Quality improvement for manufacturing process by using 7 QC tools in SME

The aim of this project is studying the quality improvement after implementation of 7 QC tools in a manufacturing process in selected Small Medium Enterprise (SME) company. It is to detect the defects that occurred in the manufacturing process and analyzed using 7 QC tools. Besides that, the new des...

Full description

Bibliographic Details
Main Author:	Muhammad Hamizan, Khalid
Format:	Undergraduates Project Papers
Language:	English
Published:	2013
Subjects:	TS Manufactures
Online Access:	http://umpir.ump.edu.my/id/eprint/8628/ http://umpir.ump.edu.my/id/eprint/8628/ http://umpir.ump.edu.my/id/eprint/8628/1/CD8044_%40_54.pdf

id	ump-8628
recordtype	eprints
spelling	ump-86282015-11-02T02:45:25Z http://umpir.ump.edu.my/id/eprint/8628/ Quality improvement for manufacturing process by using 7 QC tools in SME Muhammad Hamizan, Khalid TS Manufactures The aim of this project is studying the quality improvement after implementation of 7 QC tools in a manufacturing process in selected Small Medium Enterprise (SME) company. It is to detect the defects that occurred in the manufacturing process and analyzed using 7 QC tools. Besides that, the new design has been proposed for defect reduction and improving the production line. The chosen company was Kilang Keropok MakTeh and product that being analyzed is keropok sira. The main scope of this project is the implementation of 7 QC tools. Observation throughout the production line is done. There are ten main processes which are mincing, mixing, shaping, boiling, drying, freezing, slicing, frying, flavouring, and packaging. By using a check sheet, defects that occur throughout the production line are collected in 30 days. The data are then arranged back using Pareto Chart according to the frequency of the defects. The data are arranged from the highest defect to the lowest defect. The highest defect detected was under cook problem. Brainstorming session is done with the workers and also the manager to create the cause and effect diagram to details the problem. All possible causes are categorise under 4M which are Manpower, Machines, Materials, and Methods. Based on the cause and effect diagram, the improvement is generated. The improvement is to fabricate separators inside the boiler. Current boiler has problems such as low heating temperature and uneven temperature. Referring to Heat Transfer theory, small area needs only need small value of heat to raise the temperature to the desire temperature. Reducing the area of heating inside the boiler by inserting the separators, temperature inside the boiler is increased and the temperature became more stable. All data is tabulated in form of graphs and tables. Percentage of defects reduce is also calculated. 2013-06 Undergraduates Project Papers NonPeerReviewed application/pdf en http://umpir.ump.edu.my/id/eprint/8628/1/CD8044_%40_54.pdf Muhammad Hamizan, Khalid (2013) Quality improvement for manufacturing process by using 7 QC tools in SME. Faculty of Mechanical Engineering , Universiti Malaysia Pahang. http://iportal.ump.edu.my/lib/item?id=chamo:83743&theme=UMP2
repository_type	Digital Repository
institution_category	Local University
institution	Universiti Malaysia Pahang
building	UMP Institutional Repository
collection	Online Access
language	English
topic	TS Manufactures
spellingShingle	TS Manufactures Muhammad Hamizan, Khalid Quality improvement for manufacturing process by using 7 QC tools in SME
description	The aim of this project is studying the quality improvement after implementation of 7 QC tools in a manufacturing process in selected Small Medium Enterprise (SME) company. It is to detect the defects that occurred in the manufacturing process and analyzed using 7 QC tools. Besides that, the new design has been proposed for defect reduction and improving the production line. The chosen company was Kilang Keropok MakTeh and product that being analyzed is keropok sira. The main scope of this project is the implementation of 7 QC tools. Observation throughout the production line is done. There are ten main processes which are mincing, mixing, shaping, boiling, drying, freezing, slicing, frying, flavouring, and packaging. By using a check sheet, defects that occur throughout the production line are collected in 30 days. The data are then arranged back using Pareto Chart according to the frequency of the defects. The data are arranged from the highest defect to the lowest defect. The highest defect detected was under cook problem. Brainstorming session is done with the workers and also the manager to create the cause and effect diagram to details the problem. All possible causes are categorise under 4M which are Manpower, Machines, Materials, and Methods. Based on the cause and effect diagram, the improvement is generated. The improvement is to fabricate separators inside the boiler. Current boiler has problems such as low heating temperature and uneven temperature. Referring to Heat Transfer theory, small area needs only need small value of heat to raise the temperature to the desire temperature. Reducing the area of heating inside the boiler by inserting the separators, temperature inside the boiler is increased and the temperature became more stable. All data is tabulated in form of graphs and tables. Percentage of defects reduce is also calculated.
format	Undergraduates Project Papers
author	Muhammad Hamizan, Khalid
author_facet	Muhammad Hamizan, Khalid
author_sort	Muhammad Hamizan, Khalid
title	Quality improvement for manufacturing process by using 7 QC tools in SME
title_short	Quality improvement for manufacturing process by using 7 QC tools in SME
title_full	Quality improvement for manufacturing process by using 7 QC tools in SME
title_fullStr	Quality improvement for manufacturing process by using 7 QC tools in SME
title_full_unstemmed	Quality improvement for manufacturing process by using 7 QC tools in SME
title_sort	quality improvement for manufacturing process by using 7 qc tools in sme
publishDate	2013
url	http://umpir.ump.edu.my/id/eprint/8628/ http://umpir.ump.edu.my/id/eprint/8628/ http://umpir.ump.edu.my/id/eprint/8628/1/CD8044_%40_54.pdf
first_indexed	2023-09-18T22:06:24Z
last_indexed	2023-09-18T22:06:24Z
_version_	1777414737269620736

Quality improvement for manufacturing process by using 7 QC tools in SME

Similar Items