On the use of low and high cycle fatigue damage models
In this paper, Continuum Damage Mechanics (CDM) theory is applied to low cycle and high cycle fatigue problems. Damage evolution laws are derived from thermodynamic principles and fatigue number of cycles to crack initiation is expressed in terms of the range of applied stresses, triaxiality functio...
Main Authors: | Abdel Wahab, Magd, Hilmy, Irfan, Hojjati-Talemi, Reza |
---|---|
Format: | Article |
Language: | English |
Published: |
Trans Tech Publications, Switzerland
2013
|
Subjects: | |
Online Access: | http://irep.iium.edu.my/32101/ http://irep.iium.edu.my/32101/ http://irep.iium.edu.my/32101/1/2013_KEM.pdf |
Similar Items
-
Finite element modelling of damage fracture and fretting fatigue
by: Wahab, M. Abdel, et al.
Published: (2012) -
Evaluation of fatigue damage in adhesive bonding:
Part 1: Bulk adhesive
by: Wahab, Magd Abdel, et al.
Published: (2010) -
Monitoring of fatigue damage using ultrasonics and finite element analysis
by: Hrairi, Meftah, et al.
Published: (2012) -
Damage detection based on the natural frequency shifting of
a clamped rectangular plate model
by: Hilmy, Irfan, et al.
Published: (2015) -
Discretized Markov Chain in Damage Assessment Using Rainflow Cycle with Effects of Mean Stress On An Automobile Crankshaft
by: Singh, Salvinder, et al.
Published: (2016)