Investigation of mechanical properties of aluminium-steel welding using different welding technique and processes

Investigation of mechanical properties of aluminium-steel welding using different welding technique and processes

This report is presents about the investigation towards mechanical properties property of dissimilar welding by using different welding technique and processes. The objective of this research is investigate the weld joint quality of aluminium AA6061 and galvanized iron with different types of joinin...

Full description

Bibliographic Details
Main Author: Mohd Sani, Idris
Format: Undergraduates Project Papers
Language:English
Published: 2013
Subjects:
TA Engineering (General). Civil engineering (General)
Online Access:http://umpir.ump.edu.my/id/eprint/8316/
http://umpir.ump.edu.my/id/eprint/8316/
http://umpir.ump.edu.my/id/eprint/8316/1/cd8221_73.pdf
id ump-8316
recordtype eprints
spelling ump-83162015-11-16T08:10:27Z http://umpir.ump.edu.my/id/eprint/8316/ Investigation of mechanical properties of aluminium-steel welding using different welding technique and processes Mohd Sani, Idris TA Engineering (General). Civil engineering (General) This report is presents about the investigation towards mechanical properties property of dissimilar welding by using different welding technique and processes. The objective of this research is investigate the weld joint quality of aluminium AA6061 and galvanized iron with different types of joining those are butt and lap joint and with different of welding processes, namely Metal Inert Gas (MIG) and Tungsten Inert Gas (TIG). The experiments carried out along this research such as non-destructive test (NDT), Vickers hardness test, tensile test and microstructure optical analysis. Based on the result of experiment, there are a few defects on weld appearances such as porosity, crack, and incomplete penetration. Butt joint of TIG welding (TBAG) shows a better weld appearance compared to other groups. Microstructure analysis showed that joint of TBAG has thinner brittle intermetallic compound layer (IMC) than the other group which shows thicker IMC, indicating a weaker joint. Based on the Vickers hardness analysis, the TIG welding shows higher hardness value than the MIG welding with average hardness value of 114 HV and 82 HV respectively , while tensile strength analysis showed that the butt joint samples has greater strength than the lap joint counterpart. TBAG has the highest tensile strength compared to the others group with value of 107 MPa while MLAG has the lowest strength with the value of 42 MPa. It can be concluded that TBAG is the best joint since TIG and butt joint showed the best value based on the analysis that had been carried out. 2013-06 Undergraduates Project Papers NonPeerReviewed application/pdf en http://umpir.ump.edu.my/id/eprint/8316/1/cd8221_73.pdf Mohd Sani, Idris (2013) Investigation of mechanical properties of aluminium-steel welding using different welding technique and processes. Faculty of Mechanical Engineering, Universiti Malaysia Pahang. http://iportal.ump.edu.my/lib/item?id=chamo:81939&theme=UMP2
repository_type Digital Repository
institution_category Local University
institution Universiti Malaysia Pahang
building UMP Institutional Repository
collection Online Access
language English
topic TA Engineering (General). Civil engineering (General)
spellingShingle TA Engineering (General). Civil engineering (General)
Mohd Sani, Idris
Investigation of mechanical properties of aluminium-steel welding using different welding technique and processes
description This report is presents about the investigation towards mechanical properties property of dissimilar welding by using different welding technique and processes. The objective of this research is investigate the weld joint quality of aluminium AA6061 and galvanized iron with different types of joining those are butt and lap joint and with different of welding processes, namely Metal Inert Gas (MIG) and Tungsten Inert Gas (TIG). The experiments carried out along this research such as non-destructive test (NDT), Vickers hardness test, tensile test and microstructure optical analysis. Based on the result of experiment, there are a few defects on weld appearances such as porosity, crack, and incomplete penetration. Butt joint of TIG welding (TBAG) shows a better weld appearance compared to other groups. Microstructure analysis showed that joint of TBAG has thinner brittle intermetallic compound layer (IMC) than the other group which shows thicker IMC, indicating a weaker joint. Based on the Vickers hardness analysis, the TIG welding shows higher hardness value than the MIG welding with average hardness value of 114 HV and 82 HV respectively , while tensile strength analysis showed that the butt joint samples has greater strength than the lap joint counterpart. TBAG has the highest tensile strength compared to the others group with value of 107 MPa while MLAG has the lowest strength with the value of 42 MPa. It can be concluded that TBAG is the best joint since TIG and butt joint showed the best value based on the analysis that had been carried out.
format Undergraduates Project Papers
author Mohd Sani, Idris
author_facet Mohd Sani, Idris
author_sort Mohd Sani, Idris
title Investigation of mechanical properties of aluminium-steel welding using different welding technique and processes
title_short Investigation of mechanical properties of aluminium-steel welding using different welding technique and processes
title_full Investigation of mechanical properties of aluminium-steel welding using different welding technique and processes
title_fullStr Investigation of mechanical properties of aluminium-steel welding using different welding technique and processes
title_full_unstemmed Investigation of mechanical properties of aluminium-steel welding using different welding technique and processes
title_sort investigation of mechanical properties of aluminium-steel welding using different welding technique and processes
publishDate 2013
url http://umpir.ump.edu.my/id/eprint/8316/
http://umpir.ump.edu.my/id/eprint/8316/
http://umpir.ump.edu.my/id/eprint/8316/1/cd8221_73.pdf
first_indexed 2023-09-18T22:05:45Z
last_indexed 2023-09-18T22:05:45Z
_version_ 1777414696309096448

Similar Items