Analysis of electromagnetic energy harvester for various length of beam

Energy harvesting is presented by the conversion of ambient mechanical energy into usable electrical energy. Compared with energy stored in such as batteries which is common storage elements, the environments represent a relatively inexhaustible source. In this study, there are two objectives that n...

Full description

Bibliographic Details
Main Author:	Muhammad Izzuddin, Masrom
Format:	Undergraduates Project Papers
Language:	English
Published:	2012
Subjects:	TJ Mechanical engineering and machinery
Online Access:	http://umpir.ump.edu.my/id/eprint/8468/ http://umpir.ump.edu.my/id/eprint/8468/ http://umpir.ump.edu.my/id/eprint/8468/1/CD6938_%40_68.pdf

id	ump-8468
recordtype	eprints
spelling	ump-84682015-11-13T02:07:06Z http://umpir.ump.edu.my/id/eprint/8468/ Analysis of electromagnetic energy harvester for various length of beam Muhammad Izzuddin, Masrom TJ Mechanical engineering and machinery Energy harvesting is presented by the conversion of ambient mechanical energy into usable electrical energy. Compared with energy stored in such as batteries which is common storage elements, the environments represent a relatively inexhaustible source. In this study, there are two objectives that need to achieve. The first objective is to design an electromechanical energy harvester based on beam structure and analysis the effect of various length of beams to the voltage produced by the energy harvester. For the scope of research in this study is to see the relationship between frequencies and the amount of electricity produced, design a small size of energy harvester, beams are limited 3 length and outputs are presented on LCD and computer based. In this study, energy harvesting from the electromagnetic that produce magnetic field converts mechanical energy to electrical energy. Based on basic operating principles, magnetic flux produced when there are movements of the magnet through the coils. In this study, fabricate an electromagnetic energy harvester is the first step and make the experiment for three different length which is 9 cm, 11 cm and 13 cm. Frequency that use during experiment in range 100 Hz to 500 Hz. Result from the experiment are 9 cm (0.614211 V), 11 cm (0.69845 V) and 13 cm (0.915395 V). For the conclusion, this experiment succesfully achieve the main objective of this project study. To design an electromechanical energy harvester based on beam structure and make analysis about the effect of various length of cantilever beams to the voltage produced by the energy harvester. Important recommendation in this study is the range of the frequency should used frequency in range 10 Hz until 50 Hz, scaling down the dimensions of the proposed structure and to see its feasibility to be used in very lowpower micro systems, the mass of the coil should be large as possible within the available volume of the device to generate higher amount of voltage and make a simulation using Finite Element Analysis (FEA). Applications in this study such as medical implants and embedded sensors in buildings and similar structures are just a few of many examples. 2012-06 Undergraduates Project Papers NonPeerReviewed application/pdf en http://umpir.ump.edu.my/id/eprint/8468/1/CD6938_%40_68.pdf Muhammad Izzuddin, Masrom (2012) Analysis of electromagnetic energy harvester for various length of beam. Faculty of Mechanical Engineering , Universiti Malaysia Pahang. http://iportal.ump.edu.my/lib/item?id=chamo:77802&theme=UMP2
repository_type	Digital Repository
institution_category	Local University
institution	Universiti Malaysia Pahang
building	UMP Institutional Repository
collection	Online Access
language	English
topic	TJ Mechanical engineering and machinery
spellingShingle	TJ Mechanical engineering and machinery Muhammad Izzuddin, Masrom Analysis of electromagnetic energy harvester for various length of beam
description	Energy harvesting is presented by the conversion of ambient mechanical energy into usable electrical energy. Compared with energy stored in such as batteries which is common storage elements, the environments represent a relatively inexhaustible source. In this study, there are two objectives that need to achieve. The first objective is to design an electromechanical energy harvester based on beam structure and analysis the effect of various length of beams to the voltage produced by the energy harvester. For the scope of research in this study is to see the relationship between frequencies and the amount of electricity produced, design a small size of energy harvester, beams are limited 3 length and outputs are presented on LCD and computer based. In this study, energy harvesting from the electromagnetic that produce magnetic field converts mechanical energy to electrical energy. Based on basic operating principles, magnetic flux produced when there are movements of the magnet through the coils. In this study, fabricate an electromagnetic energy harvester is the first step and make the experiment for three different length which is 9 cm, 11 cm and 13 cm. Frequency that use during experiment in range 100 Hz to 500 Hz. Result from the experiment are 9 cm (0.614211 V), 11 cm (0.69845 V) and 13 cm (0.915395 V). For the conclusion, this experiment succesfully achieve the main objective of this project study. To design an electromechanical energy harvester based on beam structure and make analysis about the effect of various length of cantilever beams to the voltage produced by the energy harvester. Important recommendation in this study is the range of the frequency should used frequency in range 10 Hz until 50 Hz, scaling down the dimensions of the proposed structure and to see its feasibility to be used in very lowpower micro systems, the mass of the coil should be large as possible within the available volume of the device to generate higher amount of voltage and make a simulation using Finite Element Analysis (FEA). Applications in this study such as medical implants and embedded sensors in buildings and similar structures are just a few of many examples.
format	Undergraduates Project Papers
author	Muhammad Izzuddin, Masrom
author_facet	Muhammad Izzuddin, Masrom
author_sort	Muhammad Izzuddin, Masrom
title	Analysis of electromagnetic energy harvester for various length of beam
title_short	Analysis of electromagnetic energy harvester for various length of beam
title_full	Analysis of electromagnetic energy harvester for various length of beam
title_fullStr	Analysis of electromagnetic energy harvester for various length of beam
title_full_unstemmed	Analysis of electromagnetic energy harvester for various length of beam
title_sort	analysis of electromagnetic energy harvester for various length of beam
publishDate	2012
url	http://umpir.ump.edu.my/id/eprint/8468/ http://umpir.ump.edu.my/id/eprint/8468/ http://umpir.ump.edu.my/id/eprint/8468/1/CD6938_%40_68.pdf
first_indexed	2023-09-18T22:06:04Z
last_indexed	2023-09-18T22:06:04Z
_version_	1777414716395618304

Analysis of electromagnetic energy harvester for various length of beam

Similar Items