Application of permanent magnets for chatter control in end milling of titanium alloy Ti-6Al-4V

by Sulaiman, Syidatul Akma, Amin, A. K. M. Nurul, Arif, Muammer Din
Published 2012

Influence of magnetic field on reduction chatter and of surface roughness in end milling of Titanium Alloy - Ti-6Al-4V

by Sulaiman, Syidatul Akma, Amin, A. K. M. Nurul, Arif, Muammer Din
Published 2012

Optimization of surface roughness in end milling of titanium alloy TI-6AL-4V under the influence of magnetic field from permanents magnets

by Sulaiman, Syidatul Akma, Amin, A. K. M. Nurul, Arif, Muammer Din
Published 2012

Surface roughness model for high speed end milling of soda lime glass using carbide coated tools with compressed air blowing

by Mahmud, M. A., Amin, A. K. M. Nurul, Arif, Muammer Din
Published 2012

Development of mathematical model for chip serration frequency in turning of stainless steel 304 using RSM

by Amin, A. K. M. Nurul, Sulaiman, Syidatul Akma, Arif, Muammer Din
Published 2012

Modeling and optimization of surface roughness and vibration amplitude in heat assisted end milling of SKD 11 tool steel using ball nose tool

by Amin, A. K. M. Nurul, Md. Saad, Muhd Hafiz, Arif, Muammer Din
Published 2012

Optimization of surface roughness in micro-high speed end milling of soda lime glass using uncoated tungsten carbide tool with compressed air blowing

by Amin, A. K. M. Nurul, Nassar, Mahmoud M.A., Arif, Muammer Din
Published 2014

Implementation of magnetic damping to reduce chatter amplitude and tool wear during turning of stainless steel AISI 304

by Amin, A. K. M. Nurul, Mohamad, Ummu Atiqah Khairiyah, Arif, Muammer Din
Published 2014

Optimization of Tool Wear using Coupled RSM-GA Approach in Turning of Stainless Steel AISI 304 with Magnetic Damping of Tool Shank

by Amin, A. K. M. Nurul, Subir, Siti Aminatuzzuhriyah B. Haji, Arif, Muammer Din
Published 2015

Investigation of the effects of machining parameters and air blowing on surface topography in high speed end milling of silicon

by Amin, A. K. M. Nurul, Khalid, Noor Syairah, Mohd Nasir, Siti Nurshahida, Arif, Muammer Din
Published 2012

Statistical approach to modeling & optimization of surface roughness in high speed end milling of silicon with diamond coated tools

by Amin, A. K. M. Nurul, Khalid, Noor Syairah, Mohd Nasir, Siti Nurshahida, Arif, Muammer Din
Published 2012

Surface roughness optimization in end milling of stainless steel AISI 304 with uncoated WC-Co insert under magnetic field

by Amin, A. K. M. Nurul, Sulaiman, Syidatul Akma, Mohd Zainun, Siti Noor Izzati, Arif, Muammer Din
Published 2012

Magnetic damping in turning of stainless steel aisi 304 for the reduction of machining vibration and tool wear

by Amin, A. K. M. Nurul, Arif, Muammer Din, Subir, Siti Aminatuzzuhriyah B. Haji, Abdullah, Fawaz Mohsen
Published 2015

Development of a novel zero point setting device for high speed and micro machining applications

by Amin, A. K. M. Nurul, Mahmud, Md. Asif, Arif, Muammer Din, Derus, Nur Hidayah, Khamis, Siti Salwa
Published 2012

Achievement of ductile regime machining in high speed end milling of soda lime glass by using tungsten carbide tool insert

by Amin, A. K. M. Nurul, Omar, A.A. Che, Kamal, M.A. Mohammed, Nassar, Mahmoud M.A., Mohd Zaib, Noor Fathiah, Arif, Muammer Din
Published 2015

Effect of cutter diameters on surface roughness attained in high speed end milling of soda lime glass

by Amin, A. K. M. Nurul, Omar, A.A. Che, Kamal, M.A.Mohammed, Nassar, Mahmoud M.A., Zaib, N.F. Mohd, Arif, Muammer Din
Published 2015