A new technique to improve the machinability of hardened steel AISI H13 in end milling
Hardened materials like AISI H13 steel are generally regarded as difficult to cut materials because of their high hardness due to high carbon content, which however allows them to be used extensively as the hot working tools like, dies and moulds. The challenges in machining this steel in hardened...
| Main Authors: | , , , |
|---|---|
| Format: | Conference or Workshop Item |
| Language: | English |
| Published: |
2010
|
| Subjects: | |
| Online Access: | http://irep.iium.edu.my/22644/ http://irep.iium.edu.my/22644/1/p128.pdf |
| Summary: | Hardened materials like AISI H13 steel are generally regarded as difficult to cut materials because of
their high hardness due to high carbon content, which however allows them to be used extensively as the
hot working tools like, dies and moulds. The challenges in machining this steel in hardened state led to
many research works dedicated towards enhancing its machinability. In this work, preheating technique
has been used to improve machinability of the material under different cutting conditions... |
|---|