5.5-10.5 GHz IR-UWB Pulse Generator for Narrowband Interference Mitigation

An impulse radio ultra wideband (IR-UWB) pulse generator works between 5.5-10.5 GHz for narrowband interference mitigation is proposed. With an average power of -85 dBm/MHz from 0-5 GHz, high interference avoidance has been achieved for a wide range of narrowband systems including Global Positioning...

Full description

Bibliographic Details
Main Authors:	Ahmed R., Mohammed, Khalid A. S., Al-Khateeb, Islam, Md. Rafiqul
Format:	Conference or Workshop Item
Language:	English
Published:	IEEE 2012
Subjects:	TK7885 Computer engineering
Online Access:	http://irep.iium.edu.my/23031/ http://irep.iium.edu.my/23031/ http://irep.iium.edu.my/23031/ http://irep.iium.edu.my/23031/1/5.5-10.5_GHz_IR-UWB_Pulse_Generator_for.pdf

id	iium-23031
recordtype	eprints
spelling	iium-230312017-07-31T02:13:52Z http://irep.iium.edu.my/23031/ 5.5-10.5 GHz IR-UWB Pulse Generator for Narrowband Interference Mitigation Ahmed R., Mohammed Khalid A. S., Al-Khateeb Islam, Md. Rafiqul TK7885 Computer engineering An impulse radio ultra wideband (IR-UWB) pulse generator works between 5.5-10.5 GHz for narrowband interference mitigation is proposed. With an average power of -85 dBm/MHz from 0-5 GHz, high interference avoidance has been achieved for a wide range of narrowband systems including Global Positioning System (GPS), Worldwide Interoperability for Microwave Access (WiMAX), Wireless Local Area Network (WLAN) 802.11b and 802.11a. The proposed pulse generator utilizes a 1 GHz sine wave power source to work with the designed half-wave rectifier. The generated pulse width is less than 1 ns, providing a speed of about 1 Gb/s for IR-UWB system with minimum modulation complexity. A passive low pass filter (LPF) is designed with a cutoff frequency of 1.5 GHz works with the circuit up-converter mixer to generate a pulse which matches the Federal Communication Commission (FCC) requirements of UWB. The design has been carried out using Advanced Design System (ADS) software. The proposed pulse generator is supported by different modulation techniques like on-off keying (OOK) and pulse position modulation (PPM). IEEE 2012 Conference or Workshop Item PeerReviewed application/pdf en http://irep.iium.edu.my/23031/1/5.5-10.5_GHz_IR-UWB_Pulse_Generator_for.pdf Ahmed R., Mohammed and Khalid A. S., Al-Khateeb and Islam, Md. Rafiqul (2012) 5.5-10.5 GHz IR-UWB Pulse Generator for Narrowband Interference Mitigation. In: 2012 International Conference on Computer and Communication Engineering, ICCCE 2012, 3-5 Jul 2012, Kuala Lumpur. http://ieeexplore.ieee.org/xpl/articleDetails.jsp?reload=true&arnumber=6271151&contentType=Conference+Publications 10.1109/ICCCE.2012.6271151
repository_type	Digital Repository
institution_category	Local University
institution	International Islamic University Malaysia
building	IIUM Repository
collection	Online Access
language	English
topic	TK7885 Computer engineering
spellingShingle	TK7885 Computer engineering Ahmed R., Mohammed Khalid A. S., Al-Khateeb Islam, Md. Rafiqul 5.5-10.5 GHz IR-UWB Pulse Generator for Narrowband Interference Mitigation
description	An impulse radio ultra wideband (IR-UWB) pulse generator works between 5.5-10.5 GHz for narrowband interference mitigation is proposed. With an average power of -85 dBm/MHz from 0-5 GHz, high interference avoidance has been achieved for a wide range of narrowband systems including Global Positioning System (GPS), Worldwide Interoperability for Microwave Access (WiMAX), Wireless Local Area Network (WLAN) 802.11b and 802.11a. The proposed pulse generator utilizes a 1 GHz sine wave power source to work with the designed half-wave rectifier. The generated pulse width is less than 1 ns, providing a speed of about 1 Gb/s for IR-UWB system with minimum modulation complexity. A passive low pass filter (LPF) is designed with a cutoff frequency of 1.5 GHz works with the circuit up-converter mixer to generate a pulse which matches the Federal Communication Commission (FCC) requirements of UWB. The design has been carried out using Advanced Design System (ADS) software. The proposed pulse generator is supported by different modulation techniques like on-off keying (OOK) and pulse position modulation (PPM).
format	Conference or Workshop Item
author	Ahmed R., Mohammed Khalid A. S., Al-Khateeb Islam, Md. Rafiqul
author_facet	Ahmed R., Mohammed Khalid A. S., Al-Khateeb Islam, Md. Rafiqul
author_sort	Ahmed R., Mohammed
title	5.5-10.5 GHz IR-UWB Pulse Generator for Narrowband Interference Mitigation
title_short	5.5-10.5 GHz IR-UWB Pulse Generator for Narrowband Interference Mitigation
title_full	5.5-10.5 GHz IR-UWB Pulse Generator for Narrowband Interference Mitigation
title_fullStr	5.5-10.5 GHz IR-UWB Pulse Generator for Narrowband Interference Mitigation
title_full_unstemmed	5.5-10.5 GHz IR-UWB Pulse Generator for Narrowband Interference Mitigation
title_sort	5.5-10.5 ghz ir-uwb pulse generator for narrowband interference mitigation
publisher	IEEE
publishDate	2012
url	http://irep.iium.edu.my/23031/ http://irep.iium.edu.my/23031/ http://irep.iium.edu.my/23031/ http://irep.iium.edu.my/23031/1/5.5-10.5_GHz_IR-UWB_Pulse_Generator_for.pdf
first_indexed	2023-09-18T20:34:55Z
last_indexed	2023-09-18T20:34:55Z
_version_	1777408981722988544

5.5-10.5 GHz IR-UWB Pulse Generator for Narrowband Interference Mitigation

Similar Items