Development of plug-in air powered four wheels motorcycle drivetrain control unit
This thesis is related to the development of plug-in air powered four wheel motorcycles drive train system that transfers rotational energy from power train to the driving wheel. The objective of this thesis is to develop an air hybrid drivetrain unit and control the power and torque from the powert...
| Main Author: | |
|---|---|
| Format: | Undergraduates Project Papers |
| Language: | English |
| Published: |
2013
|
| Subjects: | |
| Online Access: | http://umpir.ump.edu.my/id/eprint/8653/ http://umpir.ump.edu.my/id/eprint/8653/ http://umpir.ump.edu.my/id/eprint/8653/1/cd8155.pdf |
| id |
ump-8653 |
|---|---|
| recordtype |
eprints |
| spelling |
ump-86532015-11-02T01:47:57Z http://umpir.ump.edu.my/id/eprint/8653/ Development of plug-in air powered four wheels motorcycle drivetrain control unit Tan, Beng Leng TL Motor vehicles. Aeronautics. Astronautics This thesis is related to the development of plug-in air powered four wheel motorcycles drive train system that transfers rotational energy from power train to the driving wheel. The objective of this thesis is to develop an air hybrid drivetrain unit and control the power and torque from the powertrain to the driving wheel by using sequential manual transmission. This thesis describes the process of developing sequential shift-by-wire system to make gear shifting for easier for 4 wheel motorcycle. The controller used in this project was 18F PIC 4550 microprocessor. The system programming performed using FLOWCODE version 4.0. 2 units of electromechanical linear actuator were used in this project as an actuator for gear shifting on a manual transmission. Chain drives were selected as power transfer linkage from air hybrid engine to the driving wheel with under drive configuration. Besides the development of shift-by-wire system, the torque on the driving wheel also had been calculated and analysed. In additional, the maximum speed that can be achieved by four wheel motorcycles was also calculated. 2013-06 Undergraduates Project Papers NonPeerReviewed application/pdf en http://umpir.ump.edu.my/id/eprint/8653/1/cd8155.pdf Tan, Beng Leng (2013) Development of plug-in air powered four wheels motorcycle drivetrain control unit. Faculty of Mechanical Engineering, Universiti Malaysia Pahang. http://iportal.ump.edu.my/lib/item?id=chamo:83004&theme=UMP2 |
| repository_type |
Digital Repository |
| institution_category |
Local University |
| institution |
Universiti Malaysia Pahang |
| building |
UMP Institutional Repository |
| collection |
Online Access |
| language |
English |
| topic |
TL Motor vehicles. Aeronautics. Astronautics |
| spellingShingle |
TL Motor vehicles. Aeronautics. Astronautics Tan, Beng Leng Development of plug-in air powered four wheels motorcycle drivetrain control unit |
| description |
This thesis is related to the development of plug-in air powered four wheel motorcycles drive train system that transfers rotational energy from power train to the driving wheel. The objective of this thesis is to develop an air hybrid drivetrain unit and control the power and torque from the powertrain to the driving wheel by using sequential manual transmission. This thesis describes the process of developing sequential shift-by-wire system to make gear shifting for easier for 4 wheel motorcycle. The controller used in this project was 18F PIC 4550 microprocessor. The system programming performed using FLOWCODE version 4.0. 2 units of electromechanical linear actuator were used in this project as an actuator for gear shifting on a manual transmission. Chain drives were selected as power transfer linkage from air hybrid engine to the driving wheel with under drive configuration. Besides the development of shift-by-wire system, the torque on the driving wheel also had been calculated and analysed. In additional, the maximum speed that can be achieved by four wheel motorcycles was also calculated. |
| format |
Undergraduates Project Papers |
| author |
Tan, Beng Leng |
| author_facet |
Tan, Beng Leng |
| author_sort |
Tan, Beng Leng |
| title |
Development of plug-in air powered four wheels motorcycle drivetrain control unit |
| title_short |
Development of plug-in air powered four wheels motorcycle drivetrain control unit |
| title_full |
Development of plug-in air powered four wheels motorcycle drivetrain control unit |
| title_fullStr |
Development of plug-in air powered four wheels motorcycle drivetrain control unit |
| title_full_unstemmed |
Development of plug-in air powered four wheels motorcycle drivetrain control unit |
| title_sort |
development of plug-in air powered four wheels motorcycle drivetrain control unit |
| publishDate |
2013 |
| url |
http://umpir.ump.edu.my/id/eprint/8653/ http://umpir.ump.edu.my/id/eprint/8653/ http://umpir.ump.edu.my/id/eprint/8653/1/cd8155.pdf |
| first_indexed |
2023-09-18T22:06:27Z |
| last_indexed |
2023-09-18T22:06:27Z |
| _version_ |
1777414740811710464 |