Risk assessment on plan layout for project mechanical workshop in Politeknik Kuching Sarawak

by Sukindar, Nor Aiman, Ab Tahir, Aliff
Published 2018

An analysis on finding the optimum die angle of polylactic acid in fused deposition modelling

by Sukindar, Nor Aiman, Mohd Ariffin, Mohd Khairol Anuar
Published 2016

Analyzing of fused deposition modeling nozzle for extruding biomaterials

by Sukindar, Nor Aiman, Mohd Ariffin, Mohd Khairol Anuar
Published 2015

Kajian kesan suhu terhadap proses pengeringan halwa terung asam dengan menggunakan ketuhar perolakan

by Ab Tahir, Aliff, Nik Wan Zainun, Wan Hairilamei, Sukindar, Nor Aiman
Published 2018

Transition decision-making framework for remanufacturing: a case study in Malaysia automotive sector

by Misran, Mohd Fakhrur Razi, Roslin, Eida Nadhirah, Mohd Nur, Nurhayati, Othman,, Jamel, Sukindar, Nor Aiman
Published 2019

The Effect of Printing Parameters on Scaffold Structure Using Low-cost 3D Printer

by Sukindar, Nor Aiman, Awang Dahan, Azib Azhari, Abd Halim, Nor Farah Huda, Kamaruddin, Shafie, Sulaiman, Mohd Hafis
Published 2020

Slicer method comparison using open-source 3D printer

by Mohd Ariffin, M K A, Sukindar, Nor Aiman, Baharudin, B.T. H T, Jaafar, C N A, Ismail, M I S
Published 2018

The effect of process parameters in extruding scaffold design using synthetic biomaterials

by Mohd Ariffin, Khairul Anuar, Sukindar, Nor Aiman, Baharudin, B.T. Hang Tuah, Jaafar, Che Nor Aiza, Ismail, Mohd Idris Shah
Published 2019

Analyzing the effect of nozzle diameter in fused deposition modeling for extruding polylactic acid using open source 3D printing

by Sukindar, Nor Aiman, Ariffïn, M.K.A., Baharudin, B. T. Hang Tuah, Jaafar, Che Nor Aiza, Ismail, Mohd Idris Shah
Published 2016

Effects of nozzle die angle on extruding polymethylmethacrylate in open-source 3D printing

by Sukindar, Nor Aiman, Mohd Ariffin, Mohd Khairol Anuar, Baharudin, B. T. Hang Tuah, Jaafar, Che Nor Aiza, Ismail, Mohd Idris Shah
Published 2018

Analysis of mechanical properties of polylactic acid using a new 3D printer nozzle

by Sukindar, Nor Aiman, Mohd Ariffin, Mohd Khairol Anuar, Baharudin, B. T. Hang Tuah, Jaafar, Che Nor Aiza, Ismail, Mohd Idris Shah
Published 2018

Evaluation on the process parameters influencing the surface texture using open-source 3D printing

by Sukindar, Nor Aiman, Mohd Ariffin, Mohd Khairol Anuar, Baharudin, B.T. Hang Tuah, Jaafar, Che Nor Aiza, Ismail, Mohd Idris Shah
Published 2016

Analysis on temperature setting for extruding polylactic acid using open-source 3D printer

by Sukindar, Nor Aiman, Mohd Ariffin, Mohd Khairol Anuar, Baharudin, B. T. Hang Tuah, Jaafar, Che Nor Aiza, Ismail, Mohd Idris Shah
Published 2017

Optimization of the parameters for surface quality of the open-source 3D printing

by Sukindar, Nor Aiman, Mohd Ariffin, Mohd Khairol Anuar, Baharudin, B.T Hang Tuah, Jaafar, Che Nor Aiza, Ismail, Mohd Idris Shah
Published 2017

Analysis on the impact process parameters on tensile strength using 3d printer repetier-host software

by Sukindar, Nor Aiman, Mohd Ariffin, Mohd Khairol Anuar, Baharudin, B. T. Hang Tuah, Jaafar, Che Nor Aiza, Ismail, Mohd Idris Shah
Published 2017

Comparison on dimensional accuracy using a newly developed nozzle for open-source 3D printer

by Sukindar, Nor Aiman, Mohd Ariffin, Mohd Khairol Anuar, Baharudin, B.T. Hang Tuah, Jaafar, Che Nor Aiza, Ismail, Mohd Idris Shah
Published 2016