Development and Analysis of Arrow for Archery

This project is about the development and analysis of arrow for archery. 3 types of arrow head been designed: bullet shaped head, 3D shaped head and cone shaped head. The arrow performance measurement parameters were studied such as the FOC values, static stiffness values and the drag forces. SolidW...

Full description

Bibliographic Details
Main Authors:	Wong, Fei Yong, Zulkifli, Ahmad@Manap, Idris, Mat Sahat
Format:	Conference or Workshop Item
Language:	English English
Published:	2015
Subjects:	TJ Mechanical engineering and machinery
Online Access:	http://umpir.ump.edu.my/id/eprint/10535/ http://umpir.ump.edu.my/id/eprint/10535/1/DEVELOPMENT%20AND%20ANALYSIS%20OF%20ARROW%20FOR%20ARCHERY.pdf http://umpir.ump.edu.my/id/eprint/10535/7/fkm-2015-wong-development%20and%20analysis.pdf

id	ump-10535
recordtype	eprints
spelling	ump-105352018-02-02T07:31:35Z http://umpir.ump.edu.my/id/eprint/10535/ Development and Analysis of Arrow for Archery Wong, Fei Yong Zulkifli, Ahmad@Manap Idris, Mat Sahat TJ Mechanical engineering and machinery This project is about the development and analysis of arrow for archery. 3 types of arrow head been designed: bullet shaped head, 3D shaped head and cone shaped head. The arrow performance measurement parameters were studied such as the FOC values, static stiffness values and the drag forces. SolidWorks 2012 was used to designs the three types of arrow head and the drag force is simulated by using SolidWork Flow Simulation. The material used for the arrow head fabrication is stainless steel 304. The arrow shafts used are carbon shaft of 5.46mm outer diameter and 7mm fiberglass and carbon fiber shaft. 3 different shaft properties are used to determine the effect of static stiffness, arrow heads weight and shaft diameter on the drag force generated at the arrow. The experimented result for Beman 570-14 arrows are slightly higher compared to simulation results obtained from SolidWorks. The possible cause is the characteristic of the arrow during flight where arrows starts to bend in C manner then straight again then bend again in reverse C manner and so on when it been shot. These deformation causes energy losses to the surrounding due to air friction, natural damping effect and shear friction. From the result obtained, it is shown that fiberglass shaft arrow has the highest drag force regardless of the arrow head types used compared to the other two types of shaft. Although Beman 570-14 shaft has smaller frontal area compared to a 7mm outer diameter carbon fiber shaft, the drag force obtained from the experiment shows that both bullet shaped head and 3D shaped head for carbon fiber shaft has lower drag force compared with the same arrow head shape. 2015 Conference or Workshop Item NonPeerReviewed application/pdf en http://umpir.ump.edu.my/id/eprint/10535/1/DEVELOPMENT%20AND%20ANALYSIS%20OF%20ARROW%20FOR%20ARCHERY.pdf application/pdf en http://umpir.ump.edu.my/id/eprint/10535/7/fkm-2015-wong-development%20and%20analysis.pdf Wong, Fei Yong and Zulkifli, Ahmad@Manap and Idris, Mat Sahat (2015) Development and Analysis of Arrow for Archery. In: International Conference On Industrial And Design Engineering (INCIDE2015), 12-13 September 2015 , Putrajaya. pp. 1-7.. (Unpublished)
repository_type	Digital Repository
institution_category	Local University
institution	Universiti Malaysia Pahang
building	UMP Institutional Repository
collection	Online Access
language	English English
topic	TJ Mechanical engineering and machinery
spellingShingle	TJ Mechanical engineering and machinery Wong, Fei Yong Zulkifli, Ahmad@Manap Idris, Mat Sahat Development and Analysis of Arrow for Archery
description	This project is about the development and analysis of arrow for archery. 3 types of arrow head been designed: bullet shaped head, 3D shaped head and cone shaped head. The arrow performance measurement parameters were studied such as the FOC values, static stiffness values and the drag forces. SolidWorks 2012 was used to designs the three types of arrow head and the drag force is simulated by using SolidWork Flow Simulation. The material used for the arrow head fabrication is stainless steel 304. The arrow shafts used are carbon shaft of 5.46mm outer diameter and 7mm fiberglass and carbon fiber shaft. 3 different shaft properties are used to determine the effect of static stiffness, arrow heads weight and shaft diameter on the drag force generated at the arrow. The experimented result for Beman 570-14 arrows are slightly higher compared to simulation results obtained from SolidWorks. The possible cause is the characteristic of the arrow during flight where arrows starts to bend in C manner then straight again then bend again in reverse C manner and so on when it been shot. These deformation causes energy losses to the surrounding due to air friction, natural damping effect and shear friction. From the result obtained, it is shown that fiberglass shaft arrow has the highest drag force regardless of the arrow head types used compared to the other two types of shaft. Although Beman 570-14 shaft has smaller frontal area compared to a 7mm outer diameter carbon fiber shaft, the drag force obtained from the experiment shows that both bullet shaped head and 3D shaped head for carbon fiber shaft has lower drag force compared with the same arrow head shape.
format	Conference or Workshop Item
author	Wong, Fei Yong Zulkifli, Ahmad@Manap Idris, Mat Sahat
author_facet	Wong, Fei Yong Zulkifli, Ahmad@Manap Idris, Mat Sahat
author_sort	Wong, Fei Yong
title	Development and Analysis of Arrow for Archery
title_short	Development and Analysis of Arrow for Archery
title_full	Development and Analysis of Arrow for Archery
title_fullStr	Development and Analysis of Arrow for Archery
title_full_unstemmed	Development and Analysis of Arrow for Archery
title_sort	development and analysis of arrow for archery
publishDate	2015
url	http://umpir.ump.edu.my/id/eprint/10535/ http://umpir.ump.edu.my/id/eprint/10535/1/DEVELOPMENT%20AND%20ANALYSIS%20OF%20ARROW%20FOR%20ARCHERY.pdf http://umpir.ump.edu.my/id/eprint/10535/7/fkm-2015-wong-development%20and%20analysis.pdf
first_indexed	2023-09-18T22:10:15Z
last_indexed	2023-09-18T22:10:15Z
_version_	1777414979145695232

Development and Analysis of Arrow for Archery

Similar Items