The effect of deep cryogenic treatment on the properties of AISI D2 tool steel

The effect of deep cryogenic treatment on the properties of AISI D2 tool steel

Bibliographic Details
Main Authors:	Ahmed Ghazal, Belal, Adesta, Erry Yulian Triblas
Format:	Book Chapter
Language:	English
Published:	IIUM Press 2011
Subjects:	TS Manufactures
Online Access:	http://irep.iium.edu.my/21390/ http://irep.iium.edu.my/21390/ http://irep.iium.edu.my/21390/1/34.pdf

Similar Items

The effect of deep cryogenic treatment on the properties of AISI D2 tool steel
by: Adesta, Erry Yulian Triblas, et al.
Published: (2011)

Effects of austempering treatment on mechanical properties of ductile iron
by: Ahmed Ghazal, Belal, et al.
Published: (2011)

Toolpath strategy for cutter life improvement in plunge milling of AISI H13 tool steel
by: Adesta, Erry Yulian Triblas, et al.
Published: (2018)

Relative performances of preheating, cryogenic cooling and hybrid turning of stainless steel AISI 304
by: Amin, A. K. M. Nurul, et al.
Published: (2011)

A new approach of applying cryogenic coolant in turning AISI 304 stainless steel
by: Khan, Ahsan Ali, et al.
Published: (2010)

Experimental investigations in high-speed hard turning of AISI 4340 steel using mixed ceramic
by: Al Hazza, Muataz Hazza Faizi, et al.
Published: (2011)

Heat assisted machining of hardened steel AISI D2
by: Amin, A. K. M. Nurul, et al.
Published: (2011)

Improving tool life using cryogenic cooling
by: Khan, Ahsan Ali, et al.
Published: (2008)

Preheated machining in end milling of hardened steel AISI D2
by: Lajis, M. A., et al.
Published: (2008)

Effect of cryogenic cooling during grinding of mild steel and stainless steel
by: Khan, Ahsan Ali, et al.
Published: (2008)

Influence of backcutting phenomena to surface roughness of hardened AISI H13 during high speed end milling process
by: Mohd Ali, Afifah, et al.
Published: (2011)

The effect of cryogenic cooling in machinability of stainless steel during turning
by: Amin, A. K. M. Nurul, et al.
Published: (2011)

An investigation on low-temperature thermochemical treatments of austenitic stainless steel in fluidized bed furnace
by: Haruman, Esa, et al.
Published: (2012)

Multi-criteria optimization in end milling of AISI D2 hardened steel using coated carbide inserts
by: Karim, A.N. Mustafizul, et al.
Published: (2011)

Prediction of tool life and experimental investigation during hot milling of AISI H13 tool steel
by: Amin, A. K. M. Nurul, et al.
Published: (2010)

Content comparative investigation on tool wear during end milling of AISI H13 steel with different tool path strategies
by: Adesta, Erry Yulian Triblas, et al.
Published: (2017)

Microstructural properties of semisolid welded joints for AISI D2 Tool Steel
by: Mohammed, M.N., et al.
Published: (2014)

Performance studies on cryogenic treated carbide cutting tool for turning of AISI304 steel
by: Patil, Nagraj, et al.
Published: (2018)

Hardware improvement of FDM 3D printer: issue of bed leveling failures
by: Arief, Rudi Kurniawan, et al.
Published: (2019)

A feasibility study on low temperature thermochemical treatments of Austenitic Stainless Steel in Fluidized Bed Furnace
by: Haruman, Esa, et al.
Published: (2011)

Performance evaluation of PCBN in end milling of AISI D2 hardened steel under room and preheated machining conditions
by: Lajis, Mohd Amri, et al.
Published: (2011)

Surface roughness optimization using Taguchi method of high speed end milling for hardened steel D2
by: Al Hazza, Muataz Hazza Faizi, et al.
Published: (2017)

Flank wear analysing of high speed end milling for hardened steel D2 using Taguchi method
by: Al Hazza, Muataz Hazza Faizi, et al.
Published: (2017)

Efficient cryogenic cooling during machining of rolled AISI 4340 steel
by: Ahmed, Mirghani Ishak, et al.
Published: (2012)

New tool life models in turning hardened steel AISI 4340 under high cutting speed
by: Adesta, Erry Yulian Triblas, et al.
Published: (2011)

Total productive maintenance (TPM) implementation based on lean manufacturing tools in Indonesian manufacturing industries
by: Adesta, Erry Yulian Triblas, et al.
Published: (2018)

Tool life in high speed turning with negative rake angle
by: Adesta, Erry Yulian Triblas, et al.
Published: (2011)

Surface Modiﬁcation of AISI H13 Tool Steel by Laser Cladding with NiTi Powder
by: B., Norhafzan, et al.
Published: (2016)

Influence of machining parameters on surface roughness during EDM of mild steel
by: Khan, Ahsan Ali, et al.
Published: (2011)

Influence of process parameters on surface integrity during EDM of mild steel
by: Khan, Ahsan Ali, et al.
Published: (2010)

Development of surface roughness prediction model for high speed end milling of hardened tool steel
by: Mohd Ali , Afifah, et al.
Published: (2011)

A study of parameters relationship to backcutting phenomena during high speed end milling of AISI H13
by: Adesta, Erry Yulian Triblas, et al.
Published: (2010)

Development of tooling cost model in high speed hard turning
by: Al Hazza, Muataz Hazza Faizi, et al.
Published: (2011)

Formation of micro-cracks and recast layer during EDM of mild steel using copper electrodes
by: Khan, Ahsan Ali, et al.
Published: (2011)

Implementation of magnetic damping to reduce chatter amplitude and tool wear during turning of stainless steel AISI 304
by: Amin, A. K. M. Nurul, et al.
Published: (2014)

Cost Model for end-milling of AISI D2 tool steel
by: Mohamed, Elhadie, et al.
Published: (2011)

The evaluation of lean manufacturing implementation and their impact to manufacturing performance
by: Adesta, Erry Yulian Triblas, et al.
Published: (2018)

Effect of welding process on formability of tailor welded blanks
by: Mushtaq, Umer, et al.
Published: (2011)

Cutting force impact to tool life of CT5015 in high speed machining by applying negative rake angles
by: Adesta, Erry Yulian Triblas, et al.
Published: (2012)

The Effect of Heat Treatment on The Hardness and Impact Properties of Medium Carbon Steel
by: Nurul Aida, Amir Khatif, et al.
Published: (2015)

Cannot write session to /tmp/vufind_sessions/sess_ianr9ss77hohgsd658msl4dcrq