Taguchi Method Approach for Recyling Chip Waste from Machining Aluminum (AA6061) Using Hot Press Forging Process
This paper investigates the recycling waste aluminum alloy 6061 from high speed machine (HSM) machine using hot forging process. Hot forging process was able to recover the grain structure of material by controlling certain pressure and temperature. The experiments conducted adopted Taguchi method...
Main Authors: | , , |
---|---|
Format: | Article |
Language: | English |
Published: |
Trans Tech Publications, Switzerland
2013
|
Subjects: | |
Online Access: | http://umpir.ump.edu.my/id/eprint/4690/ http://umpir.ump.edu.my/id/eprint/4690/ http://umpir.ump.edu.my/id/eprint/4690/ http://umpir.ump.edu.my/id/eprint/4690/1/fkp-2013-shahrom-TaguchiMethodApproach_abs_only.pdf |
id |
ump-4690 |
---|---|
recordtype |
eprints |
spelling |
ump-46902015-06-22T02:50:04Z http://umpir.ump.edu.my/id/eprint/4690/ Taguchi Method Approach for Recyling Chip Waste from Machining Aluminum (AA6061) Using Hot Press Forging Process Mohamad Syahmi, Shahrom A. R., Yusoff Mohd Amri, Lajis TJ Mechanical engineering and machinery This paper investigates the recycling waste aluminum alloy 6061 from high speed machine (HSM) machine using hot forging process. Hot forging process was able to recover the grain structure of material by controlling certain pressure and temperature. The experiments conducted adopted Taguchi method design. Three factors selected are chip size, operating temperature and operating pressure with three levels for each factor. Both factors for operating temperature and pressure were directly controlled from hot forging machine. The chip sizes were prepared from HSM machine using three machining parameters with constant cutting speed and manipulate three levels for each parameter for feed rate and depth of cut. The final result between reference and experiment specimen showed the close gap in the tensile test. The main effect, signal to noise ratio and analysis of variance were employed to investigate the results and to establish the optimum parameters for hot forging process. It can be concluded that the hot forging process was able to recycle waste (chip) aluminum compared to the current recycling aluminum process. Trans Tech Publications, Switzerland 2013-12-04 Article PeerReviewed application/pdf en http://umpir.ump.edu.my/id/eprint/4690/1/fkp-2013-shahrom-TaguchiMethodApproach_abs_only.pdf Mohamad Syahmi, Shahrom and A. R., Yusoff and Mohd Amri, Lajis (2013) Taguchi Method Approach for Recyling Chip Waste from Machining Aluminum (AA6061) Using Hot Press Forging Process. Advanced Materials Research, 845. pp. 637-641. ISSN 1022-6680, ESSN: 1662-8985 http://dx.doi.org/10.4028/www.scientific.net/AMR.845.637 DOI: 10.4028/www.scientific.net/AMR.845.637 |
repository_type |
Digital Repository |
institution_category |
Local University |
institution |
Universiti Malaysia Pahang |
building |
UMP Institutional Repository |
collection |
Online Access |
language |
English |
topic |
TJ Mechanical engineering and machinery |
spellingShingle |
TJ Mechanical engineering and machinery Mohamad Syahmi, Shahrom A. R., Yusoff Mohd Amri, Lajis Taguchi Method Approach for Recyling Chip Waste from Machining Aluminum (AA6061) Using Hot Press Forging Process |
description |
This paper investigates the recycling waste aluminum alloy 6061 from high speed machine (HSM) machine using hot forging process. Hot forging process was able to recover the
grain structure of material by controlling certain pressure and temperature. The experiments conducted adopted Taguchi method design. Three factors selected are chip size, operating temperature and operating pressure with three levels for each factor. Both factors for operating
temperature and pressure were directly controlled from hot forging machine. The chip sizes were prepared from HSM machine using three machining parameters with constant cutting speed and manipulate three levels for each parameter for feed rate and depth of cut. The final result between reference and experiment specimen showed the close gap in the tensile test. The main effect, signal to noise ratio and analysis of variance were employed to investigate the results and to establish the optimum parameters for hot forging process. It can be concluded that the hot forging process was able to recycle waste (chip) aluminum compared to the current recycling aluminum process. |
format |
Article |
author |
Mohamad Syahmi, Shahrom A. R., Yusoff Mohd Amri, Lajis |
author_facet |
Mohamad Syahmi, Shahrom A. R., Yusoff Mohd Amri, Lajis |
author_sort |
Mohamad Syahmi, Shahrom |
title |
Taguchi Method Approach for Recyling Chip Waste from Machining
Aluminum (AA6061) Using Hot Press Forging Process |
title_short |
Taguchi Method Approach for Recyling Chip Waste from Machining
Aluminum (AA6061) Using Hot Press Forging Process |
title_full |
Taguchi Method Approach for Recyling Chip Waste from Machining
Aluminum (AA6061) Using Hot Press Forging Process |
title_fullStr |
Taguchi Method Approach for Recyling Chip Waste from Machining
Aluminum (AA6061) Using Hot Press Forging Process |
title_full_unstemmed |
Taguchi Method Approach for Recyling Chip Waste from Machining
Aluminum (AA6061) Using Hot Press Forging Process |
title_sort |
taguchi method approach for recyling chip waste from machining
aluminum (aa6061) using hot press forging process |
publisher |
Trans Tech Publications, Switzerland |
publishDate |
2013 |
url |
http://umpir.ump.edu.my/id/eprint/4690/ http://umpir.ump.edu.my/id/eprint/4690/ http://umpir.ump.edu.my/id/eprint/4690/ http://umpir.ump.edu.my/id/eprint/4690/1/fkp-2013-shahrom-TaguchiMethodApproach_abs_only.pdf |
first_indexed |
2023-09-18T21:59:31Z |
last_indexed |
2023-09-18T21:59:31Z |
_version_ |
1777414304659668992 |