PID controller application on cutting tool vibration in milling process

The control system was used to suppress vibration chatter from machining process. Dynamic and mathematically model had derived from the one degree of freedom (1DOF) for the cutting tool. Control system that been used in this project was passive system and active system. The passive system used to sh...

Full description

Bibliographic Details
Main Author:	Mohd Faizol Hafiz, Ab Majid
Format:	Undergraduates Project Papers
Language:	English
Published:	2012
Subjects:	TJ Mechanical engineering and machinery
Online Access:	http://umpir.ump.edu.my/id/eprint/7659/ http://umpir.ump.edu.my/id/eprint/7659/ http://umpir.ump.edu.my/id/eprint/7659/1/MOHD_FAIZOL_HAFIZ_BIN_AB_MAJID.PDF

id	ump-7659
recordtype	eprints
spelling	ump-76592016-07-26T04:06:53Z http://umpir.ump.edu.my/id/eprint/7659/ PID controller application on cutting tool vibration in milling process Mohd Faizol Hafiz, Ab Majid TJ Mechanical engineering and machinery The control system was used to suppress vibration chatter from machining process. Dynamic and mathematically model had derived from the one degree of freedom (1DOF) for the cutting tool. Control system that been used in this project was passive system and active system. The passive system used to show the instability system and active system had been introduces to control the system. The PID(proportionalintegral-derivative) was been used in this project.. To complete the active system, linear actuator had been used to counter the vibration occur. The simulation had been run using MATLAB/SIMIJLINK software. Comparative study had been done between passive and active control system. From comparative study, PID showed an effectiveness result that suppresses vibration during machining process. PID produced small error compare to passive system (uncontrolled system). PID control was found suitable in control system for machining. 2012-06 Undergraduates Project Papers NonPeerReviewed application/pdf en http://umpir.ump.edu.my/id/eprint/7659/1/MOHD_FAIZOL_HAFIZ_BIN_AB_MAJID.PDF Mohd Faizol Hafiz, Ab Majid (2012) PID controller application on cutting tool vibration in milling process. Faculty of Mechanical Engineering, Universiti Malaysia Pahang. http://iportal.ump.edu.my/lib/item?id=chamo:77866&theme=UMP2
repository_type	Digital Repository
institution_category	Local University
institution	Universiti Malaysia Pahang
building	UMP Institutional Repository
collection	Online Access
language	English
topic	TJ Mechanical engineering and machinery
spellingShingle	TJ Mechanical engineering and machinery Mohd Faizol Hafiz, Ab Majid PID controller application on cutting tool vibration in milling process
description	The control system was used to suppress vibration chatter from machining process. Dynamic and mathematically model had derived from the one degree of freedom (1DOF) for the cutting tool. Control system that been used in this project was passive system and active system. The passive system used to show the instability system and active system had been introduces to control the system. The PID(proportionalintegral-derivative) was been used in this project.. To complete the active system, linear actuator had been used to counter the vibration occur. The simulation had been run using MATLAB/SIMIJLINK software. Comparative study had been done between passive and active control system. From comparative study, PID showed an effectiveness result that suppresses vibration during machining process. PID produced small error compare to passive system (uncontrolled system). PID control was found suitable in control system for machining.
format	Undergraduates Project Papers
author	Mohd Faizol Hafiz, Ab Majid
author_facet	Mohd Faizol Hafiz, Ab Majid
author_sort	Mohd Faizol Hafiz, Ab Majid
title	PID controller application on cutting tool vibration in milling process
title_short	PID controller application on cutting tool vibration in milling process
title_full	PID controller application on cutting tool vibration in milling process
title_fullStr	PID controller application on cutting tool vibration in milling process
title_full_unstemmed	PID controller application on cutting tool vibration in milling process
title_sort	pid controller application on cutting tool vibration in milling process
publishDate	2012
url	http://umpir.ump.edu.my/id/eprint/7659/ http://umpir.ump.edu.my/id/eprint/7659/ http://umpir.ump.edu.my/id/eprint/7659/1/MOHD_FAIZOL_HAFIZ_BIN_AB_MAJID.PDF
first_indexed	2023-09-18T22:04:30Z
last_indexed	2023-09-18T22:04:30Z
_version_	1777414617259048960

PID controller application on cutting tool vibration in milling process

Similar Items