Investigation and experimental work on power generation by piezoelectric devices

This project was carried out to study the characteristics of different types of piezoelectric device and experimental work on how to obtain power generation by piezoelectric device. The objectives of this research are to investigate the different characteristic from different types of piezoelectric...

Full description

Bibliographic Details
Main Author: Muhammad Faiz Nor, Mohd Fozi
Format: Undergraduates Project Papers
Language:English
Published: 2012
Subjects:
Online Access:http://umpir.ump.edu.my/id/eprint/4647/
http://umpir.ump.edu.my/id/eprint/4647/
http://umpir.ump.edu.my/id/eprint/4647/1/cd6625_88.pdf
id ump-4647
recordtype eprints
spelling ump-46472015-03-03T09:20:14Z http://umpir.ump.edu.my/id/eprint/4647/ Investigation and experimental work on power generation by piezoelectric devices Muhammad Faiz Nor, Mohd Fozi TK Electrical engineering. Electronics Nuclear engineering This project was carried out to study the characteristics of different types of piezoelectric device and experimental work on how to obtain power generation by piezoelectric device. The objectives of this research are to investigate the different characteristic from different types of piezoelectric device and to find the method how to obtain power generation by piezoelectric devices. A test rig consists of the releaser, steel ball, specimen holder, and ruler to run this experiment. The types of piezoelectric used are single layer piezoelectric disc and two layer piezoelectric discs. The voltage produces from the piezoelectric devices are from the different impact forces applied on the device. The impact forces are from the steel ball which is release from different heights. The voltage signal produced from piezoelectric was captured by electrical device called oscilloscope. The voltage output for the single layer piezoelectric and two layers piezoelectric at the different impact force were recorded and analyzed. All the value recorded was compared to the different impact force applied. The result shows that the voltage output from the single layer piezoelectric are higher than the voltage output from the two layers piezoelectric at any impact force applied. The deflection of the piezoelectric is directly proportional to the voltage output. The conclusion has shown that the voltage produces by two layers piezoelectric are lower than single layer piezoelectric because the placement of the specimen is not optimum which mean there is limitation for the specimen to gain maximum deflection. 2012-06 Undergraduates Project Papers NonPeerReviewed application/pdf en http://umpir.ump.edu.my/id/eprint/4647/1/cd6625_88.pdf Muhammad Faiz Nor, Mohd Fozi (2012) Investigation and experimental work on power generation by piezoelectric devices. Faculty of Mechanical Engineering, Universiti Malaysia Pahang. http://iportal.ump.edu.my/lib/item?id=chamo:71949&theme=UMP2
repository_type Digital Repository
institution_category Local University
institution Universiti Malaysia Pahang
building UMP Institutional Repository
collection Online Access
language English
topic TK Electrical engineering. Electronics Nuclear engineering
spellingShingle TK Electrical engineering. Electronics Nuclear engineering
Muhammad Faiz Nor, Mohd Fozi
Investigation and experimental work on power generation by piezoelectric devices
description This project was carried out to study the characteristics of different types of piezoelectric device and experimental work on how to obtain power generation by piezoelectric device. The objectives of this research are to investigate the different characteristic from different types of piezoelectric device and to find the method how to obtain power generation by piezoelectric devices. A test rig consists of the releaser, steel ball, specimen holder, and ruler to run this experiment. The types of piezoelectric used are single layer piezoelectric disc and two layer piezoelectric discs. The voltage produces from the piezoelectric devices are from the different impact forces applied on the device. The impact forces are from the steel ball which is release from different heights. The voltage signal produced from piezoelectric was captured by electrical device called oscilloscope. The voltage output for the single layer piezoelectric and two layers piezoelectric at the different impact force were recorded and analyzed. All the value recorded was compared to the different impact force applied. The result shows that the voltage output from the single layer piezoelectric are higher than the voltage output from the two layers piezoelectric at any impact force applied. The deflection of the piezoelectric is directly proportional to the voltage output. The conclusion has shown that the voltage produces by two layers piezoelectric are lower than single layer piezoelectric because the placement of the specimen is not optimum which mean there is limitation for the specimen to gain maximum deflection.
format Undergraduates Project Papers
author Muhammad Faiz Nor, Mohd Fozi
author_facet Muhammad Faiz Nor, Mohd Fozi
author_sort Muhammad Faiz Nor, Mohd Fozi
title Investigation and experimental work on power generation by piezoelectric devices
title_short Investigation and experimental work on power generation by piezoelectric devices
title_full Investigation and experimental work on power generation by piezoelectric devices
title_fullStr Investigation and experimental work on power generation by piezoelectric devices
title_full_unstemmed Investigation and experimental work on power generation by piezoelectric devices
title_sort investigation and experimental work on power generation by piezoelectric devices
publishDate 2012
url http://umpir.ump.edu.my/id/eprint/4647/
http://umpir.ump.edu.my/id/eprint/4647/
http://umpir.ump.edu.my/id/eprint/4647/1/cd6625_88.pdf
first_indexed 2023-09-18T21:59:26Z
last_indexed 2023-09-18T21:59:26Z
_version_ 1777414298482507776