Improvement of Physico-Mechanical, Thermomechanical, Thermal and Degradation Properties of PCL/Gelatin Biocomposites: Effect of Gamma Radiation
This research was to study the effects of gelatin content variation and gamma radiation after the 2-ethylhexyl acrylate (EHA) pre-treatment on the foundamental properties of gelatin film laminated polycaprolactone (PCL) biocomposites. PCL/gelatin film (PCL/GF) composites were fabricated by compressi...
| Main Authors: | , |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
Elsevier Ltd
2015
|
| Subjects: | |
| Online Access: | http://umpir.ump.edu.my/id/eprint/8041/ http://umpir.ump.edu.my/id/eprint/8041/ http://umpir.ump.edu.my/id/eprint/8041/ http://umpir.ump.edu.my/id/eprint/8041/1/fkksa-2015-beg-Improvement%20of%20Physico-Mechanical.pdf |
| id |
ump-8041 |
|---|---|
| recordtype |
eprints |
| spelling |
ump-80412018-01-09T07:48:01Z http://umpir.ump.edu.my/id/eprint/8041/ Improvement of Physico-Mechanical, Thermomechanical, Thermal and Degradation Properties of PCL/Gelatin Biocomposites: Effect of Gamma Radiation Beg, M. D. H. Zaman, Haydar U. TP Chemical technology This research was to study the effects of gelatin content variation and gamma radiation after the 2-ethylhexyl acrylate (EHA) pre-treatment on the foundamental properties of gelatin film laminated polycaprolactone (PCL) biocomposites. PCL/gelatin film (PCL/GF) composites were fabricated by compression molding and their properties were studied by physico-mechanical, thermomechanical, thermal and degradation properties. The results from mechanical properties such as tensile modulus and impact strength of the composites increased with increasing of gelatin content up to 10 wt% and then decreased while the tensile strength and elongation at break decreased. EHA monomer (2–8 wt%) was added to the gelatin solution and films were prepared by casting and found to increase the mechanical properties of the PCL/EHA blended gelatin film (PCL/EGF) composites. Treatment of the gelatin film with gamma radiation after the EHA pre-treatment showed the best mechanical properties of the resulting composites. Dynamic mechanical thermal analysis results showed that the storage modulus of the PCL/EGF and PCL/EHA blended gelatin film with gamma radiation (PCL/GEGF) composites was increased significantly. The degradation properties in water and soil were determined for the non-irradiated and irradiated composites. It was observed that the non-irradiated composite degrades more than that of the irradiated composites. Elsevier Ltd 2015 Article PeerReviewed application/pdf en http://umpir.ump.edu.my/id/eprint/8041/1/fkksa-2015-beg-Improvement%20of%20Physico-Mechanical.pdf Beg, M. D. H. and Zaman, Haydar U. (2015) Improvement of Physico-Mechanical, Thermomechanical, Thermal and Degradation Properties of PCL/Gelatin Biocomposites: Effect of Gamma Radiation. Radiation Physics and Chemistry, 109. pp. 73-82. ISSN 0969-806X http://dx.doi.org/10.1016/j.radphyschem.2014.12.011 DOI: 10.1016/j.radphyschem.2014.12.011 |
| repository_type |
Digital Repository |
| institution_category |
Local University |
| institution |
Universiti Malaysia Pahang |
| building |
UMP Institutional Repository |
| collection |
Online Access |
| language |
English |
| topic |
TP Chemical technology |
| spellingShingle |
TP Chemical technology Beg, M. D. H. Zaman, Haydar U. Improvement of Physico-Mechanical, Thermomechanical, Thermal and Degradation Properties of PCL/Gelatin Biocomposites: Effect of Gamma Radiation |
| description |
This research was to study the effects of gelatin content variation and gamma radiation after the 2-ethylhexyl acrylate (EHA) pre-treatment on the foundamental properties of gelatin film laminated polycaprolactone (PCL) biocomposites. PCL/gelatin film (PCL/GF) composites were fabricated by compression molding and their properties were studied by physico-mechanical, thermomechanical, thermal and degradation properties. The results from mechanical properties such as tensile modulus and impact strength of the composites increased with increasing of gelatin content up to 10 wt% and then decreased while the tensile strength and elongation at break decreased. EHA monomer (2–8 wt%) was added to the gelatin solution and films were prepared by casting and found to increase the mechanical properties of the PCL/EHA blended gelatin film (PCL/EGF) composites. Treatment of the gelatin film with gamma radiation after the EHA pre-treatment showed the best mechanical properties of the resulting composites. Dynamic mechanical thermal analysis results showed that the storage modulus of the PCL/EGF and PCL/EHA blended gelatin film with gamma radiation (PCL/GEGF) composites was increased significantly. The degradation properties in water and soil were determined for the non-irradiated and irradiated composites. It was observed that the non-irradiated composite degrades more than that of the irradiated composites. |
| format |
Article |
| author |
Beg, M. D. H. Zaman, Haydar U. |
| author_facet |
Beg, M. D. H. Zaman, Haydar U. |
| author_sort |
Beg, M. D. H. |
| title |
Improvement of Physico-Mechanical, Thermomechanical, Thermal and Degradation Properties of PCL/Gelatin Biocomposites: Effect of Gamma Radiation |
| title_short |
Improvement of Physico-Mechanical, Thermomechanical, Thermal and Degradation Properties of PCL/Gelatin Biocomposites: Effect of Gamma Radiation |
| title_full |
Improvement of Physico-Mechanical, Thermomechanical, Thermal and Degradation Properties of PCL/Gelatin Biocomposites: Effect of Gamma Radiation |
| title_fullStr |
Improvement of Physico-Mechanical, Thermomechanical, Thermal and Degradation Properties of PCL/Gelatin Biocomposites: Effect of Gamma Radiation |
| title_full_unstemmed |
Improvement of Physico-Mechanical, Thermomechanical, Thermal and Degradation Properties of PCL/Gelatin Biocomposites: Effect of Gamma Radiation |
| title_sort |
improvement of physico-mechanical, thermomechanical, thermal and degradation properties of pcl/gelatin biocomposites: effect of gamma radiation |
| publisher |
Elsevier Ltd |
| publishDate |
2015 |
| url |
http://umpir.ump.edu.my/id/eprint/8041/ http://umpir.ump.edu.my/id/eprint/8041/ http://umpir.ump.edu.my/id/eprint/8041/ http://umpir.ump.edu.my/id/eprint/8041/1/fkksa-2015-beg-Improvement%20of%20Physico-Mechanical.pdf |
| first_indexed |
2023-09-18T22:05:18Z |
| last_indexed |
2023-09-18T22:05:18Z |
| _version_ |
1777414667832918016 |