Three-Dimensional Morphometric Study of the Trapezium Shape of the Trochlea Tali

The trapezium shape of the talar dome limits the use of 2-dimensional plain radiography for morphometric assessment because only 2 of the 4 required parameters can be measured. We used computed tomography data to measure the 4 morphologic parameters of the trochlea tali: anterior width, posterior wi...

Full description

Bibliographic Details
Main Authors:	Rosdi, Daud, Mohammed Rafiq, Abdul Kadir, Sudin, Izman, Amir Putra, Md Saat, Muhammad Hisyam, Lee, Aminudin, Che Ahmad
Format:	Article
Language:	English
Published:	Elsevier Ltd 2013
Subjects:	TJ Mechanical engineering and machinery
Online Access:	http://umpir.ump.edu.my/id/eprint/7039/ http://umpir.ump.edu.my/id/eprint/7039/ http://umpir.ump.edu.my/id/eprint/7039/ http://umpir.ump.edu.my/id/eprint/7039/1/Three-Dimensional_Morphometric_Study_of_the_Trapezium_Shape_of_the_Trochlea_Tali.pdf

id	ump-7039
recordtype	eprints
spelling	ump-70392018-01-19T02:16:51Z http://umpir.ump.edu.my/id/eprint/7039/ Three-Dimensional Morphometric Study of the Trapezium Shape of the Trochlea Tali Rosdi, Daud Mohammed Rafiq, Abdul Kadir Sudin, Izman Amir Putra, Md Saat Muhammad Hisyam, Lee Aminudin, Che Ahmad TJ Mechanical engineering and machinery The trapezium shape of the talar dome limits the use of 2-dimensional plain radiography for morphometric assessment because only 2 of the 4 required parameters can be measured. We used computed tomography data to measure the 4 morphologic parameters of the trochlea tali: anterior width, posterior width, trochlea tali length, and angle of trapezium shape. A total of 99 subjects underwent computed tomography scanning, and the left and right talus bones were both virtually modeled in 3 dimensions. The 4 morphologic parameters were measured 3 times each to obtain the intraclass correlation, and analysis of variance was used to check for any significant differences between the repeated measurements. The average intraclass correlation coefficient for the measurements for 2 to 3 trials was 0.94 ± 0.04. Statistical analyses were performed on the data from all 198 talus bones using SAS software, comparing male and female and left and right bones. All 4 morphometric values were greater in the male group. No significant differences were found between the left and right talus bones. A strong positive correlation was observed between the trochlea tali length and the anterior width. The angle of trapezium shape showed no correlation with the other 3 parameters. The measurements were compared with the dimensions of the current talar components of 4 total ankle arthroplasty implants. However, most of them did not perfectly match the trapezium shape of the talus from our population. We successfully analyzed the trapezium shape of the trochlea tali using reliable virtual 3-dimensional measurements. Compared with other published reports, our study showed a relatively smaller dimension of the trochlea tali than the European counterparts. Elsevier Ltd 2013 Article PeerReviewed application/pdf en http://umpir.ump.edu.my/id/eprint/7039/1/Three-Dimensional_Morphometric_Study_of_the_Trapezium_Shape_of_the_Trochlea_Tali.pdf Rosdi, Daud and Mohammed Rafiq, Abdul Kadir and Sudin, Izman and Amir Putra, Md Saat and Muhammad Hisyam, Lee and Aminudin, Che Ahmad (2013) Three-Dimensional Morphometric Study of the Trapezium Shape of the Trochlea Tali. The Journal of Foot and Ankle Surgery, 52. pp. 426-431. ISSN 1067-2516 http://dx.doi.org/10.1053/j.jfas.2013.03.007 DOI: 10.1053/j.jfas.2013.03.007
repository_type	Digital Repository
institution_category	Local University
institution	Universiti Malaysia Pahang
building	UMP Institutional Repository
collection	Online Access
language	English
topic	TJ Mechanical engineering and machinery
spellingShingle	TJ Mechanical engineering and machinery Rosdi, Daud Mohammed Rafiq, Abdul Kadir Sudin, Izman Amir Putra, Md Saat Muhammad Hisyam, Lee Aminudin, Che Ahmad Three-Dimensional Morphometric Study of the Trapezium Shape of the Trochlea Tali
description	The trapezium shape of the talar dome limits the use of 2-dimensional plain radiography for morphometric assessment because only 2 of the 4 required parameters can be measured. We used computed tomography data to measure the 4 morphologic parameters of the trochlea tali: anterior width, posterior width, trochlea tali length, and angle of trapezium shape. A total of 99 subjects underwent computed tomography scanning, and the left and right talus bones were both virtually modeled in 3 dimensions. The 4 morphologic parameters were measured 3 times each to obtain the intraclass correlation, and analysis of variance was used to check for any significant differences between the repeated measurements. The average intraclass correlation coefficient for the measurements for 2 to 3 trials was 0.94 ± 0.04. Statistical analyses were performed on the data from all 198 talus bones using SAS software, comparing male and female and left and right bones. All 4 morphometric values were greater in the male group. No significant differences were found between the left and right talus bones. A strong positive correlation was observed between the trochlea tali length and the anterior width. The angle of trapezium shape showed no correlation with the other 3 parameters. The measurements were compared with the dimensions of the current talar components of 4 total ankle arthroplasty implants. However, most of them did not perfectly match the trapezium shape of the talus from our population. We successfully analyzed the trapezium shape of the trochlea tali using reliable virtual 3-dimensional measurements. Compared with other published reports, our study showed a relatively smaller dimension of the trochlea tali than the European counterparts.
format	Article
author	Rosdi, Daud Mohammed Rafiq, Abdul Kadir Sudin, Izman Amir Putra, Md Saat Muhammad Hisyam, Lee Aminudin, Che Ahmad
author_facet	Rosdi, Daud Mohammed Rafiq, Abdul Kadir Sudin, Izman Amir Putra, Md Saat Muhammad Hisyam, Lee Aminudin, Che Ahmad
author_sort	Rosdi, Daud
title	Three-Dimensional Morphometric Study of the Trapezium Shape of the Trochlea Tali
title_short	Three-Dimensional Morphometric Study of the Trapezium Shape of the Trochlea Tali
title_full	Three-Dimensional Morphometric Study of the Trapezium Shape of the Trochlea Tali
title_fullStr	Three-Dimensional Morphometric Study of the Trapezium Shape of the Trochlea Tali
title_full_unstemmed	Three-Dimensional Morphometric Study of the Trapezium Shape of the Trochlea Tali
title_sort	three-dimensional morphometric study of the trapezium shape of the trochlea tali
publisher	Elsevier Ltd
publishDate	2013
url	http://umpir.ump.edu.my/id/eprint/7039/ http://umpir.ump.edu.my/id/eprint/7039/ http://umpir.ump.edu.my/id/eprint/7039/ http://umpir.ump.edu.my/id/eprint/7039/1/Three-Dimensional_Morphometric_Study_of_the_Trapezium_Shape_of_the_Trochlea_Tali.pdf
first_indexed	2023-09-18T22:03:19Z
last_indexed	2023-09-18T22:03:19Z
_version_	1777414542938079232

Three-Dimensional Morphometric Study of the Trapezium Shape of the Trochlea Tali

Similar Items