Relationship between machining parameters and surface roughness of brass using lathe machine.

Surface roughness is a consequence of all machining operations and has been the subject of investigative research for the better part of the last century because the product produce good surface finish is very valuable. But, not all the product needs a good surface finish. If the product not demands...

Full description

Bibliographic Details
Main Author:	Raja Mohd., Raja Idris
Format:	Undergraduates Project Papers
Language:	English
Published:	2008
Subjects:	TA Engineering (General). Civil engineering (General)
Online Access:	http://umpir.ump.edu.my/id/eprint/755/ http://umpir.ump.edu.my/id/eprint/755/1/RAJA_MOHD._BIN_RAJA_IDRIS.pdf

id	ump-755
recordtype	eprints
spelling	ump-7552015-03-03T07:46:42Z http://umpir.ump.edu.my/id/eprint/755/ Relationship between machining parameters and surface roughness of brass using lathe machine. Raja Mohd., Raja Idris TA Engineering (General). Civil engineering (General) Surface roughness is a consequence of all machining operations and has been the subject of investigative research for the better part of the last century because the product produce good surface finish is very valuable. But, not all the product needs a good surface finish. If the product not demands a good surface finish, the time of machining can be reduce to minimize the cost. This is about the effect of machining parameters on surface roughness using lathe machine. The focus of this project is to study the effect of Cutting speed, feed rate, and depth of cuts on brass`s surface roughness. The experiment was design using Design of experiment (DOE) method and from which number of experiment was constructed. The result show that feed rate is the most effected parameter on surface roughness when machining process then followed by depth of cut and cutting speed. All the parameters are proportional with brass`s surface roughness. 2008-10 Undergraduates Project Papers NonPeerReviewed application/pdf en http://umpir.ump.edu.my/id/eprint/755/1/RAJA_MOHD._BIN_RAJA_IDRIS.pdf Raja Mohd., Raja Idris (2008) Relationship between machining parameters and surface roughness of brass using lathe machine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
repository_type	Digital Repository
institution_category	Local University
institution	Universiti Malaysia Pahang
building	UMP Institutional Repository
collection	Online Access
language	English
topic	TA Engineering (General). Civil engineering (General)
spellingShingle	TA Engineering (General). Civil engineering (General) Raja Mohd., Raja Idris Relationship between machining parameters and surface roughness of brass using lathe machine.
description	Surface roughness is a consequence of all machining operations and has been the subject of investigative research for the better part of the last century because the product produce good surface finish is very valuable. But, not all the product needs a good surface finish. If the product not demands a good surface finish, the time of machining can be reduce to minimize the cost. This is about the effect of machining parameters on surface roughness using lathe machine. The focus of this project is to study the effect of Cutting speed, feed rate, and depth of cuts on brass`s surface roughness. The experiment was design using Design of experiment (DOE) method and from which number of experiment was constructed. The result show that feed rate is the most effected parameter on surface roughness when machining process then followed by depth of cut and cutting speed. All the parameters are proportional with brass`s surface roughness.
format	Undergraduates Project Papers
author	Raja Mohd., Raja Idris
author_facet	Raja Mohd., Raja Idris
author_sort	Raja Mohd., Raja Idris
title	Relationship between machining parameters and surface roughness of brass using lathe machine.
title_short	Relationship between machining parameters and surface roughness of brass using lathe machine.
title_full	Relationship between machining parameters and surface roughness of brass using lathe machine.
title_fullStr	Relationship between machining parameters and surface roughness of brass using lathe machine.
title_full_unstemmed	Relationship between machining parameters and surface roughness of brass using lathe machine.
title_sort	relationship between machining parameters and surface roughness of brass using lathe machine.
publishDate	2008
url	http://umpir.ump.edu.my/id/eprint/755/ http://umpir.ump.edu.my/id/eprint/755/1/RAJA_MOHD._BIN_RAJA_IDRIS.pdf
first_indexed	2023-09-18T21:53:16Z
last_indexed	2023-09-18T21:53:16Z
_version_	1777413911022141440

Relationship between machining parameters and surface roughness of brass using lathe machine.

Similar Items