Feasibility of double-layer microchannel fabrication at low speed micro end-mill and wire-cut EDM machines

by Ahmed, Mirghani Ishag, Seder, Islam M.F., Ahmed, Shugata
Published 2014

A comparative analysis of flow boiling in micro-gaps with internal micro-fins of rectangular and triangular profiles

by Ahmed, Shugata, Ismail, Ahmad Faris, Sulaeman, Erwin, Hasan, Muhammad Hasibul
Published 2016

Study on turbulent characteristics of flow boiling in a micro gap under the influence of surface roughness and micro fins

by Ahmed, Shugata, Ismail, Ahmad Faris, Sulaeman, Erwin, Hassan, Muhammad Hasibul
Published 2016

A critical assessment on evaporative cooling performance of micro finned micro gap for high heat flux applications

by Ahmed, Shugata, Ismail, Ahmad Faris, Sulaeman, Erwin, Muhammad, Hasibul Hasan
Published 2016

Effect of geometrical parameters on boiling heat transfer and pressure drop in micro finned micro gap

by Ahmed, Shugata, Hassan, Muhammad Hasibul, Ismail, Ahmad Faris, Sulaeman, Erwin
Published 2016

Experimental correlation for flow-boiling heat transfer in a micro-gap evaporator with internal micro-fins

by Ahmed, Shugata, Ismail, Ahmad Faris, Sulaeman, Erwin, Hasan, Muhammad Hasibul
Published 2019

Two-phase fin-induced turbulent cooling for electronic devices using heat pump associated micro-gap Heat Sink

by Ahmed, Shugata, Sulaeman, Erwin, Ismail, Ahmad Faris, Muhammad, Hasibul Hasan
Published 2018

A critical assessment on evaporative cooling performance of micro finned micro gap for high heat flux applications

by Ahmed, Shugata, Ismail, Ahmad Faris, Sulaeman, Erwin, Hasan, Muhammad Hasibul
Published 2015

Study on turbulent characteristics of flow boiling in a micro gap under the influence of surface roughness and micro fins

by Ahmed, Shugata, Ismail, Ahmad Faris, Sulaeman, Erwin, Hasan, Muhammad Hasibul
Published 2015

Effect of geometrical parameters on boiling heat transfer and pressure drop in micro finned micro gap

by Ahmed, Shugata, Hasan, Muhammad Hasibul, Ismail, Ahmad Faris, Sulaeman, Erwin
Published 2015

A triangular double layer microchannel heat sink: effect of parallel and counter flow

by Manaf, Hazli, Ahmed, Shugata, Ahmed, Mirghani Ishak, Hawlader, Mohammad Nurul Alam
Published 2014

Feasibility of double-layer microchannel fabrication at low speed micro end-mill and wire-cut EDM machines

by Seder, Islam M.F., Ahmed, Mirghani Ishag, Ahmed, Shugata, Hawlader, M.N.A.
Published 2014

Numerical investigation of flow boiling in double-layer microchannel heat sink

by Ahmed, Shugata, Seder, Islam M.F., Ab. Manaf, Hazli, Ahmed, Mirghani Ishak, Hawlader, Mohammad Nurul Alam
Published 2014

Numerical investigation of flow boiling in double-layer microchannel heat sink

by Ahmed, Shugata, Seder, Islam M.F., Ab. Manaf, Hazli, Ahmed, Mirghani Ishak, Hawlader, Mohammad Nurul Alam
Published 2014