/ http://umpir.ump.edu.my/id/eprint/4560/ http://umpir.ump.edu.my/id/eprint/4560/1/cd6875_66.pdf |
| first_indexed |
2023-09-18T21:59:15Z |
| last_indexed |
2023-09-18T21:59:15Z |
| _version_ |
1777414287245967360 |